Oropharyngeal airway allows a fast and easy way to establish a patent airway by
Oropharyngeal airway allows a fast and easy way to establish a patent airway by holding the tongue up and out of the way. Size - 40 mm.
SH 7-2 Five-in-One Connector connects tubing with inside diameters from 3/16" to
SH 7-2 Five-in-One Connector connects tubing with inside diameters from 3/16" to 7/16". Barbed edges on each step help to prevent disconnects. Single Patient Use
Reducing Adapter for use in breathing/ventilator circuit. - 10mm O.D. x 22mm I.D
Reducing Adapter for use in breathing/ventilator circuit. - 10mm O.D. x 22mm I.D. Molded of polycarbonate. Reusable.
CAI
Circuit, Breathing (W Connector, Adaptor, Y Piece)
General Adapter 10mm OD x 10mm OD. Fits components of neonatal ventilator circui
General Adapter 10mm OD x 10mm OD. Fits components of neonatal ventilator circuits/CPAP systems. Molded of polysulfone. Reusable.
CAI
Circuit, Breathing (W Connector, Adaptor, Y Piece)
The SG 066-2N 1 liter latex-free reservoir bag is intended to be used with the S
The SG 066-2N 1 liter latex-free reservoir bag is intended to be used with the SG 066 Oxygen Enrichment Kit, while in use on certain ventilators to provide higher concentrations of oxygen to the patient by mixing room air with an oxygen source at the proximal airway.
The Instrumentation Industries, Inc. RTC 23-D is an actuator for intermittent de
The Instrumentation Industries, Inc. RTC 23-D is an actuator for intermittent delivery of prescribed aerosol medication dispensed in metered dose inhalers. The RTC 23-D Adapter is intended for use only when connected to ventilator tubing or tracheal tubes. For use with metered dose inhaler canisters with standard size metal or plastic stems.The RTC 23-D Adapter is intended for Single Patient Reuse. This device is intended for sale by or on the order of a physician.
The Instrumentation Industries, Inc. RTC 23-A is an actuator for intermittent de
The Instrumentation Industries, Inc. RTC 23-A is an actuator for intermittent delivery of prescribed aerosol medication dispensed in metered dose inhalers. The RTC 23-A Adapter is intended for use only when connected to ventilator tubing or tracheal tubes. For use with metered dose inhaler canisters with standard size metal or plastic stems.The RTC 23-A Adapter is intended for Single Patient Reuse. This device is intended for sale by or on the order of a physician.
This reusable exhalation valve is designed for use with ventilators. The exhala
This reusable exhalation valve is designed for use with ventilators. The exhalation valve prevents the inspired gases from escaping through the passage that will be made available to expired gases via an inflatable balloon. Also, the re-breathing of the expired gases are prevented by the balloon action.
CBP
Valve, Non-Rebreathing
2
PS 54AL Low Resistance Exhalation Valve with Water Trap
Straight Connector - 15mm ID x 15mm ID. Fits components of pediatric ventilator
Straight Connector - 15mm ID x 15mm ID. Fits components of pediatric ventilator circuits. Molded of silicone rubber. Reusable.
CAI
Circuit, Breathing (W Connector, Adaptor, Y Piece)
Straight Connector - 10mm ID x 10mm ID. Fits components of neonatal ventilator c
Straight Connector - 10mm ID x 10mm ID. Fits components of neonatal ventilator circuits. Molded of silicone rubber. Reusable.
CAI
Circuit, Breathing (W Connector, Adaptor, Y Piece)
The Instrumentation Industries, Inc. NS Series Negative Inspiratory Force (NIF)
The Instrumentation Industries, Inc. NS Series Negative Inspiratory Force (NIF) Meters are devices used to measure and monitor patient inspiratory effort. During use the NIF Meter is attached to the patient airway at a point that provides optimal readings of patient respiratory effort. Federal law restricts these devices to sale by or on the order of a physician.
The Instrumentation Industries, Inc. NS Series Negative Inspiratory Force (NIF)
The Instrumentation Industries, Inc. NS Series Negative Inspiratory Force (NIF) Meters are devices used to measure and monitor patient inspiratory effort. During use the NIF Meter is attached to the patient airway at a point that provides optimal readings of patient respiratory effort. Federal law restricts these devices to sale by or on the order of a physician.
The Instrumentation Industries, Inc. NS Series Negative Inspiratory Force (NIF)
The Instrumentation Industries, Inc. NS Series Negative Inspiratory Force (NIF) Meters are devices used to measure and monitor patient inspiratory effort. During use the NIF Meter is attached to the patient airway at a point that provides optimal readings of patient respiratory effort. Federal law restricts these devices to sale by or on the order of a physician.
This reusable exhalation valve is designed for use with ventilators. The exhala
This reusable exhalation valve is designed for use with ventilators. The exhalation valve prevents the inspired gases from escaping through the passage that will be made available to expired gases via an inflatable balloon. Also, the re-breathing of the expired gases are prevented by the balloon action.
The MT 100 Oxygen Sensor Activation System is designed for use with the Maxtec H
The MT 100 Oxygen Sensor Activation System is designed for use with the Maxtec Handi Oxygen Analyzer. By utilizing a check valve in the Tee Adapter, an airtight seal is maintained in-line, unless actuated by the stem of the activator. This system therefore provides the capability of rapid monitoring of the patient breathing environment without the inconvenience of breaking the ventilation circuit.
The MS 101-40 Pressure Adapter: Dimensions - Barbed Port fits 3/16" tubing x 1
The MS 101-40 Pressure Adapter: Dimensions - Barbed Port fits 3/16" tubing x 15mm I.D. x 15mm I.D.
90 degree Elbow Connector with Barbed Port that fits 3/16" ID tubing - 15mm ID/2
90 degree Elbow Connector with Barbed Port that fits 3/16" ID tubing - 15mm ID/22mm OD x15mm OD. Molded of polycarbonate. Reusable.
CAI
Circuit, Breathing (W Connector, Adaptor, Y Piece)
The KC 145-2230D Hose Connector: Dimensions - 22mm I.D/30mm O.D. x tapered barb
The KC 145-2230D Hose Connector: Dimensions - 22mm I.D/30mm O.D. x tapered barb adapter. This is a single patient use device
KC 060-P22 - 60" length Reusable Ventilator Tubing (15mm ID tube with 22mm ID cu
KC 060-P22 - 60" length Reusable Ventilator Tubing (15mm ID tube with 22mm ID cuffs). Cream-colored polyester elastomer tube with cream-colored silicone rubber cuffs.
BZO
Set, Tubing And Support, Ventilator (W Harness)
1
KC 060-P22 - Reusable Ventilator Tubing (15mm tube with 22mm ID cuffs)
KC 036-5N - 36" length, 10mm ID, Clear Ventilator Tubing with Integral Cuffs. F
KC 036-5N - 36" length, 10mm ID, Clear Ventilator Tubing with Integral Cuffs. For Single Patient Use.
BZO
Set, Tubing And Support, Ventilator (W Harness)
1
KC 036-5N 10mm ID Ventilator Tubing with Integral Cuffs
The KC 00.5N-2P is a 1/2-liter neoprene reservoir bag intended to store breathin
The KC 00.5N-2P is a 1/2-liter neoprene reservoir bag intended to store breathing gas during the respiratory cycle. The breathing bag may be on the inspiratory or expiratory limb of a breathing circuit depending on the breathing circuit design. This is a single-use device.
The KC 002N-2P is a 2-liter neoprene reservoir bag intended to store breathing g
The KC 002N-2P is a 2-liter neoprene reservoir bag intended to store breathing gas during the respiratory cycle. The breathing bag may be on the inspiratory or expiratory limb of a breathing circuit depending on the breathing circuit design. This is a single-use device.
The BE 183-SUR Manual Jet Ventilator is designed to provide trans-tracheal venti
The BE 183-SUR Manual Jet Ventilator is designed to provide trans-tracheal ventilation in specific emergency situations of upper airway obstructions. This system is used in conjunction with a trans-tracheal catheter, or cricothyrotomy needle, which is inserted through the cricothyroid membrane. Ventilation is accomplished by the manual, intermittent jetting of oxygen through the catheter for subsequent lung inflation.
The BE 183-SUR-12 Manual Jet Ventilator is designed to provide trans-tracheal ve
The BE 183-SUR-12 Manual Jet Ventilator is designed to provide trans-tracheal ventilation in specific emergency situations of upper airway obstructions. This system is used in conjunction with a trans-tracheal catheter, or cricothyrotomy needle, which is inserted through the cricothyroid membrane. Ventilation is accomplished by the manual, intermittent jetting of oxygen through the catheter for subsequent lung inflation.
The BE 148-5-1 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Gaug
The BE 148-5-1 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Gauges. The BE 148-5-1 securely mounts Gauges with a rear 1/4" NPT thread to 3/4" diameter poles.
The BE 183-SU-12 Manual Jet Ventilator is designed to provide trans-tracheal ven
The BE 183-SU-12 Manual Jet Ventilator is designed to provide trans-tracheal ventilation in specific emergency situations of upper airway obstructions. This system is used in conjunction with a trans-tracheal catheter, or cricothyrotomy needle, which is inserted through the cricothyroid membrane. Ventilation is accomplished by the manual, intermittent jetting of oxygen through the catheter for subsequent lung inflation.
The BE 183-SU Manual Jet Ventilator is designed to provide trans-tracheal ventil
The BE 183-SU Manual Jet Ventilator is designed to provide trans-tracheal ventilation in specific emergency situations of upper airway obstructions. This system is used in conjunction with a trans-tracheal catheter, or cricothyrotomy needle, which is inserted through the cricothyroid membrane. Ventilation is accomplished by the manual, intermittent jetting of oxygen through the catheter for subsequent lung inflation.
The Instrumentation Industries, Inc. BE 149-1 Gauge Adapter has a 1/4" NPT conne
The Instrumentation Industries, Inc. BE 149-1 Gauge Adapter has a 1/4" NPT connection on one end and a 15 mm I.D./22 mm O.D. connection on the other end for inspiratory monitoring.The BE 149-1 is designed to work with III Vacuum/Pressure Gauges and NIF Meters.The adapter is made of polycarbonate.
The BE 125 Tee Adapter is intended for use in a ventilator, oxygen or BIPAP circ
The BE 125 Tee Adapter is intended for use in a ventilator, oxygen or BIPAP circuit. Dimensions: 22mm O.D. x 15mm I.D./22mm O.D. x 15mm O.D./22mm O.D Reusable.
CAI
Circuit, Breathing (W Connector, Adaptor, Y Piece)
The BE114-5TB Flexible Support Arm Single Tubing Clamp holds a ventilator tube i
The BE114-5TB Flexible Support Arm Single Tubing Clamp holds a ventilator tube in place when attached to an III "Flexible Support Arm". Made of polypropylene with phenolic ball knob mount. Made in the USA.
JAY
Support, Breathing Tube
1
BE114-5TB Flexible Support Arm Single Tubing Clamp
The BE 114-2 Flexible Support Arm Pole Bracket permits mounting of "Flexible Sup
The BE 114-2 Flexible Support Arm Pole Bracket permits mounting of "Flexible Support Arms" to poles up to 1.5" in diameter. Components and materials: bracket body: anodized aluminum; screw: steel with phenolic handle. Made in the USA.
General Adapter - 22mm ID x 22mm ID adapter for use in breathing/ventilator circ
General Adapter - 22mm ID x 22mm ID adapter for use in breathing/ventilator circuit. Molded of polystyrene butadiene, Single Patient Use.
CAI
Circuit, Breathing (W Connector, Adaptor, Y Piece)
Manometer, Pressure, -40 to +80 cmH2O w/ Max Hold on "T", 22mmF x 22mmM/15mmF, C
Manometer, Pressure, -40 to +80 cmH2O w/ Max Hold on "T", 22mmF x 22mmM/15mmF, Chrome Brass
Manometer, Pole Mount Clamp, MRI Cond 3T, for 3/8" to 1.5" dia Pole, w/Hardware,
Manometer, Pole Mount Clamp, MRI Cond 3T, for 3/8" to 1.5" dia Pole, w/Hardware, fits 00-199-MRI Gauges
Manometer, Pole Mount Clamp, Large, for 3/8" to 1.5" dia Pole, w/Hardware, fits
Manometer, Pole Mount Clamp, Large, for 3/8" to 1.5" dia Pole, w/Hardware, fits all 00-199, 00-274 Gauges
Manometer, Pole Mount Clamp, for 1/4" to 1" dia Pole, w/Hardware, fits all 00-19
Manometer, Pole Mount Clamp, for 1/4" to 1" dia Pole, w/Hardware, fits all 00-199, 00-274 Gauges
Manometer, Pressure, -40 to +80 cm H2O, 1/4" NPT-M, w/Max Hold Pointer, 2.5"Dia,
Manometer, Pressure, -40 to +80 cm H2O, 1/4" NPT-M, w/Max Hold Pointer, 2.5"Dia, Front Zero-Adjust
Manometer, Pressure, -40 to +80 cm H2O, 1/4" NPT-M Bottom-Mount, 2.5"Dia, Front
Manometer, Pressure, -40 to +80 cm H2O, 1/4" NPT-M Bottom-Mount, 2.5"Dia, Front Zero-Adjust
Manometer, Wall Mount Dovetail, Removable Vertical Mount w/Hardware, fits all 00
Manometer, Wall Mount Dovetail, Removable Vertical Mount w/Hardware, fits all 00-199, 00-274 Gauges
Gauge Guard for 00-199, 2.5', 1/2" Back and Bottom Mount, Blue, Alcryn MPR Witho
Gauge Guard for 00-199, 2.5', 1/2" Back and Bottom Mount, Blue, Alcryn MPR Without Hook and Loop Fastener. Fits 00-199 and related products (LF)
Gauge Guard, Use on all 00-199 (2.5', Bottom/Back Mount) Gauge Products, Mount S
Gauge Guard, Use on all 00-199 (2.5', Bottom/Back Mount) Gauge Products, Mount Strip, Blue Alcryn MPR.
The RB 004 Gauge Rail Clamp is an accessory to the NS Series Vacuum/Pressure Gau
The RB 004 Gauge Rail Clamp is an accessory to the NS Series Vacuum/Pressure Gauges. The RB 004 is used to securely mount Gauges with a rear 1/4" NPT thread to rails. For use with Fairfield-style rails only.
During ventilation, the NS Series Cuff Pressure Monitors are devices used to per
During ventilation, the NS Series Cuff Pressure Monitors are devices used to periodically monitor endotracheal or tracheostomy tube balloon pressure to assure an adequate seal between the tube and the tracheal wall.These devices are intended to be used by or on the order of a physician.
The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devi
The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devices used to monitor patient airway pressure during ventilation within a breathing circuit. The pressure gauge is placed in the patient circuit at a point that provides optimal airway pressure readings. These devices are intended to be used by or on the order of a physician.
During ventilation, the NS Series Cuff Pressure Monitors are devices used to per
During ventilation, the NS Series Cuff Pressure Monitors are devices used to periodically monitor endotracheal or tracheostomy tube balloon pressure to assure an adequate seal between the tube and the tracheal wall.These devices are intended to be used by or on the order of a physician.
The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devi
The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devices used to monitor patient airway pressure during ventilation within a breathing circuit. The pressure gauge is placed in the patient circuit at a point that provides optimal airway pressure readings. These devices are intended to be used by or on the order of a physician.
The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devi
The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devices used to monitor patient airway pressure during ventilation within a breathing circuit. The pressure gauge is placed in the patient circuit at a point that provides optimal airway pressure readings. These devices are intended to be used by or on the order of a physician.
The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devi
The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devices used to monitor patient airway pressure during ventilation within a breathing circuit. The pressure gauge is placed in the patient circuit at a point that provides optimal airway pressure readings. These devices are intended to be used by or on the order of a physician.
The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devi
The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devices used to monitor patient airway pressure during ventilation within a breathing circuit. The pressure gauge is placed in the patient circuit at a point that provides optimal airway pressure readings. These devices are intended to be used by or on the order of a physician.
The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devi
The Instrumentation Industries, Inc. NS Series Airway Pressure Monitors are devices used to monitor patient airway pressure during ventilation within a breathing circuit. The pressure gauge is placed in the patient circuit at a point that provides optimal airway pressure readings. These devices are intended to be used by or on the order of a physician.
The Instrumentation Industries, Inc. NS 120P-TRS Airway Pressure Monitor is a de
The Instrumentation Industries, Inc. NS 120P-TRS Airway Pressure Monitor is a device used to monitor patient airway pressure during ventilation with a manual resuscitation device or bag/mask unit. This device is intended to be used by or on the order of a physician.
The BE 148-5-3.5 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Ga
The BE 148-5-3.5 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Gauges. The BE 148-5-3.5 is used to securely mount Gauges with a rear 1/4" NPT thread to medical equipment such as poles, incubators, ventilators, etc. The BE 148-5-3.5 gauge clamp works with equipment that requires a clamp having a 2-1/2" to 3-1/2" opening.
The BE 148-5-2.5 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Ga
The BE 148-5-2.5 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Gauges. The BE 148-5-2.5 is used to securely mount Gauges with a rear 1/4" NPT thread to medical equipment such as poles, incubators, ventilators, etc. The BE 148-5-2.5 clamp works with equipment that requires a clamp having a 1" to 2-1/2" opening.
The BE 148-5-2 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Gaug
The BE 148-5-2 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Gauges. The BE 148-5-2 securely mounts Gauges with a rear 1/4" NPT thread to poles with 3/4" to 1-1/2" diameter.
The BE 148-5-1 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Gaug
The BE 148-5-1 Gauge Clamp is an accessory to the NS Series Vacuum/Pressure Gauges. The BE 148-5-1 securely mounts Gauges with a rear 1/4" NPT thread to 3/4" diameter poles.
The BE 148-4 Cuff Pressure Monitor Adapter attaches to NS Series gauges with a 1
The BE 148-4 Cuff Pressure Monitor Adapter attaches to NS Series gauges with a 1/4" NPT fitting to create a Cuff Pressure Monitor. During ventilation, the NS Series Cuff Pressure Monitors are devices used to periodically monitor endotracheal or tracheostomy tube balloon pressure to assure an adequate seal between the tube and the tracheal wall.These devices are intended to be used by or on the order of a physician.