geneX® is a simple to use synthetic resorbable material designed to promote rege
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. One component of the matrix prevents soft tissue in-growth until it is resorbed and replaced by new bony tissue. Another component has been shown to act as a scaffold through which new bone grows. The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form geneX®; a hard but resorbable matrix.
geneX® is a simple to use synthetic resorbable material designed to promote rege
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. One component of the matrix prevents soft tissue in-growth until it is resorbed and replaced by new bony tissue. Another component has been shown to act as a scaffold through which new bone grows. The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form geneX®; a hard but resorbable matrix.
geneX® is a simple to use synthetic resorbable material designed to promote rege
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. One component of the matrix prevents soft tissue in-growth until it is resorbed and replaced by new bony tissue. Another component has been shown to act as a scaffold through which new bone grows. The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe.When injected the mixture sets to form geneX®; a hard but resorbable matrix.
geneX® is a simple to use synthetic resorbable material designed to promote rege
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. One component of the matrix prevents soft tissue in-growth until it is resorbed and replaced by new bony tissue. Another component has been shown to act as a scaffold through which new bone grows. The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe.When injected the mixture sets to form geneX®; a hard but resorbable matrix.
The Bilok® ST Screw is a cannulated, sterile, single-use bone screw made of an a
The Bilok® ST Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok® ST Screw is for use as a fixation screw in cruciate ligament surgery. It provides a combination of suspension and compression fixation that resorbs and it is subsequently replaced with bone during the healing process. Bilok® ST Screw is biodegradable and biocompatible.
The Bilok® ST Screw is a cannulated, sterile, single-use bone screw made of an a
The Bilok® ST Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok® ST Screw is for use as a fixation screw in cruciate ligament surgery. It provides a combination of suspension and compression fixation that resorbs and it is subsequently replaced with bone during the healing process. Bilok® ST Screw is biodegradable and biocompatible.
geneX® is a simple to use synthetic resorbable material designed to promote rege
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. One component of the matrix prevents soft tissue in-growth until it is resorbed and replaced by new bony tissue. Another component has been shown to act as a scaffold through which new bone grows. The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe.When injected the mixture sets to form geneX®; a hard but resorbable matrix.
geneX® is a simple to use synthetic resorbable material designed to promote rege
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. One component of the matrix prevents soft tissue in-growth until it is resorbed and replaced by new bony tissue. Another component has been shown to act as a scaffold through which new bone grows. The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe.When injected the mixture sets to form geneX®; a hard but resorbable matrix.
The Bilok® ST Screw is a cannulated, sterile, single-use bone screw made of an a
The Bilok® ST Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok® ST Screw is for use as a fixation screw in cruciate ligament surgery. It provides a combination of suspension and compression fixation that resorbs and it is subsequently replaced with bone during the healing process. Bilok® ST Screw is biodegradable and biocompatible.
The Bilok® ST Screw is a cannulated, sterile, single-use bone screw made of an a
The Bilok® ST Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok® ST Screw is for use as a fixation screw in cruciate ligament surgery. It provides a combination of suspension and compression fixation that resorbs and it is subsequently replaced with bone during the healing process. Bilok® ST Screw is biodegradable and biocompatible.
geneX® is a simple to use synthetic resorbable material designed to promote rege
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form geneX® a hard but resorbable matrix. geneX® is supplied sterile
geneX® is a simple to use synthetic resorbable material designed to promote rege
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form geneX® a hard but resorbable matrix. geneX® is supplied sterile
Stimulan® Calcium Sulfate Bone Void Filler pellets are provided sterile for sing
Stimulan® Calcium Sulfate Bone Void Filler pellets are provided sterile for single patient use. The biodegradable, radiopaque pellets are resorbed in approximately 30-60 days when used in accordance with the device labelling. Calcium Sulfate Bone Filler is manufactured from medical grade calcium sulfate dihydrate (CaSO4 2H20) and stearic acid that resorbs and is replaced with bone during the healing process. Also as the bone void filler pellets are biodegradable and biocompatible, they may be used at an infected site.
geneX® is a simple to use synthetic resorbable material designed to promote rege
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form geneX® a hard but resorbable matrix. geneX® is supplied sterile
geneX® is a simple to use synthetic resorbable material designed to promote rege
geneX® is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form geneX® a hard but resorbable matrix. geneX® is supplied sterile
Stimulan® Calcium Sulfate Bone Void Filler pellets are provided sterile for sing
Stimulan® Calcium Sulfate Bone Void Filler pellets are provided sterile for single patient use. The biodegradable, radiopaque pellets are resorbed in approximately 30-60 days when used in accordance with the device labelling. Calcium Sulfate Bone Filler is manufactured from medical grade calcium sulfate dihydrate (CaSO4 2H20) and stearic acid that resorbs and is replaced with bone during the healing process. Also as the bone void filler pellets are biodegradable and biocompatible, they may be used at an infected site.
Genex® Bone Graft Substitute is a simple to use synthetic resorbable material de
Genex® Bone Graft Substitute is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form Genex® Bone Graft Substitute a hard but resorbable matrix. Genex® Bone Graft Substitute is supplied sterile.
Genex® Bone Graft Substitute is a simple to use synthetic resorbable material de
Genex® Bone Graft Substitute is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form Genex® Bone Graft Substiute, a hard but resorbable matrix. Genex® Bone Graft Substitute is supplied sterile.
The STIMULAN® Bullet Mat and Introducer is a surgical instrument whcih includes
The STIMULAN® Bullet Mat and Introducer is a surgical instrument whcih includes a mat for preparation of the STIMULAN® bullets, a 7mm introducer, a 9mm introducer and an obturator for hard to reach defects. To be used with 20cc Stimulan Rapid Cure
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cu
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cure contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to set insitu or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Rapid Cure is manufactured from synthetic implant grade calcium sulfate dihydrate(CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also, as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cu
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cure contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to set insitu or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Rapid Cure is manufactured from synthetic implant grade calcium sulfate dihydrate(CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also, as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cu
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cure contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to set insitu or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Rapid Cure is manufactured from synthetic implant grade calcium sulfate dihydrate(CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also, as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
Genex® Bone Graft Substitute is a simple to use synthetic resorbable material de
Genex® Bone Graft Substitute is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form Genex® Bone Graft Substiute, a hard but resorbable matrix. Genex® Bone Graft Substitute is supplied sterile.
geneX® putty consists of an inorganic framework of calcium based ions. geneX® Pu
geneX® putty consists of an inorganic framework of calcium based ions. geneX® Putty has been bioengineered to mimic human bone. It is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. geneX® Putty is a non-setting putty and is supplied sterile.
The STIMULAN® Bullet Mat and Introducer is a surgical instrument whcih includes
The STIMULAN® Bullet Mat and Introducer is a surgical instrument whcih includes a mat for preparation of the STIMULAN® bullets, a 7mm introducer, a 9mm introducer and an obturator for hard to reach defects. To be used with 20cc Stimulan Rapid Cure
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cu
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cure contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to set insitu or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Rapid Cure is manufactured from synthetic implant grade calcium sulfate dihydrate(CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also, as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
Genex® Bone Graft Substitute is a simple to use synthetic resorbable material de
Genex® Bone Graft Substitute is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible.The kit contains a powder and mixing solution which, when combined, provides a mouldable cohesive paste for introduction into a syringe. When injected the mixture sets to form Genex® Bone Graft Substitute a hard but resorbable matrix. Genex® Bone Graft Substitute is supplied sterile.
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cu
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cure contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to set insitu or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Rapid Cure is manufactured from synthetic implant grade calcium sulfate dihydrate(CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also, as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cu
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cure contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to set insitu or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Rapid Cure is manufactured from synthetic implant grade calcium sulfate dihydrate(CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also, as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cu
STIMULAN® Rapid Cure provided sterile for single patient use. STIMULAN® Rapid Cure contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be digitally packed into open bone void/gap to set insitu or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Rapid Cure is manufactured from synthetic implant grade calcium sulfate dihydrate(CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also, as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
geneX® putty consists of an inorganic framework of calcium based ions. geneX® Pu
geneX® putty consists of an inorganic framework of calcium based ions. geneX® Putty has been bioengineered to mimic human bone. It is a simple to use synthetic resorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. geneX® Putty is a non-setting putty and is supplied sterile.
genex® Bone Graft Substitute is a simple to use synthetic absorbable material de
genex® Bone Graft Substitute is a simple to use synthetic absorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. The kit contains a powder filled syringe and mixing solution which, when combined, provides a mouldablecohesive paste which may be implanted into open voids/gaps of the musculoskeletal system to set insitu or placed in the bead mould mat provided to form beads for implantation. When injected the mixturesets to form genex® Bone Graft substitute a hard but absorbable matrix. genex® Bone Graft Substituteis supplied sterile. genex® Bone Graft Substitute , accessories and packaging are not made from natural rubber latex.genex® Bone Graft Substitute is MR safe.
genex® Bone Graft Substitute is a simple to use synthetic absorbable material de
genex® Bone Graft Substitute is a simple to use synthetic absorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. The kit contains a powder filled syringe and mixing solution which, when combined, provides a mouldablecohesive paste which may be implanted into open voids/gaps of the musculoskeletal system to set insitu or placed in the bead mould mat provided to form beads for implantation. When injected the mixturesets to form genex® Bone Graft substitute a hard but absorbable matrix. genex® Bone Graft Substituteis supplied sterile. genex® Bone Graft Substitute , accessories and packaging are not made from natural rubber latex.genex® Bone Graft Substitute is MR safe.
genex® Bone Graft Substitute is a simple to use synthetic absorbable material de
genex® Bone Graft Substitute is a simple to use synthetic absorbable material designed to promote regeneration of bone in osseous defects. It degrades into component elements normally found in the body and is highly biocompatible. The kit contains a powder filled syringe and mixing solution which, when combined, provides a mouldablecohesive paste which may be implanted into open voids/gaps of the musculoskeletal system to set in situ or placed in the bead mould mat provided to form beads for implantation. When injected the mixture sets to form genex® Bone Graft substitute a hard but absorbable matrix. genex® Bone Graft Substituteis supplied sterile. genex® Bone Graft Substitute , accessories and packaging are not made from natural rubber latex. genex® Bone Graft Substitute is MR safe.
STIMULAN® Kit - provided sterile for single patient use. STIMULAN® Kit contains
STIMULAN® Kit - provided sterile for single patient use. STIMULAN® Kit contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be injected or digitally packed into open bone void/gap to set in situ or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Kit is manufactured from synthetic implant grade calcium sulfate dihydrate (CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
STIMULAN® Kit - provided sterile for single patient use. STIMULAN® Kit contains
STIMULAN® Kit - provided sterile for single patient use. STIMULAN® Kit contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be injected or digitally packed into open bone void/gap to set in situ or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Kit is manufactured from synthetic implant grade calcium sulfate dihydrate (CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is provided sterile for
Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is provided sterile for single patient use. The biodegradable, radiopaque granules/blocks are resorbed in approximately 6-12 months when used in accordance with the device labelling. Biocomposites Tri-Calcium Phosphate Bone Graft Substitute is manufactured from medical grade Tri-Calcium Phosphate. Numerous bone graft operations are undertaken every year to repair bone defects caused by surgery, tumours, trauma, infections and other damage. Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is intended for use in clinical situations where the use of autologous grafts or other bone graft substitutes maybe undesirable, due either to the risk of associated infection or unavailability. Allogran-R® resorbs and is replaced with bone during the healing process.
Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is provided sterile for
Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is provided sterile for single patient use. The biodegradable, radiopaque granules/blocks are resorbed in approximately 6-12 months when used in accordance with the device labelling. Biocomposites Tri-Calcium Phosphate Bone Graft Substitute is manufactured from medical grade Tri-Calcium Phosphate. Numerous bone graft operations are undertaken every year to repair bone defects caused by surgery, tumours, trauma, infections and other damage. Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is intended for use in clinical situations where the use of autologous grafts or other bone graft substitutes maybe undesirable, due either to the risk of associated infection or unavailability. Allogran-R® resorbs and is replaced with bone during the healing process.
The Biosteon® IntraLine® 6.5mm HA/PLLA Suture Anchor with three #2 Force Fibre®,
The Biosteon® IntraLine® 6.5mm HA/PLLA Suture Anchor with three #2 Force Fibre®, is a single use device. It is made from a resorbable composite which will gradually be resorbed into the body. This function however is patient dependent. The device is supplied sterile. The device is intended to secure a suture or sutures to bone that are then used to reattach damaged soft tissue in orthopaedic procedures in the shoulder, foot/ankle, knee, hand/wrist, elbow and pelvis. The device is supplied with polyethylene sutures.
The Biosteon® IntraLine® 6.5mm HA/PLLA Needled Suture Anchor with two #2 Force F
The Biosteon® IntraLine® 6.5mm HA/PLLA Needled Suture Anchor with two #2 Force Fibre®, is a single use device. It is made from a resorbable composite which will gradually be resorbed into the body. This function however is patient dependent. The device is supplied sterile. The device is intended to secure a suture or sutures to bone that are then used to reattach damaged soft tissue in orthopaedic procedures in the shoulder, foot/ankle, knee, hand/wrist, elbow and pelvis. The device is supplied with stainless steel needles and polyethylene sutures.
The Biosteon® IntraLine® 6.5mm HA/PLLA Suture Anchor with two #2 Force Fibre®, i
The Biosteon® IntraLine® 6.5mm HA/PLLA Suture Anchor with two #2 Force Fibre®, is a single use device. It is made from a resorbable composite which will gradually be resorbed into the body. This function however is patient dependent. The device is supplied sterile. The device is intended to secure a suture or sutures to bone that are then used to reattach damaged soft tissue in orthopaedic procedures in the shoulder, foot/ankle, knee, hand/wrist, elbow and pelvis. The device is supplied with polyethylene sutures.
The Biosteon® IntraLine® 5.5mm HA/PLLA Suture Anchor with three #2 Force Fibre®,
The Biosteon® IntraLine® 5.5mm HA/PLLA Suture Anchor with three #2 Force Fibre®, is a single use device. It is made from a resorbable composite which will gradually be resorbed into the body. This function however is patient dependent. The device is supplied sterile. The device is intended to secure a suture or sutures to bone that are then used to reattach damaged soft tissue in orthopaedic procedures in the shoulder, foot/ankle, knee, hand/wrist, elbow and pelvis. The device is supplied with polyethylene sutures.
The Biosteon® IntraLine® 5.5mm HA/PLLA Needled Suture Anchor with two #2 Force F
The Biosteon® IntraLine® 5.5mm HA/PLLA Needled Suture Anchor with two #2 Force Fibre®, is a single use device. It is made from a resorbable composite which will gradually be resorbed into the body. This function however is patient dependent. The device is supplied sterile. The device is intended to secure a suture or sutures to bone that are then used to reattach damaged soft tissue in orthopaedic procedures in the shoulder, foot/ankle, knee, hand/wrist, elbow and pelvis. The device is supplied with stainless steel needles and polyethylene sutures.
The Biosteon® IntraLine® 5.5mm HA/PLLA Suture Anchor with two #2 Force Fibre®, i
The Biosteon® IntraLine® 5.5mm HA/PLLA Suture Anchor with two #2 Force Fibre®, is a single use device. It is made from a resorbable composite which will gradually be resorbed into the body. This function however is patient dependent. The device is supplied sterile. The device is intended to secure a suture or sutures to bone that are then used to reattach damaged soft tissue in orthopaedic procedures in the shoulder, foot/ankle, knee, hand/wrist, elbow and pelvis. The device is supplied with polyethylene sutures.
STIMULAN® Kit - provided sterile for single patient use. STIMULAN® Kit contains
STIMULAN® Kit - provided sterile for single patient use. STIMULAN® Kit contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be injected or digitally packed into open bone void/gap to set in situ or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Kit is manufactured from synthetic implant grade calcium sulfate dihydrate (CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
STIMULAN® Kit - provided sterile for single patient use. STIMULAN® Kit contains
STIMULAN® Kit - provided sterile for single patient use. STIMULAN® Kit contains calcium sulfate powder and mixing solution in pre-measured quantities so that when mixed together in a sterile mixing bowl, the resultant paste is to be injected or digitally packed into open bone void/gap to set in situ or placed into the mould provided, the mixture sets to form beads. The biodegradable, radiopaque beads are resorbed in approximately 30 – 60 days when used in accordance with the device labelling. STIMULAN® Kit is manufactured from synthetic implant grade calcium sulfate dihydrate (CaSO4.2H2O) that resorbs and is replaced with bone during the healing process. Also as the bone void filler beads are biodegradable and biocompatible, they may be used at an infected site.
Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is provided sterile for
Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is provided sterile for single patient use. The biodegradable, radiopaque granules/blocks are resorbed in approximately 6-12 months when used in accordance with the device labelling. Biocomposites Tri-Calcium Phosphate Bone Graft Substitute is manufactured from medical grade Tri-Calcium Phosphate. Numerous bone graft operations are undertaken every year to repair bone defects caused by surgery, tumours, trauma, infections and other damage. Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is intended for use in clinical situations where the use of autologous grafts or other bone graft substitutes maybe undesirable, due either to the risk of associated infection or unavailability. Allogran-R® resorbs and is replaced with bone during the healing process.
Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is provided sterile for
Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is provided sterile for single patient use. The biodegradable, radiopaque granules/blocks are resorbed in approximately 6-12 months when used in accordance with the device labelling. Biocomposites Tri-Calcium Phosphate Bone Graft Substitute is manufactured from medical grade Tri-Calcium Phosphate. Numerous bone graft operations are undertaken every year to repair bone defects caused by surgery, tumours, trauma, infections and other damage. Allogran-R® Tri-Calcium Phosphate Bone Graft Substitute is intended for use in clinical situations where the use of autologous grafts or other bone graft substitutes maybe undesirable, due either to the risk of associated infection or unavailability. Allogran-R® resorbs and is replaced with bone during the healing process.
The Bilok® Tapered Screw is a cannulated, sterile, single-use bone screw made of
The Bilok® Tapered Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok° Screw provides an interference fixation during femoral and/or tibial fixation in ACL reconstruction that resorbs and is replaced with bone during the healing process. Bilok® Screws are biodegradable and biocompatible and should not be used at an infected site.
The Bilok® Tapered Screw is a cannulated, sterile, single-use bone screw made of
The Bilok® Tapered Screw is a cannulated, sterile, single-use bone screw made of an absorbable Poly (L-lactic) acid and calcium phosphate which will gradually be absorbed into the body over a period of 24 months. This function however is patient dependant. The Bilok° Screw provides an interference fixation during femoral and/or tibial fixation in ACL reconstruction that resorbs and is replaced with bone during the healing process. Bilok® Screws are biodegradable and biocompatible.