Cadence Tibial Impactor Adapter is screwed into the Tibial Impactor Handle and i
Cadence Tibial Impactor Adapter is screwed into the Tibial Impactor Handle and is used to seat the Tibial Tray on the distal tibia when the foot cannot be plantar flexed
Corner Osteotome is used to complete the medial resection of the tibia by cuttin
Corner Osteotome is used to complete the medial resection of the tibia by cutting the bone remaining between the previously drilled holes.
Cadence Tibial Implant Sizer is used to measure the anterior/posterior length of
Cadence Tibial Implant Sizer is used to measure the anterior/posterior length of the distal tibia.
Cadence Gap Sizer is used to verify the initial distal/ proximal location of the
Cadence Gap Sizer is used to verify the initial distal/ proximal location of the Distal Tibial Alignment block by aligning against the anterior lip of the distal tibia.
Cadence Post Drill is placed down through the holes in the Talar Chamfer DrillGu
Cadence Post Drill is placed down through the holes in the Talar Chamfer DrillGuide and used to drill a talar implant post hole into the talus.
Cadence Talar Reamer is placed down through the holes in the Talar Chamfer Reame
Cadence Talar Reamer is placed down through the holes in the Talar Chamfer Reamer Guide and ream the anterior surface of the talus.
Cadence Talar Chamfer Reamer Guide used to guide the ream and gauge the depth o
Cadence Talar Chamfer Reamer Guide used to guide the ream and gauge the depth of the Talar Chamfer Reamer.
Cadence Talar Chamfer Drill Guide is placed in the Talar Chamfer Cut Guide to
Cadence Talar Chamfer Drill Guide is placed in the Talar Chamfer Cut Guide to guide and drill a talar implant post hole into the talus.
Sagittal Rod is a part of the Tibial Alignment guide, and is connected to the Sa
Sagittal Rod is a part of the Tibial Alignment guide, and is connected to the Sagittal Connector to provide parallel alignment to the tibia in the sagittal plane.
Sagittal Connector is a part of the Tibial Alignment guide, and connects the Sag
Sagittal Connector is a part of the Tibial Alignment guide, and connects the Saggital Rod with the Tibial Rod to allow for proper positioning of the Tibial Rod
Straight Bone Pin - Trocar Tip is inserted into the Talar Cut Guide and used for
Straight Bone Pin - Trocar Tip is inserted into the Talar Cut Guide and used for stability and to protect the malleoli while performing the intial talar resection.
Straight Bone Pin - Drill Tip is used by being placed into the bone pin holes to
Straight Bone Pin - Drill Tip is used by being placed into the bone pin holes to hold the location and mark the medial resection line of the distal tibia by drilling bicortically through each of the three medial distal holes on the Tibial Cut Guide
U-Joint is used to remove the Tibial Tray from the talus when the Slap Hammer is
U-Joint is used to remove the Tibial Tray from the talus when the Slap Hammer is not sufficient.
Cadence Tibial Impactor Handle is attached to the Tibial Impactor Tip which is u
Cadence Tibial Impactor Handle is attached to the Tibial Impactor Tip which is used in the insertion of the Tibial Tray.
Cadence Tibial Impactor Stop is uses to prevent excesssive impaction of the Tibi
Cadence Tibial Impactor Stop is uses to prevent excesssive impaction of the Tibial Tray. The stop ensures that the implant is impacted only until the stop tabs contact the anterior tibia.
Cadence Tibial Impactor Tip is attached to the tibial impactor handle and is use
Cadence Tibial Impactor Tip is attached to the tibial impactor handle and is used to seat the Tibial Tray Implant on the distal tibia.
The Lamina Spreader is used to extend the Talar Cut Guide to tighten ligaments d
The Lamina Spreader is used to extend the Talar Cut Guide to tighten ligaments during preperation for talar resectioning procedure.
Cadence Talar Implant Extractor is used to remove the Talar Dome implant from th
Cadence Talar Implant Extractor is used to remove the Talar Dome implant from the implant site.
Cadence Talar Cut Guide is used in making a precise cut of the Talus bone during
Cadence Talar Cut Guide is used in making a precise cut of the Talus bone during resectioning.
Cadence Talar Cut Guide is used in making a precise cut of the Talus bone during
Cadence Talar Cut Guide is used in making a precise cut of the Talus bone during resectioning.
Cadence Tibial Cut Guide is used to provide precise cutting of the tibia bone an
Cadence Tibial Cut Guide is used to provide precise cutting of the tibia bone and can be used to provide an initial assessment of the correct tibial implant size to be used.
Cadence Tibial Cut Guide is used to provide precise cutting of the tibia bone an
Cadence Tibial Cut Guide is used to provide precise cutting of the tibia bone and can be used to provide an initial assessment of the correct tibial implant size to be used.
Cadence Talar Chamfer Cut Guide is secured on the talus bone to house the Talar
Cadence Talar Chamfer Cut Guide is secured on the talus bone to house the Talar Chamfer Reamer Guide for precise depth of holes drilled.
Cadence Flex Shaft Drill is placed through the hole in the tibial trial to drill
Cadence Flex Shaft Drill is placed through the hole in the tibial trial to drill a post hole into the tibia for placement of the implant.
Cadence Tibial Resection Template is lined up with specific targets on the Tibia
Cadence Tibial Resection Template is lined up with specific targets on the Tibial Cut Guide to ensure precise cuts to the tibia during the resectioning procedure.
Cadence Talar Sizer Holder is used to hold the Talar Sizer that is used to measu
Cadence Talar Sizer Holder is used to hold the Talar Sizer that is used to measure the proper size Talar Dome Trial.
Cadence Insert Inserter is used to properly insert and position the insert impla
Cadence Insert Inserter is used to properly insert and position the insert implant on the anterior face of the Tibial Tray implant.
Proximal Translation Block is a part of the Tibial Alignment guide, and is used
Proximal Translation Block is a part of the Tibial Alignment guide, and is used to connect the Proximal Tibial Clamp with the tibial rod for proper positioning to the center of the patients distal tibial metaphysis.