Serim® GUARDIAN™ RESIDUAL CHLORINE Test Strips indicate the concentration of chl
Serim® GUARDIAN™ RESIDUAL CHLORINE Test Strips indicate the concentration of chlorine bleach (sodium hypochlorite) remaining in the solution used to rinse dialysate lines following disinfection of hemodialysis equipment.
SERIM GUARDIAN HiSENSE ULTRA 0.1 Test Strips indicates low levels of total chlor
SERIM GUARDIAN HiSENSE ULTRA 0.1 Test Strips indicates low levels of total chlorine (chloramines/free chlorine) in feed water used to prepare dialysate. The test also indicates the concentration of residual chlorine (chlorine bleach) remaining in the water used to rinse dialysate lines following disinfection of hemodialysis equipment.
MSY
Strip, Test, Reagent, Residuals For Dialysate, Disinfectant
Serim® DISINTEK™ OPA Test Strips are chemical indicators for use in determining
Serim® DISINTEK™ OPA Test Strips are chemical indicators for use in determining whether the concentration of ortho-phthalaldehyde, the active ingredient in CIDEX® OPA Solution and MetriCide® OPA Plus™ Solution, is above or below the established minimum effective concentration (MEC) of 0.3%.
JOJ
Indicator, Physical/Chemical Sterilization Process
Serim® GUARDIAN™ Blood Leak Test Strips provide a rapid method to test dialysate
Serim® GUARDIAN™ Blood Leak Test Strips provide a rapid method to test dialysate for blood if a dialyzer membrane leak is suspected during thehemodialysis procedure.
Serim® GUARDIAN™ Residual Formaldehyde Test Strips measure the concentration of
Serim® GUARDIAN™ Residual Formaldehyde Test Strips measure the concentration of formaldehyde remaining after rinsing dialyzers or dialysate lines prior to use in hemodialysis.
LIF
Dialyzer Reprocessing System
Serim® GUARDIAN™ Residual Formaldehyde Test Strips
Serim® GUARDIAN™ Bicarb pH II Test Strips are designed to test bicarbonate conce
Serim® GUARDIAN™ Bicarb pH II Test Strips are designed to test bicarbonate concentrate and/or final dialysate solutions for the appropriate pH where bicarbonate and acid and water are mixed in closed systems.
Serim® GUARDIAN™ Residual Chlorine Test Strips indicating the concentration of c
Serim® GUARDIAN™ Residual Chlorine Test Strips indicating the concentration of chlorine bleach (sodium hypochlorite) remaining in the solution used to rinse dialysate lines following disinfection of hemodialysis equipment.
Serim PeriScreen Test Strips indicate the presence of leukocytes (white blood ce
Serim PeriScreen Test Strips indicate the presence of leukocytes (white blood cells) in peritoneal dialysate effluent.
The Serim® GUARDIAN™ HiSENSE™ Test Kit indicates low levels of total chlorine (c
The Serim® GUARDIAN™ HiSENSE™ Test Kit indicates low levels of total chlorine (chloramine and/or free chlorine) in water used to prepare dialysate.
Serim® GUARDIAN™ Residual Peroxide Test Strips measure the concentration of pero
Serim® GUARDIAN™ Residual Peroxide Test Strips measure the concentration of peroxide remaining in dialysate lines and dialyzers after disinfection with peracetic acid/peroxide-based disinfectants.
The Serim PyloriTek Test Kit detects urease activity in gastric biopsy specimens
The Serim PyloriTek Test Kit detects urease activity in gastric biopsy specimens for the presumptive identification of Helicobacter pylori.
The Serim PyloriTek Test Kit detects urease activity in gastric biopsy specimens
The Serim PyloriTek Test Kit detects urease activity in gastric biopsy specimens for the presumptive identification of Helicobacter pylori.
Serim DISINTEK GTA 1.5% Test Strips are used to determine whether the glutaralde
Serim DISINTEK GTA 1.5% Test Strips are used to determine whether the glutaraldehyde concentration is above or at/below the Minimum Effective Concentration (MEC) of 1.5% for CIDEX® or MetriCide® reusable glutaraldehyde high-level disinfectants.
Serim® GUARDIAN™ BICARB pH II Test Strips are designed to test bicarbonate conce
Serim® GUARDIAN™ BICARB pH II Test Strips are designed to test bicarbonate concentrate and/or final dialysate solutions for the appropriate pH where bicarbonate and acid and water are mixed in closed systems.
The Wavicide MEC Indicator is a semi-quantitative indicator designed to monitor
The Wavicide MEC Indicator is a semi-quantitative indicator designed to monitor the glutaraldehyde concentration of Wavicide-01.
A high level disinfectant concentration monitor dedicated for use with Preventio
A high level disinfectant concentration monitor dedicated for use with Prevention HLD8 High Level Disinfectant.
Serim® DISINTEK™ OPA Test Strips are chemical indicators for use in determining
Serim® DISINTEK™ OPA Test Strips are chemical indicators for use in determining whether the concentration of ortho-phthalaldehyde, the active ingredient in CIDEX® OPA Solution and MetriCide® OPA Plus™ Solution, is above or below the established minimum effective concentration (MEC) of 0.3%.
SERIM® GUARDIAN™ Peracetic Acid Test Strips indicate the concentration (potency
SERIM® GUARDIAN™ Peracetic Acid Test Strips indicate the concentration (potency) of peracetic acid in dialyzer reprocessing concentrates such as Renalin® Cold Sterilant, PerAldecide™, Puristeril® 340, Peracidin™ and Micro-X®.
Tyvek® Roll with CI for STERLINK™ Sterilizer is intended to be used to contain m
Tyvek® Roll with CI for STERLINK™ Sterilizer is intended to be used to contain medical devices to be terminally sterilized in the STERLINK™ sterilization system. The medical devices are inserted into the roll, sealed, and then sterilized in the STERLINK™ sterilization system. After completion of the sterilization process, the roll maintains sterility of the enclosed medical devices until the seal is opened. The device is intended to allow sterilization of enclosed devices and also to maintain sterility of the enclosed devices for up to 1 month post sterilization.
Cintape® CT40 Process Indicators (Type 1 according ISO 11140-1:2014 standard) ar
Cintape® CT40 Process Indicators (Type 1 according ISO 11140-1:2014 standard) are single-use chemical indicators that consist of a roll of self-adhesive plastic tape printed with indicator ink. These indicators have been designed to monitor Plasma or Vaporized Hydrogen Peroxide sterilization processes, ensuring an adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items.
Terragene Chemdye® (CD42) Process Indicators (Type 1 according ISO 11140-1:2014
Terragene Chemdye® (CD42) Process Indicators (Type 1 according ISO 11140-1:2014 standard) are single-use chemical indicators that consist of a roll of self-adhesive plastic tape printed with indicator ink. These indicators have been designed to monitor Plasma or Vaporized Hydrogen Peroxide sterilization processes, ensuring an adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items.
Terragene Bionova® SCBI(BT96) is a self-contained biological indicator inoculate
Terragene Bionova® SCBI(BT96) is a self-contained biological indicator inoculated with viable 10^6 Geobacillus sterotheromophilus bacterial spores and is intended for monitoring the efficacy of vaporized hydorgen peroxide sterilization processes. BT96 has Super Rapid readout at 30 minutes at 60 degree celsius.