The EX2 Interface Unit is used to connect the M400 Myo-EX (GX1, GX2) and AngleX
The EX2 Interface Unit is used to connect the M400 Myo-EX (GX1, GX2) and AngleX (NC1, NC2) sensors to E3000 Serial Interface Upper Limb Exerciser.This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginnin
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginning from when there is the tiniest flicker of voluntary muscle activity, with or without visible joint movement.GX1 sensor with integral electrodes is applied to the skin with die-cut medical grade hypoallergenic tape.This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting.Hand (fingers and thumb) – active and passive, extension and flexion, abduction and adduction, lateral deviations and rotational deformities, calculation of total active motion and total passive motionWrist – active and passive, extension and flexion, radial and ulnar deviationThis product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
The unique electronic pinchmeter has a low profile design that enables the resea
The unique electronic pinchmeter has a low profile design that enables the researcher to accurately quantify pinch strength at closer to end range than any other device. This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
IKK,ISD,HCC
System, Isokinetic Testing And Evaluation,Exerciser, Measuring,Device, Biofeedback
The DataLOG is the latest in data acquisition technology developed to meet the n
The DataLOG is the latest in data acquisition technology developed to meet the needs of researchers for portable data collection and monitoring in human performance, sports science, medical research, industrial ergonomics, gait laboratories, and educational settings. Includes: 8 channel data acquisition unit, Bluetooth adapter, 6 x Micro SD cards, Card reader, Management Software, instrument caseThis product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
IKK,KQX
System, Isokinetic Testing And Evaluation,Goniometer, Ac-Powered
The DataLITE AD2 Adaptor is used with the DataLITE DG2 Dongle to readily interfa
The DataLITE AD2 Adaptor is used with the DataLITE DG2 Dongle to readily interface the following devices: Dynamometer, MyoMeter, Pinchmeter, ForcePlates and Load Cells.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
The DataLOG is the latest in data acquisition technology developed to meet the n
The DataLOG is the latest in data acquisition technology developed to meet the needs of researchers for portable data collection and monitoring in human performance, sports science, medical research, industrial ergonomics, gait laboratories, and educational settings. Includes: 8 channel data acquisition unit, Bluetooth adapter, 6 x Micro SD cards, Card reader, Management Software, instrument caseThis product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
KQX,IKK
Goniometer, Ac-Powered,System, Isokinetic Testing And Evaluation
A small wireless Dongle (receiver) attached to the USB port of the host PC (Wind
A small wireless Dongle (receiver) attached to the USB port of the host PC (Windows 8 or 10 compatible) can communicate with up to 24 channels of DataLITE sensor inputs via Wi-Fi. When used with a Windows 10 Tablet, the researcher can monitor and analyse data in real-time while the subject has total freedom of movement in laboratory or field studies.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
KQX,HCC,IKK
Goniometer, Ac-Powered,Device, Biofeedback,System, Isokinetic Testing And Evaluation
The SX230-100 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K80
The SX230-100 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K800 as well as to third party instruments.Biometrics Ltd precision bipolar, differential EMG sensors have integral electrodes with a fixed electrode distance of 20mm.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013SX230-100 EMG Sensor (Gain 100, Bandwidth 20-460Hz) - Plastic connector
The unique electronic pinchmeter has a low profile design that enables the resea
The unique electronic pinchmeter has a low profile design that enables the researcher to accurately quantify pinch strength at closer to end range than any other device. This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013.
HCC,ISD,IKK
Device, Biofeedback,Exerciser, Measuring,System, Isokinetic Testing And Evaluation
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and associated sensor analysis including real-time data analysis as the data is collected. The Analysis software also contains all of the features of the Management Software: The DataLOG Management Software allows the user to set up the DataLOG communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming dataSoftware is available in English, Chinese, and Japanese.
KQX,IKK
Goniometer, Ac-Powered,System, Isokinetic Testing And Evaluation
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginnin
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginning from when there is the tiniest flicker of voluntary muscle activity, with or without visible joint movement.GX5 sensor with integral electrodes is applied to the skin with die-cut medical grade hypoallergenic tape.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
The AD1 wireless Adaptor which can be used with various E-LINK devices – Dynamom
The AD1 wireless Adaptor which can be used with various E-LINK devices – Dynamometer, Pinchmeter, Goniometers, ForcePlate and the Upper Limb Exerciser.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
The MyoMeter allows the user to quantify the force applied during Manual Muscle
The MyoMeter allows the user to quantify the force applied during Manual Muscle Testing.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
IKK,ISD
System, Isokinetic Testing And Evaluation,Exerciser, Measuring
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginnin
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginning from when there is the tiniest flicker of voluntary muscle activity, with or without visible joint movement.GX2 sensor is used with disposable/reusable electrodes and applied where there is need to cover a larger surface area, for example on the quad muscles..This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
The Biometrics Dynamometer utilises precision load cell technology to increase t
The Biometrics Dynamometer utilises precision load cell technology to increase the sensitivity and accuracy of measurement of even very low grip strength forces. This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
ISD,HCC,IKK
Exerciser, Measuring,Device, Biofeedback,System, Isokinetic Testing And Evaluation
A modern microprocessor controlled general purpose amplifier system which is des
A modern microprocessor controlled general purpose amplifier system which is designed to be worn by the subject. The Amplifier (K800) provides a user friendly method for collecting signals from a variety of sensors including goniometers, sEMG and related signals, in a format which may readily be connected to proprietary display and recording systems including A/D cards.This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
IKK,KQX
System, Isokinetic Testing And Evaluation,Goniometer, Ac-Powered
The DataLOG Management Software allows the user to set up the DataLOG communicat
The DataLOG Management Software allows the user to set up the DataLOG communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming data to third party software.Software is available in English, Chinese, and Japanese.
IKK,KQX
System, Isokinetic Testing And Evaluation,Goniometer, Ac-Powered
Mains powered battery charging unit for up to 8 wireless DataLITE sensors (LE230
Mains powered battery charging unit for up to 8 wireless DataLITE sensors (LE230, W series Goniometers, Z series Torsiometers, AD2, ACL500).Includes Medical Grade Power Supply and country specific mains power cord..This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
IKK,HCC,KQX
System, Isokinetic Testing And Evaluation,Device, Biofeedback,Goniometer, Ac-Powered
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and associated sensor analysis including real-time data analysis as the data is collected. The Analysis software also contains all of the features of the Management Software: The DataLITE Management Software allows the user to set up the DataLITE communications with the computer, configure the DataLITE sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming dataSoftware is available in English, Chinese, and Japanese.
HCC,IKK,KQX
Device, Biofeedback,System, Isokinetic Testing And Evaluation,Goniometer, Ac-Powered
The Biometrics Dynamometer utilises precision load cell technology to increase t
The Biometrics Dynamometer utilises precision load cell technology to increase the sensitivity and accuracy of measurement of even very low grip strength forces. This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
IKK,HCC,ISD
System, Isokinetic Testing And Evaluation,Device, Biofeedback,Exerciser, Measuring
The DataLITE Management Software allows the user to set up the DataLITE communic
The DataLITE Management Software allows the user to set up the DataLITE communications with the computer, configure the DataLITE sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming data to third party software.Software is available in English, Chinese, and Japanese.
KQX,IKK,HCC
Goniometer, Ac-Powered,System, Isokinetic Testing And Evaluation,Device, Biofeedback
The X4 InterX Unit functions as the intelligent interface to connect the E-LINK
The X4 InterX Unit functions as the intelligent interface to connect the E-LINK evaluation and exercise modules to the computer via the USB port. Up to four E-LINK devices may be connected simultaneously allowing the user to easily and quickly switch between them during an evaluation or exercise session.Includes Medical Grade Power Supply and country specific mains power cord. This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
The wireless Dongle (DG1) enables E-LINK to be used as a complete stand-alone wi
The wireless Dongle (DG1) enables E-LINK to be used as a complete stand-alone wireless evaluation and exercise system.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
The E-LINK Hand Kit which includes a Dynamometer and Pinchmeter for monitoring g
The E-LINK Hand Kit which includes a Dynamometer and Pinchmeter for monitoring grip and pinch strength, is the ideal module to quantify and monitor the effectiveness of various interventions for the upper extremity, throughout the whole rehabilitation process.The Hand Kit can also be used with the E-LINK Activities (Games), for innovative isometric grip and pinch exercises that are totally focused on the individual patient.The Hand Kit (H500) is available with either a wireless or wired interface
The X4 InterX Unit functions as the intelligent interface to connect the E-LINK
The X4 InterX Unit functions as the intelligent interface to connect the E-LINK evaluation and exercise modules to the computer via the USB port. Up to four E-LINK devices may be connected simultaneously allowing the user to easily and quickly switch between them during an evaluation or exercise session.Includes Medical Grade Power Supply and country specific mains power cord. This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013.
DataLINK (DLK900) is an on-line general purpose subject worn programmable Data A
DataLINK (DLK900) is an on-line general purpose subject worn programmable Data Acquisition System allowing the user to collect both analog and digital data from a wide range of wired sensors including Biometrics' Goniometers, Torsiometers, active EMG sensors, Accelerometers, Pinchmeters, Hand Dynamometers and Contact Switches.This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13.
KQX,IKK
Goniometer, Ac-Powered,System, Isokinetic Testing And Evaluation
The DataLINK Management Software allows the user to set up the DataLINK communic
The DataLINK Management Software allows the user to set up the DataLINK communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming data to third party software.Software is available in English, Chinese, and Japanese.
KQX,IKK
Goniometer, Ac-Powered,System, Isokinetic Testing And Evaluation
DataLINK (DLK900) is an on-line general purpose subject worn programmable Data A
DataLINK (DLK900) is an on-line general purpose subject worn programmable Data Acquisition System allowing the user to collect both analog and digital data from a wide range of wired sensors including Biometrics' Goniometers, Torsiometers, active EMG sensors, Accelerometers, Pinchmeters, Hand Dynamometers and Contact Switches.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
IKK,KQX
System, Isokinetic Testing And Evaluation,Goniometer, Ac-Powered
E-LINK is a computerized modular system bringing both evaluation and exercise to
E-LINK is a computerized modular system bringing both evaluation and exercise together in an exciting format with an extensive scope of clinical applications for the upper and lower extremities.E-LINK is available in English, Chinese, German and Spanish.
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and associated sensor analysis including real-time data analysis as the data is collected. The Analysis software also contains all of the features of the Management Software: The DataLINK Management Software allows the user to set up the DataLINK communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming dataSoftware is available in English, Chinese, and Japanese.
IKK,KQX
System, Isokinetic Testing And Evaluation,Goniometer, Ac-Powered
The SX230FW EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K800
The SX230FW EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K800 as well as to third party instruments. The EMG Amplifier (SX230FW) uses disposable electrodes and has a variable electrode distance. This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13. SX230FW EMG Sensor (Gain 1000, Bandwidth 20-460Hz) - Metal connector
The SX230FW EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K800
The SX230FW EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K800 as well as to third party instruments. The EMG Amplifier (SX230FW) uses disposable electrodes and has a variable electrode distance. This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013SX230FW EMG Sensor (Gain 1000, Bandwidth 20-460Hz) - Plastic connector
Each ForcePlate consists of a sandwich of 2 uniform precision metal plates, with
Each ForcePlate consists of a sandwich of 2 uniform precision metal plates, with 4 load cells mounted between them. The vertical component of the total reaction force is measured independent of where it is applied over the surface of the plates.The relative light weight and small geometry of the plates aids in a wide range of upper and lower limb applications. The ForcePlates measure as little as the touch of a finger through to full standing weight bearing. This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013.
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting:Wrist, Forearm, Elbow, Shoulder, Hip, Knee, Ankle, Documentation of amputation, ankylosis, and arthrodesis for the above jointsThis product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
The SX230-1000 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K8
The SX230-1000 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K800 as well as to third party instruments.Biometrics Ltd precision bipolar, differential EMG sensors have integral electrodes with a fixed electrode distance of 20mm. This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13.SX230-1000 EMG Sensor (Gain 1000, Bandwidth 5-1000Hz) - Metal connector
The SX230-1000 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K8
The SX230-1000 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K800 as well as to third party instruments.Biometrics Ltd precision bipolar, differential EMG sensors have integral electrodes with a fixed electrode distance of 20mm..This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13. SX230-1000 EMG Sensor (Gain 1000, Bandwidth 5-480Hz) - Metal connector
The SX230-1000 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K8
The SX230-1000 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K800 as well as to third party instruments.Biometrics Ltd precision bipolar, differential EMG sensors have integral electrodes with a fixed electrode distance of 20mm. This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13SX230-1000 EMG Sensor (Gain 1000, Bandwidth 20-460Hz) - Metal connector
The SX230-1000 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K8
The SX230-1000 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K800 as well as to third party instruments.Biometrics Ltd precision bipolar, differential EMG sensors have integral electrodes with a fixed electrode distance of 20mm.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013SX230-1000 EMG Sensor (Gain 1000, Bandwidth 5-1000Hz) - Plastic connector
The SX230-1000 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K8
The SX230-1000 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K800 as well as to third party instruments.Biometrics Ltd precision bipolar, differential EMG sensors have integral electrodes with a fixed electrode distance of 20mm.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013SX230-1000 EMG Sensor (Gain 1000, Bandwidth 5-480Hz) - Plastic connector
The SX230-1000 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K8
The SX230-1000 EMG Sensors connect to the Biometrics Ltd DataLOG, DataLINK or K800 as well as to third party instruments.Biometrics Ltd precision bipolar, differential EMG sensors have integral electrodes with a fixed electrode distance of 20mm.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013SX230-1000 EMG Sensor (Gain 1000, Bandwidth 20-460Hz) - Plastic connector
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginnin
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginning from when there is the tiniest flicker of voluntary muscle activity, with or without visible joint movement.GX4 sensor is used with disposable/reusable electrodes and applied where there is need to cover a larger surface area, for example on the quad muscles..Metal connector for use with E-LINK X4 MkI or MkII Interface Unit with metal connectors.This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginnin
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginning from when there is the tiniest flicker of voluntary muscle activity, with or without visible joint movement.GX4 sensor is used with disposable/reusable electrodes and applied where there is need to cover a larger surface area, for example on the quad muscles..Plastic connector for use with E-LINK X4 MkIV Interface Unit with plastic connectors.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting.Hand (fingers and thumb) – active and passive, extension and flexion, abduction and adduction, lateral deviations and rotational deformities, calculation of total active motion and total passive motionWrist – active and passive, extension and flexion, radial and ulnar deviationThis product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
The DataLITE wireless surface EMG sensor gives superb quality of signal and ease
The DataLITE wireless surface EMG sensor gives superb quality of signal and ease of use. With a bandwidth of 5-495 Hz and a built in 1000 gain amplifier and wireless transmitter, surface EMG signals are collected and sent to the Biometrics software for analysis. EMG data can be synchronized real-time with other sensors as part of a complete DataLITE system.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
"The E-LINK Upper Limb Exerciser is designed for active and active resistive upp
"The E-LINK Upper Limb Exerciser is designed for active and active resistive upper extremity exercise of the wrist, forearm, elbow, and shoulder. The versatility of the parameters allows rehabilitation for a wide range of orthopedic and neurological patients.The Upper Limb Exerciser is available with either a wireless or wired interface to the computer."
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginnin
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginning from when there is the tiniest flicker of voluntary muscle activity, with or without visible joint movement.GX3 sensor with integral electrodes is applied to the skin with die-cut medical grade hypoallergenic tape.Metal connector for use with E-LINK X4 MkI or MkII Interface Unit with metal connectors.This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
Mains powered battery charging unit for up to 4 wireless E-LINK sensors (GX5, NC
Mains powered battery charging unit for up to 4 wireless E-LINK sensors (GX5, NC6, AD1). Includes Medical Grade Power Supply and country specific mains power cord..This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginnin
Highly sensitive Myo-EX sensors use surface EMG for inspiring exercise, beginning from when there is the tiniest flicker of voluntary muscle activity, with or without visible joint movement.GX3 sensor with integral electrodes is applied to the skin with die-cut medical grade hypoallergenic tape.Plastic connector for use with E-LINK X4 MkIV Interface Unit with plastic connectors.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting.The Biometrics Range of Motion Kit (R500) provides precise electronic tools for:upper and lower extremity range of motion measurements
The Myolab II was specifically designed for use in fitting and troubleshooting t
The Myolab II was specifically designed for use in fitting and troubleshooting the Utah Arm and ProPlus myoelectric prostheses. It can be used to locate muscle activity down to 0.2 microvolts in the remnant limb. The adjustable gain feature allows the device to test and train muscle EMG for any single or dual-channel myoelectric control system.
The eVox System is intended for the acquisition, display, and storage, of electr
The eVox System is intended for the acquisition, display, and storage, of electrical activityof a patient’s brain including electroencephalograph (EEG) and event-related potentials(ERP) obtained by placing two or more electrodes on the head to aid in diagnosisThe medical system includes the “eVox System” amplifier device, accessories, and acomputer (laptop computer or tablet device with internal battery and power cord).The hardware and ancillary components used in conjunction with the eVox System includean EEG cap, the eVox Amplifier, a charging kit (that consists of a USB cable, clip kit, andwall adapter), a Subject Response Device and a Base Station laptop computer. Thesoftware on the Base Station laptop computer is intended for device functioning
PhysioMonitor Hub with FlexVision Inclinomters DynaVision Dynamic sEMG and ScanV
PhysioMonitor Hub with FlexVision Inclinomters DynaVision Dynamic sEMG and ScanVision Lite Static sEMG Scanner