| No | Primary DI | Version or Model | Catalog Number | Device Description | Product Code | Product Code Name | Device Class | Brand Name |
|---|---|---|---|---|---|---|---|---|
| 1 | M849G11200400 | G1120040 | 4581-U | An assembly of devices that uses radio-frequency (RF) alternating current to dev An assembly of devices that uses radio-frequency (RF) alternating current to develop heat directly within soft-tissue cells (thermodynamic) for cutting and coagulating tissue within a shield of argon (Ar) gas during surgery. It typically includes a generator, a single-use/reusable electrode handpiece with monopolar electrodes, connecting cables, foot-switch, and an argon gas supply system [housed in a separate trolley (cart) or incorporated into the system generator]. The current forms an ionized channel or arc within the argon shield which lessens the charring of tissue and provides rapid, uniform coagulation over large bleeding surfaces (e.g., capillary beds). | KNS | Unit, Electrosurgical, Endoscopic (With Or Without Accessories) | 2 | Hobbs Medical TouchSoft Coagulator |
| 2 | M84965850 | 6585 | 6585 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 3 | M84965840 | 6584 | 6584 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 4 | M84965820 | 6582 | 6582 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 5 | M84965810 | 6581 | 6581 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 6 | M84965760 | 6576 | 6576 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 7 | M84965750 | 6575 | 6575 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 8 | M84965740 | 6574 | 6574 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 9 | M84965720 | 6572 | 6572 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 10 | M84965710 | 6571 | 6571 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 11 | M84965680 | 6568 | 6568 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 12 | M84965670 | 6567 | 6567 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 13 | M84965660 | 6566 | 6566 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 14 | M84965650 | 6565 | 6565 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 15 | M84965640 | 6564 | 6564 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 16 | M84965620 | 6562 | 6562 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 17 | M84965610 | 6561 | 6561 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 18 | M84965550 | 6555 | 6555 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 19 | M84965540 | 6554 | 6554 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 20 | M84965520 | 6552 | 6552 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 21 | M84965510 | 6551 | 6551 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 22 | M84965480 | 6548 | 6548 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 23 | M84965470 | 6547 | 6547 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 24 | M84965460 | 6546 | 6546 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 25 | M84965440 | 6544 | 6544 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 26 | M84965420 | 6542 | 6542 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 27 | M84965410 | 6541 | 6541 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 28 | M84965350 | 6535 | 6535 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 29 | M84965340 | 6534 | 6534 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 30 | M84965330 | 6533 | 6533 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 31 | M84965320 | 6532 | 6532 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 32 | M84963520 | 6352 | 6352 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 33 | M84963510 | 6351 | 6351 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 34 | M84963420 | 6342 | 6342 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 35 | M84963410 | 6341 | 6341 | A sterile non-bioabsorbable tubular device intended to be implanted in an obstru A sterile non-bioabsorbable tubular device intended to be implanted in an obstructed pancreatic duct (e.g., due to stricture or malignancy) to maintain luminal patency; it may also be intended to treat a wide variety of conditions in pancreatic endoscopy (e.g., drain pseudocyst, treat fistula or duct disruption). It is made entirely of a synthetic polymer and has a continuous tube design with or without retention flanges. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Freeman Pancreatic Flexi-Stent |
| 36 | M84961300 | 6130 | 6130 | The Guiding Catheter is a sterile device inserted through a compatible flexible The Guiding Catheter is a sterile device inserted through a compatible flexible endoscope to aid in the initial placement of a stent, typically into a pancreatic or biliary duct in order to maintain patency. It is made of polytetrafluoroethylene (PTFE) with a radiopaque marker on the distal end. This is a single-use device. | FGE | Catheter, Biliary, Diagnostic | 2 | Hobbs Guiding Catheter |
| 37 | M84960150 | 6015 | 6015 | Biliary Amsterdam Stent Kit includes Stent, Guide Wire, Push Catheter and Guide Catheter. | FGE | Catheter, Biliary, Diagnostic | 2 | Hobbs Biliary Amsterdam Stent Kit |
| 38 | M84960140 | 6014 | 6014 | Biliary Amsterdam Stent Kit includes Stent, Guide Wire, Push Catheter and Guide Catheter. | FGE | Catheter, Biliary, Diagnostic | 2 | Hobbs Biliary Amsterdam Stent Kit |
| 39 | M84960130 | 6013 | 6013 | Biliary Amsterdam Stent Kit includes Stent, Guide Wire, Push Catheter and Guide Catheter. | FGE | Catheter, Biliary, Diagnostic | 2 | Hobbs Biliary Amsterdam Stent Kit |
| 40 | M84960120 | 6012 | 6012 | Biliary Amsterdam Stent Kit includes Stent, Guide Wire, Push Catheter and Guide Catheter. | FGE | Catheter, Biliary, Diagnostic | 2 | Hobbs Biliary Amsterdam Stent Kit |
| 41 | M84960110 | 6011 | 6011 | Biliary Amsterdam Stent Kit includes Stent, Guide Wire, Push Catheter and Guide Catheter. | FGE | Catheter, Biliary, Diagnostic | 2 | Hobbs Biliary Amsterdam Stent Kit |
| 42 | M84960090 | 6009 | 6009 | Biliary Amsterdam Stent Kit includes Stent, Guide Wire, Push Catheter and Guide Catheter. | FGE | Catheter, Biliary, Diagnostic | 2 | Hobbs Biliary Amsterdam Stent Kit |
| 43 | M84960060 | 6006 | 6006 | Biliary Amsterdam Stent Kit includes Stent, Guide Wire, Push Catheter and Guide Catheter. | FGE | Catheter, Biliary, Diagnostic | 2 | Hobbs Biliary Amsterdam Stent Kit |
| 44 | M84960050 | 6005 | 6005 | Biliary Amsterdam Stent Kit includes Stent, Guide Wire, Push Catheter and Guide Catheter. | FGE | Catheter, Biliary, Diagnostic | 2 | Hobbs Biliary Amsterdam Stent Kit |
| 45 | M84933060 | 3306 | 3306 | A long flexible tube with an inflatable balloon at its distal tip used to dilate A long flexible tube with an inflatable balloon at its distal tip used to dilate gastrointestinal strictures of the lower esophageal schinctor. The balloon is inflated to its prescribed diameter to widen the affected passage of the tract. The device is multi-lumen and wire-guided. This is a single-use device. | KNQ | Dilator, Esophageal | 2 | Hobbs Achalasia Dilation Balloon |
| 46 | M84943520 | 4352 | 4352 | The Hobbs Microbiology Brush is intended to be used in combination with a compat The Hobbs Microbiology Brush is intended to be used in combination with a compatible flexible endoscope to collect cells of the mucosa for pathological diagnosis during endoscopy. It is inserted through the working channel of the endoscope and consists of a flexible insertion portion made of a metal coil inside a plastic tube, whose distal end is equipped with plastic bristles for harvesting and protecting mucosal cells, e.g., during endoscopy. This is a single-use device. | FDX | Endoscopic Cytology Brush | 2 | Hobbs Microbiology Brush |
| 47 | M84943200 | 4320 | 4320 | The Hobbs Microbiology Brush is intended to be used in combination with a compat The Hobbs Microbiology Brush is intended to be used in combination with a compatible flexible endoscope to collect cells of the mucosa for pathological diagnosis during endoscopy. It is inserted through the working channel of the endoscope and consists of a flexible insertion portion made of a metal coil inside a plastic tube, whose distal end is equipped with plastic bristles for harvesting and protecting mucosal cells, e.g., during endoscopy. This is a single-use device. | FDX | Endoscopic Cytology Brush | 2 | Hobbs Microbiology Brush |
| 48 | M84943100 | 4310 | 4310 | The Hobbs Microbiology Brush is intended to be used in combination with a compat The Hobbs Microbiology Brush is intended to be used in combination with a compatible flexible endoscope to collect cells of the mucosa for pathological diagnosis during endoscopy. It is inserted through the working channel of the endoscope and consists of a flexible insertion portion made of a metal coil inside a plastic tube, whose distal end is equipped with plastic bristles for harvesting and protecting mucosal cells, e.g., during endoscopy. This is a single-use device. | FDX | Endoscopic Cytology Brush | Hobbs Microbiology Brush | |
| 49 | M84933040 | 3304 | 3304 | A long flexible tube with an inflatable balloon at its distal tip used to dilate A long flexible tube with an inflatable balloon at its distal tip used to dilate gastrointestinal strictures of the lower esophageal schinctor. The balloon is inflated to its prescribed diameter to widen the affected passage of the tract. The device is multi-lumen and wire-guided. This is a single-use device. | KNQ | Dilator, Esophageal | 2 | Hobbs Achalasia Dilation Balloon |
| 50 | M84933020 | 3302 | 3302 | A long flexible tube with an inflatable balloon at its distal tip used to dilate A long flexible tube with an inflatable balloon at its distal tip used to dilate gastrointestinal strictures of the lower esophageal schinctor. The balloon is inflated to its prescribed diameter to widen the affected passage of the tract. The device is multi-lumen and wire-guided. This is a single-use device. | KNQ | Dilator, Esophageal | 2 | Hobbs Achalasia Dilation Balloon |
| No | Primary DI | Version or Model | Catalog Number | Device Description | Brand Name | Organization Name |
|---|---|---|---|---|---|---|
| 1 | 08809233102114 | BD1012 | BD1012 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 2 | 08809233102091 | BD1010 | BD1010 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 3 | 08809233102084 | BD1009 | BD1009 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 4 | 08809233102077 | BD1008 | BD1008 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 5 | 08809233102060 | BD1007 | BD1007 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 6 | 08809233102053 | BD1006 | BD1006 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 7 | 08809233102046 | BD1005 | BD1005 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 8 | 08809233102039 | BD1004 | BD1004 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 9 | 08809233102008 | BD0812 | BD0812 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 10 | 08809233101988 | BD0810 | BD0810 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 11 | 08809233101971 | BD0809 | BD0809 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 12 | 08809233101964 | BD0808 | BD0808 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 13 | 08809233101957 | BD0807 | BD0807 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 14 | 08809233101940 | BD0806 | BD0806 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 15 | 08809233101933 | BD0805 | BD0805 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 16 | 08809233101926 | BD0804 | BD0804 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 17 | 08809233100615 | TD1012 | TD1012 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 18 | 08809233100592 | TD1010 | TD1010 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 19 | 08809233100585 | TD1009 | TD1009 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 20 | 08809233100578 | TD1008 | TD1008 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 21 | 08809233100561 | TD1007 | TD1007 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 22 | 08809233100554 | TD1006 | TD1006 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 23 | 08809233100547 | TD1005 | TD1005 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 24 | 08809233100530 | TD1004 | TD1004 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 25 | 08809233100509 | TD0812 | TD0812 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 26 | 08809233100486 | TD0810 | TD0810 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 27 | 08809233100479 | TD0809 | TD0809 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 28 | 08809233100462 | TD0808 | TD0808 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 29 | 08809233100455 | TD0807 | TD0807 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 30 | 08809233100448 | TD0806 | TD0806 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 31 | 08809233100431 | TD0805 | TD0805 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 32 | 08809233100424 | TD0804 | TD0804 | The Niti-S Biliary Stent is indicated for the palliation of malignant strictures The Niti-S Biliary Stent is indicated for the palliation of malignant strictures in the biliary tree.The Niti-S Biliary Stent consists of an implantable metallic stent and a disposable, flexible introducer system for placement of the stent. The stent is a flexible and expandable tubular device made of Nitinol wire that is intended to be implanted to restore the structure and/or function of the biliary system. The introducer is a disposable system for delivery and deployment of the stent at the target position. Upon deployment, the stent imparts an outward radial force on the luminal surface of the biliary system to establish and maintain patency. The stent is available in two diameters (8, 10mm), and eight lengths (40, 50, 60, 70, 80, 90, 100, 120mm). The stent has 10 radiopaque markers.There are two different types of introducers; percutaneous or endoscopic. They consists of an Inner Catheter, Outer Sheath, Hub, Y-connector, Tip and Pusher. All of the components of the introducers are supplied sterile in a disposable package. The Percutaneous type introducer is used when the site is accessed percutaneously and requires a guidewire (not included) to be advanced across the targeted stricture under fluoroscopy. The Endoscopic type introducer is for use in endoscopic procedures where the stent and introducer are inserted through the channel of an endoscope. The usable lengths of Percutaneous type introducer is 50cm and Endoscopic type introducer 180cm. Other information: The package is sterilized using Ethylene oxide. The diameter of compatible guide wire is 0.035 inch (0.89mm). Do not use if package is damaged. Do not reuse or resterilize. | Niti-S Biliary Stent | TAEWOONGMEDICAL.CO.,LTD |
| 33 | 08806369461528 | BB-101018 | BONASTENT® Biliary | SEWOON MEDICAL CO., LTD. | ||
| 34 | 08806369461504 | BB-100918 | BONASTENT® Biliary | SEWOON MEDICAL CO., LTD. | ||
| 35 | 08806369461481 | BB-100818 | BONASTENT® Biliary | SEWOON MEDICAL CO., LTD. | ||
| 36 | 08806369461467 | BB-100718 | BONASTENT® Biliary | SEWOON MEDICAL CO., LTD. | ||
| 37 | 08806369461443 | BB-100618 | BONASTENT® Biliary | SEWOON MEDICAL CO., LTD. | ||
| 38 | 08806369461429 | BB-100518 | BONASTENT® Biliary | SEWOON MEDICAL CO., LTD. | ||
| 39 | 08806369461245 | BB-081018 | BONASTENT® Biliary | SEWOON MEDICAL CO., LTD. | ||
| 40 | 08806369461221 | BB-080918 | BONASTENT® Biliary | SEWOON MEDICAL CO., LTD. | ||
| 41 | 08806369461207 | BB-080818 | BONASTENT® Biliary | SEWOON MEDICAL CO., LTD. | ||
| 42 | 08806369461184 | BB-080718 | BONASTENT® Biliary | SEWOON MEDICAL CO., LTD. | ||
| 43 | 08806369461160 | BB-080618 | BONASTENT® Biliary | SEWOON MEDICAL CO., LTD. | ||
| 44 | 08806369461146 | BB-080518 | BONASTENT® Biliary | SEWOON MEDICAL CO., LTD. | ||
| 45 | 08806367093080 | BNHS-08-120-180 | Un-covered self-expanding nitinol biliary stent | HANAROSTENT® Benefit™ Biliary (NNN) | M.I.TECH CO., LTD. | |
| 46 | 08806367093073 | BNHS-08-120-060 | Un-covered self-expanding nitinol biliary stent | HANAROSTENT® Benefit™ Biliary (NNN) | M.I.TECH CO., LTD. | |
| 47 | 08806367093066 | BNHS-08-110-180 | Un-covered self-expanding nitinol biliary stent | HANAROSTENT® Benefit™ Biliary (NNN) | M.I.TECH CO., LTD. | |
| 48 | 08806367093059 | BNHS-08-110-060 | Un-covered self-expanding nitinol biliary stent | HANAROSTENT® Benefit™ Biliary (NNN) | M.I.TECH CO., LTD. | |
| 49 | 08806367093042 | BNHS-08-100-180 | Un-covered self-expanding nitinol biliary stent | HANAROSTENT® Benefit™ Biliary (NNN) | M.I.TECH CO., LTD. | |
| 50 | 08806367093035 | BNHS-08-100-060 | Un-covered self-expanding nitinol biliary stent | HANAROSTENT® Benefit™ Biliary (NNN) | M.I.TECH CO., LTD. |