Indicated for use during open and laparoscopic cholecystectomy procedures to inj
Indicated for use during open and laparoscopic cholecystectomy procedures to inject radiopaque media through the cystic duct into the biliary tree.
The EASYGRIP FLO-41 Precision MIS Delivery System (EASYGRIP FLO-41 System) is a
The EASYGRIP FLO-41 Precision MIS Delivery System (EASYGRIP FLO-41 System) is a sterile, single-use device that consists of two components: (1) one applicator device with a 41 cm long cannula (5 mm outer diameter) and (2) one empty 1.5 mL syringe.
The Guardenia contained extraction system is indicated to contain and isolate ti
The Guardenia contained extraction system is indicated to contain and isolate tissue during, or prior to, surgical removal and/or extracorporeal manual morcellation.A system for the containment of tissue for reduction, with a scalpel (or similar instrument), and extraction.The device will retract the incision & contain the tissue being extracted. The device will provide protection of the containment component from inadvertent damage from sharp instruments used in the reduction process.
This device is intended for use as an endoscopic instrument(s) and/or camera por
This device is intended for use as an endoscopic instrument(s) and/or camera port during minimally invasive abdominal surgery.The ASC TriPort+ is a sterile, disposable endoscopic multi-instrument port. The device consists of the following:• An Introducer that allows the insertion of the Base Retractor into the abdomen through an incision.• A Base Retractor that retracts in an abdominal incision to allow laparoscopic instruments pass through to the abdomen. • A Boot contains four instrument valves and two ports that allow insufflation of the abdomen or venting of electrocautery gases. The Boot maintains pneumoperitoneum when attached and allows specimen removal when detached.
DEPTH GAUGE INNER BODY WITH BALL & SPRING. THIS INNER TUBE HAS MARKINGS ON IT. I
DEPTH GAUGE INNER BODY WITH BALL & SPRING. THIS INNER TUBE HAS MARKINGS ON IT. IT SITS INSIDE THE "DEPTH GAUGE OUTER BODY TUBE - RM06008 (DI NO# 05060433906)". THIS CREATES THE FINAL INSTRUMENT IN626/1 - "DEPTH GAUGE ASSEMBLY - AS01069"
DEPTH GAUGE OUTER BODY TUBE. THIS TUBE HOUSES THE "DEPTH GAUGE INNER BODY WITH
DEPTH GAUGE OUTER BODY TUBE. THIS TUBE HOUSES THE "DEPTH GAUGE INNER BODY WITH BALL & SPRING - RM06009 (DI NO# 05060433600913)" AND HAS A CAP THAT FITS ONTO THE END OF IT CALLED "DEPTH GAUGE OUTER BODY CAP - RM06010 (05060433600890)". THIS CREATES THE FINAL INSTRUMENT IN626/1 - "DEPTH GAUGE ASSEMBLY - AS01069"
DEPTH GAUGE OUTER BODY CAP. THIS CAP SCREWS ONTO "DEPTH GAUGE OUTER BODY TUBE -
DEPTH GAUGE OUTER BODY CAP. THIS CAP SCREWS ONTO "DEPTH GAUGE OUTER BODY TUBE - RM06008 (DI NO# 05060433600906)" AND ENCLOSES "DEPTH GAUGE INNER BODY WITH BALL & SPRING - RM06009 (DI NO# 05060433600913)". THIS CREATES THE FINAL INSTRUMENT IN626/1 - "DEPTH GAUGE ASSEMBLY- AS01069 "
AO SCREWDRIVER SPINNER (THIS PART FITS ONTO THE BOTTOM END OF "AO CANULATED SILI
AO SCREWDRIVER SPINNER (THIS PART FITS ONTO THE BOTTOM END OF "AO CANULATED SILICONE SCREWDRIVER HANDLE WITH QUICK COUPLING, RM06006 - PRIMARY DI NO# (0506433600876)". THIS INSTRUMENT PART ALONG WITH "AO CANULATED SILICONE SCREWDRIVER HANDLE WITH QUICK COUPLING" MAKEUP INSTRUMENT IN630/1 - "AO CANNULATED HANDLE WITH QUICK COUPLING AND SPINNER - AS01068"
AO CANNULATED SILICONE SCREWDRIVER HANDLE WITH QUICK COUPLING. THE "AO SCREWDRIV
AO CANNULATED SILICONE SCREWDRIVER HANDLE WITH QUICK COUPLING. THE "AO SCREWDRIVER SPINNER" - DI NO# (05060433600883) SCREWS ONTO THE END OF THIS DEVICE. THIS CREATES THE FINAL INSTRUMENT IN630/1 - "AO CANNULATED HANDLE WITH QUICK COUPLING AND SPINNER - AS01068"
DRILL SLEEVE Ø2.5mm & TAP SLEEVE Ø3.5mm. THE FINISHED PART NUMBER IS IN631/1 - "
DRILL SLEEVE Ø2.5mm & TAP SLEEVE Ø3.5mm. THE FINISHED PART NUMBER IS IN631/1 - "DRILL SLEEVE Ø2.5mm & TAP SLEEVE Ø3.5mm - RM04053"
AO SCREWDRIVER SHAFT Ø2.5MM (HEX). THE FINISHED PART NUMBER IS IN629/1 - "AO SCR
AO SCREWDRIVER SHAFT Ø2.5MM (HEX). THE FINISHED PART NUMBER IS IN629/1 - "AO SCREWDRIVER SHAFT Ø2.5MM (HEX) - RM04051"