The DR-ID 1811SE, DR-ID 1812SE and DR-ID 1814SE incorporate a CsI indirect panel
The DR-ID 1811SE, DR-ID 1812SE and DR-ID 1814SE incorporate a CsI indirect panel. The indirect-conversion flat panel sensor is a device which acquires a general radiograph.
MQB
Solid state x-ray imager (flat panel/digital imager)
The DR-XD 3000 is a mobile C-arm system with detachable flat panel detector, whi
The DR-XD 3000 is a mobile C-arm system with detachable flat panel detector, which is intended for use in providing medical imaging for general populations including pediatrics.The device provides pulsed fluoroscopic imaging of patients during diagnostic, interventional and surgical procedures and digital radiographic imaging.It is intended for use in procedures such as holangiography, endoscopic, urologic, orthopedic, neurologic, critical care, peripheral vascular, emergency room procedures.This device does not support cardiac procedures and is not intended for use in performing mammography.
The DR-ID 1811SE, DR-ID 1812SE and DR-ID 1814SE incorporate a CsI indirect panel
The DR-ID 1811SE, DR-ID 1812SE and DR-ID 1814SE incorporate a CsI indirect panel. The indirect-conversion flat panel sensor is a device which acquires a general radiograph.
MQB
Solid state x-ray imager (flat panel/digital imager)
The DR-ID 1801SE and DR-ID 1802SE incorporate a GOS indirect panel. The indirect
The DR-ID 1801SE and DR-ID 1802SE incorporate a GOS indirect panel. The indirect-conversion flat panel sensor is a device which acquires a general radiograph.
MQB
Solid state x-ray imager (flat panel/digital imager)
The DR-XD 1000 (FDR AQRO) is a digital mobile X-ray system intended for use in g
The DR-XD 1000 (FDR AQRO) is a digital mobile X-ray system intended for use in general purposeradiography for generating radiographic images of human anatomy, including adult, pediatric, andneonatal exams. The DR-XD 1000 is not intended for mammography applications.
The Wired/Wireless FDR ES (DR-ID1270) flat panel sensor system is intended to ca
The Wired/Wireless FDR ES (DR-ID1270) flat panel sensor system is intended to capture for display radiographic images of human anatomy. It is intended for use in general projection radiographic applications including pediatric and neonatal exams wherever conventional film/screen or CR systems may be used. It is not intended for mammography, fluoroscopy, tomography, and angiography applications.
MQB
Solid state x-ray imager (flat panel/digital imager)
The DR-XD 1000 (FDR AQRO) is a digital mobile X-ray system intended for use in g
The DR-XD 1000 (FDR AQRO) is a digital mobile X-ray system intended for use in general purposeradiography for generating radiographic images of human anatomy, including adult, pediatric, andneonatal exams. The DR-XD 1000 is not intended for mammography applications.
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 12
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 1211SE, DR-ID 1212SE and DR-ID 1213SE incorporate a CsI indirect panel. The indirect-conversion flat panel sensor is a device which acquires a general radiograph.
MQB
Solid state x-ray imager (flat panel/digital imager)
Before moving the vehicle, be sure to turn off the FCR PRIMA Tm and insert the d
Before moving the vehicle, be sure to turn off the FCR PRIMA Tm and insert the dummy cassette.
MQB
Solid state x-ray imager (flat panel/digital imager)
A cable used for connecting the flat panel sensor and the optional access point.
A cable used for connecting the flat panel sensor and the optional access point. This cable is used for wired communication if wireless communication is not available.
MQB
Solid state x-ray imager (flat panel/digital imager)
A device supplying power to the flat panel sensor and connecting between theflat
A device supplying power to the flat panel sensor and connecting between theflat panel sensor and the control cabinet.
MQB
Solid state x-ray imager (flat panel/digital imager)
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 12
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 1211SE, DR-ID 1212SE and DR-ID 1213SE incorporate a CsI indirect panel. The indirect-conversion flat panel sensor is a device which acquires a general radiograph.
MQB
Solid state x-ray imager (flat panel/digital imager)
Supplies the power to the flat panel sensor and connects the flat panel sensor a
Supplies the power to the flat panel sensor and connects the flat panel sensor and the control cabinet.
MQB
Solid state x-ray imager (flat panel/digital imager)
The FCR XL-2/FCR Aspire CRm (CR-IR 359) is equipment designed to read X-ray imag
The FCR XL-2/FCR Aspire CRm (CR-IR 359) is equipment designed to read X-ray image information recorded on an imaging plate (IP).
MQB
Solid state x-ray imager (flat panel/digital imager)
The DR-ID 600SE, DR-ID 601SE and DR-ID 602SE incorporate a GOS indirect panel. T
The DR-ID 600SE, DR-ID 601SE and DR-ID 602SE incorporate a GOS indirect panel. The DR-ID 611SE, DR-ID 612SE and DR-ID 613SE incorporate a CsI indirect panel. There are six types of flat panel sensors: DR-ID 601SE, DR-ID 602SE, DR-ID 611SE, DR-ID 612SE and DR-ID 613SE (wireless/wired communication mode) and DR-ID 600SE (wired communication mode).
MQB
Solid state x-ray imager (flat panel/digital imager)
Inserting the Fuji Imaging Plate ST-VI 15cmx30cm into the adapter to insert it i
Inserting the Fuji Imaging Plate ST-VI 15cmx30cm into the adapter to insert it into 35cmx43cm cassette makes image reading in the Fuji Computed Radiography possible.
MQB
Solid state x-ray imager (flat panel/digital imager)
Before moving the vehicle, be sure to turn off the FCR PRIMA T and insert the du
Before moving the vehicle, be sure to turn off the FCR PRIMA T and insert the dummy cassette.
MQB
Solid state x-ray imager (flat panel/digital imager)
Adjust the depth that the needle is inserted. The slide stopper differs for each
Adjust the depth that the needle is inserted. The slide stopper differs for each needle. Use a slide stopper that suits each type of needle being used.
The FCR PRIMA II (CR-IR 391RU) is equipment designed to read X-ray image informa
The FCR PRIMA II (CR-IR 391RU) is equipment designed to read X-ray image information recorded on an imaging plate (IP).
MQB
Solid state x-ray imager (flat panel/digital imager)
Supplies the power to the flat panel sensor and connects the flat panel sensor a
Supplies the power to the flat panel sensor and connects the flat panel sensor and the control cabinet.
MQB
Solid state x-ray imager (flat panel/digital imager)
DR-ID 800 (FDR D-EVO Mobile Compo) is digital radiography equipment for mounting
DR-ID 800 (FDR D-EVO Mobile Compo) is digital radiography equipment for mounting on the Mobile Cart and employs an indirect-conversion FPD.
MQB
Solid state x-ray imager (flat panel/digital imager)
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 12
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 1211SE, DR-ID 1212SE and DR-ID 1213SE incorporate a CsI indirect panel. The indirect-conversion flat panel sensor is a device which acquires a general radiograph.
MQB
Solid state x-ray imager (flat panel/digital imager)
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 12
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 1211SE, DR-ID 1212SE and DR-ID 1213SE incorporate a CsI indirect panel. The indirect-conversion flat panel sensor is a device which acquires a general radiograph.
MQB
Solid state x-ray imager (flat panel/digital imager)
The Console is a workstation intended to associate digital (for DR) images with
The Console is a workstation intended to associate digital (for DR) images with patient and exam information, apply image processing to facilitate diagnosis, display the image, and output the resulting image and exam data for further display, distribution, or archiving.
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 12
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 1211SE, DR-ID 1212SE and DR-ID 1213SE incorporate a CsI indirect panel. The indirect-conversion flat panel sensor is a device which acquires a general radiograph.
MQB
Solid state x-ray imager (flat panel/digital imager)
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 12
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 1211SE, DR-ID 1212SE and DR-ID 1213SE incorporate a CsI indirect panel. The indirect-conversion flat panel sensor is a device which acquires a general radiograph.
MQB
Solid state x-ray imager (flat panel/digital imager)
DR-ID 800 (FDR D-EVO Mobile Compo) is digital radiography equipment for mounting
DR-ID 800 (FDR D-EVO Mobile Compo) is digital radiography equipment for mounting on the Mobile Cart and employs an indirect-conversion FPD.
MQB
Solid state x-ray imager (flat panel/digital imager)
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 12
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 1211SE, DR-ID 1212SE and DR-ID 1213SE incorporate a CsI indirect panel. The indirect-conversion flat panel sensor is a device which acquires a general radiograph.
MQB
Solid state x-ray imager (flat panel/digital imager)
A personal computer used for controlling the flat panel sensor and performing im
A personal computer used for controlling the flat panel sensor and performing image processing.
MQB
Solid state x-ray imager (flat panel/digital imager)
A personal computer used for controlling the flat panel sensor and performing im
A personal computer used for controlling the flat panel sensor and performing image processing.
MQB
Solid state x-ray imager (flat panel/digital imager)
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 12
The DR-ID 1201SE and DR-ID 1202SE incorporate a GOS indirect panel. The DR-ID 1211SE, DR-ID 1212SE and DR-ID 1213SE incorporate a CsI indirect panel. The indirect-conversion flat panel sensor is a device which acquires a general radiograph.
MQB
Solid state x-ray imager (flat panel/digital imager)
The DR-ID 600SE, DR-ID 601SE and DR-ID 602SE incorporate a GOS indirect panel. T
The DR-ID 600SE, DR-ID 601SE and DR-ID 602SE incorporate a GOS indirect panel. The DR-ID 611SE, DR-ID 612SE and DR-ID 613SE incorporate a CsI indirect panel. There are six types of flat panel sensors: DR-ID 601SE, DR-ID 602SE, DR-ID 611SE, DR-ID 612SE and DR-ID 613SE (wireless/wired communication mode) and DR-ID 600SE (wired communication mode).
MQB
Solid state x-ray imager (flat panel/digital imager)
The FUJI Computed Radiography System FCR ClearView CS Plus/CSm Plus performs Dig
The FUJI Computed Radiography System FCR ClearView CS Plus/CSm Plus performs Digital Radiography by using an Imaging Plate (IP) as the X-ray detection device.
MQB
Solid state x-ray imager (flat panel/digital imager)
DSA-Cabinet; Manifold; Series 3316; DSAC-M2-3316-TSI-R; TRICOR Label; Refurbishe
DSA-Cabinet; Manifold; Series 3316; DSAC-M2-3316-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet refurbished system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 33” wide / 16 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - Cabinet - Manifold (M2R) - Series 3316 - Refurbished
DSA-Cabinet; Manifold; Series 3308; DSAC-M2-3308-TSI-R; TRICOR Label; Refurbishe
DSA-Cabinet; Manifold; Series 3308; DSAC-M2-3308-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet refurbished system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 33” wide / 8 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - Cabinet - Manifold (M2R) - Series 3308 - Refurbished
DSA-Cabinet; Manifold; Series 2310; DSAC-M2-2310-TSI-R; TRICOR Label; Refurbishe
DSA-Cabinet; Manifold; Series 2310; DSAC-M2-2310-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet refurbished system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 23” wide / 10 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - Cabinet - Manifold (M2R) - Series 2310 - Refurbished
Dri-Scope Aid - Cabinet refurbished system is intended to aid in drying and vent
Dri-Scope Aid - Cabinet refurbished system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 23” wide / 5 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - Cabinet - Manifold (M2R) - Series 2305 - Refurbished
Dri-Scope Aid-Cabinet; Pump Wall BL1; Series 1840; DSAC-PW3-MOB; TRICOR Label;Dr
Dri-Scope Aid-Cabinet; Pump Wall BL1; Series 1840; DSAC-PW3-MOB; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system. Note: this system has been programmed to accept external software commands and/or remote monitoring via Mobile Aspects proprietary hardware and software.
Dri-Scope Aid - Cabinet - Pump Wall (P3) - Series 1840 - Mobile Aspects
Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 3316; DSC2-M1-3316-TSI; TRICOR L
Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 3316; DSC2-M1-3316-TSI; TRICOR Label;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 33” wide / 16 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - [Gen 2] Cabinet - Manifold (M1) - Series 3316
Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 3308; DSC2-M1-3308-TSI; TRICOR L
Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 3308; DSC2-M1-3308-TSI; TRICOR Label;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 33” wide / 8 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - [Gen 2] Cabinet - Manifold (M1) - Series 3308
Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 2310; DSC2-M1-2310-TSI; TRICOR L
Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 2310; DSC2-M1-2310-TSI; TRICOR Label;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 23” wide / 10 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - [Gen 2] Cabinet - Manifold (M1) - Series 2310
Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 2305; DSC2-M1-2305-TSI; TRICOR L
Dri-Scope Aid-Cabinet [Gen 2]; Manifold; Series 2305; DSC2-M1-2305-TSI; TRICOR Label;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 23” wide / 5 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - [Gen 2] Cabinet - Manifold (M1) - Series 2305
Dri-Scope Aid-Cabinet [Gen 2]; Regulator Ceiling; Series 1840; DSC2-RC3-TSI; TRI
Dri-Scope Aid-Cabinet [Gen 2]; Regulator Ceiling; Series 1840; DSC2-RC3-TSI; TRICOR Label;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) ceiling-mounted regulator version is one component of the Dri-Scope Aid – Cabinet system that contains a precision regulator used to provide HEPA filtered air to other parts of the system from an external medical air source. This regulator component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system.
Dri-Scope Aid - [Gen 2] Cabinet - Regulator Ceiling (R3) - Series 1840
Dri-Scope Aid-Cabinet [Gen 2]; Regulator Wall; Series 1840; DSC2-RW3-TSI; TRICOR
Dri-Scope Aid-Cabinet [Gen 2]; Regulator Wall; Series 1840; DSC2-RW3-TSI; TRICOR Label;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted regulator version is one component of the Dri-Scope Aid – Cabinet system that contains a precision regulator used to provide HEPA filtered air to other parts of the system from an external medical air source. This regulator component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system.
Dri-Scope Aid - [Gen 2] Cabinet - Regulator Wall (R3) - Series 1840
Dri-Scope Aid-Cabinet [Gen 2]; Pump Ceiling BL1; Series 1840; DSC2-PC3-TSI; TRIC
Dri-Scope Aid-Cabinet [Gen 2]; Pump Ceiling BL1; Series 1840; DSC2-PC3-TSI; TRICOR Label;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) ceiling-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system.
Dri-Scope Aid - [Gen 2] Cabinet - Pump Ceiling (P3) - Series 1840
Dri-Scope Aid-Cabinet [Gen 2]; Pump Wall BL1; Series 1840; DSC2-PW3-TSI; TRICOR
Dri-Scope Aid-Cabinet [Gen 2]; Pump Wall BL1; Series 1840; DSC2-PW3-TSI; TRICOR Label;Dri-Scope Aid - Cabinet Gen 2 system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system.
Dri-Scope Aid - [Gen 2] Cabinet - Pump Wall (P3) - Series 1840
Dri-Scope Aid-Jet Stream; Regulator; Model 1840R; DSA3-R2-TSI; TRICOR Label;The
Dri-Scope Aid-Jet Stream; Regulator; Model 1840R; DSA3-R2-TSI; TRICOR Label;The Dri-Scope Aid Jet-Stream (Model 1840R) is a counter-top (or pole/wall mounted) device designed to assist in the drying of internal channels of an endoscope at the point of cleaning. The device's internal pressure regulator provides and distributes a constant flow of 0.1um HEPA-filtered externally supplied medical air to aid in the drying process after high-level cleaning and disinfecting. Dual-port, dual-timer allows one (or two) endoscopes to be connected simultaneously for drying. The device provides precision regulated air as well as air filter performance monitoring to assure proper pressure and air flow.
Dri-Scope Aid-Cabinet; Pump Ceiling; Series 1840; DSAC-PC2-MOB; TRICOR Label;Dri
Dri-Scope Aid-Cabinet; Pump Ceiling; Series 1840; DSAC-PC2-MOB; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) ceiling-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. Note: this system has been programmed to accept external software commands and/or remote monitoring via Mobile Aspects proprietary hardware and software.
Dri-Scope Aid-Cabinet; Pump Ceiling; Series 1840; DSAC-PC2-MOB; TRICOR Label;
Dri-Scope Aid-Cabinet; Pump Wall; Series 1840; DSAC-PW2-MOB; TRICOR Label;Dri-Sc
Dri-Scope Aid-Cabinet; Pump Wall; Series 1840; DSAC-PW2-MOB; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. Note: this system has been programmed to accept external software commands and/or remote monitoring via Mobile Aspects proprietary hardware and software.
Dri-Scope Aid - Cabinet - Pump Wall (P2) - Series 1840 - Mobile Aspects
Dri-Scope Aid-Cabinet; Pump Ceiling BL2; Series 1840; DSAC-PC4-TSI; TRICOR Label
Dri-Scope Aid-Cabinet; Pump Ceiling BL2; Series 1840; DSAC-PC4-TSI; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) ceiling-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system. This component has been refurbished to a condition of safety and effectiveness that is comparable to when new.
Dri-Scope Aid - Cabinet - Pump Ceiling (P4R) - Series 1840
Dri-Scope Aid-Cabinet; Pump Ceiling BL1; Series 1840; DSAC-PC3-TSI; TRICOR Label
Dri-Scope Aid-Cabinet; Pump Ceiling BL1; Series 1840; DSAC-PC3-TSI; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) ceiling-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system. This component has been refurbished to a condition of safety and effectiveness that is comparable to when new.
Dri-Scope Aid - Cabinet - Pump Ceiling (P3R) - Series 1840
Dri-Scope Aid-Cabinet; Pump Wall BL2; Series 1840; DSAC-PW4-TSI; TRICOR Label; R
Dri-Scope Aid-Cabinet; Pump Wall BL2; Series 1840; DSAC-PW4-TSI; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system. This pump component has been refurbished to a condition of safety and effectiveness that is comparable to when new.
Dri-Scope Aid - Cabinet - Pump Wall (P4R) - Series 1840
Dri-Scope Aid-Cabinet; Pump Wall BL1; Series 1840; DSAC-PW3-TSI; TRICOR Label; R
Dri-Scope Aid-Cabinet; Pump Wall BL1; Series 1840; DSAC-PW3-TSI; TRICOR Label; Reburbished;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system. This pump component has been refurbished to a condition of safety and effectiveness that is comparable to when new.
Dri-Scope Aid - Cabinet - Pump Wall (P3R) - Series 1840
Dri-Scope Aid-Cabinet; Pump Ceiling BL2; Series 1840; DSAC-PC4-SLR; Solaire Labe
Dri-Scope Aid-Cabinet; Pump Ceiling BL2; Series 1840; DSAC-PC4-SLR; Solaire Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / SOLAIRE Medical - labeled) ceiling-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system.
Dri-Scope Aid - Cabinet - Pump Ceiling (P4) - Series 1840 - Solaire
Dri-Scope Aid-Cabinet; Pump Ceiling BL1; Series 1840; DSAC-PC3-SLR; Solaire Labe
Dri-Scope Aid-Cabinet; Pump Ceiling BL1; Series 1840; DSAC-PC3-SLR; Solaire Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / SOLAIRE Medical - labeled) ceiling-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system.
Dri-Scope Aid - Cabinet - Pump Ceiling (P3) - Series 1840 - Solaire
Dri-Scope Aid-Cabinet; Pump Wall BL2; Series 1840; DSAC-PW4-SLR; Solaire Label;D
Dri-Scope Aid-Cabinet; Pump Wall BL2; Series 1840; DSAC-PW4-SLR; Solaire Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / SOLAIRE Medical - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system.
Dri-Scope Aid - Cabinet - Pump Wall (P4) - Series 1840 - Solaire
Dri-Scope Aid-Cabinet; Pump Wall BL1; Series 1840; DSAC-PW3-SLR; Solaire Label;D
Dri-Scope Aid-Cabinet; Pump Wall BL1; Series 1840; DSAC-PW3-SLR; Solaire Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / SOLAIRE Medical - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system.
Dri-Scope Aid - Cabinet - Pump Wall (P3) - Series 1840 - Solaire
Dri-Scope Aid-Cabinet; Regulator Ceiling; Series 1840; DSAC-RC2-TSI; TRICOR Labe
Dri-Scope Aid-Cabinet; Regulator Ceiling; Series 1840; DSAC-RC2-TSI; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) ceiling-mounted regulator version is one component of the Dri-Scope Aid – Cabinet system that contains a precision regulator used to provide HEPA filtered air to other parts of the system from an external medical air source. This regulator component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system.
Dri-Scope Aid - Cabinet - Regulator Ceiling (R2) - Series 1840
Dri-Scope Aid-Cabinet; Regulator Wall; Series 1840; DSAC-RW2-TSI; TRICOR Label;D
Dri-Scope Aid-Cabinet; Regulator Wall; Series 1840; DSAC-RW2-TSI; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted regulator version is one component of the Dri-Scope Aid – Cabinet system that contains a precision regulator used to provide HEPA filtered air to other parts of the system from an external medical air source. This regulator component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system.
Dri-Scope Aid - Cabinet - Regulator Wall (R2) - Series 1840
Dri-Scope Aid-Cabinet; Pump Ceiling BL2; Series 1840; DSAC-PC4-TSI; TRICOR Label
Dri-Scope Aid-Cabinet; Pump Ceiling BL2; Series 1840; DSAC-PC4-TSI; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) ceiling-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system.
Dri-Scope Aid - Cabinet - Pump Ceiling (P4) - Series 1840
Dri-Scope Aid-Cabinet; Pump Ceiling BL1; Series 1840; DSAC-PC3-TSI; TRICOR Label
Dri-Scope Aid-Cabinet; Pump Ceiling BL1; Series 1840; DSAC-PC3-TSI; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) ceiling-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system.
Dri-Scope Aid - Cabinet - Pump Ceiling (P3) - Series 1840
Dri-Scope Aid-Cabinet; Pump Wall BL2; Series 1840; DSAC-PW4-TSI; TRICOR Label;Dr
Dri-Scope Aid-Cabinet; Pump Wall BL2; Series 1840; DSAC-PW4-TSI; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system.
Dri-Scope Aid - Cabinet - Pump Wall (P4) - Series 1840
Dri-Scope Aid-Cabinet; Pump Wall BL1; Series 1840; DSAC-PW3-TSI; TRICOR Label;Dr
Dri-Scope Aid-Cabinet; Pump Wall BL1; Series 1840; DSAC-PW3-TSI; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system.
Dri-Scope Aid - Cabinet - Pump Wall (P3) - Series 1840
Dri-Scope Aid-Jet Stream; Pump BL2; Model 1840P; DSA3-P3-TSI; TRICOR Label;The D
Dri-Scope Aid-Jet Stream; Pump BL2; Model 1840P; DSA3-P3-TSI; TRICOR Label;The Dri-Scope Aid Jet-Stream (Model 1840P) is a counter-top (or pole/wall mounted) device designed to assist in the drying of internal channels of an endoscope at the point of cleaning. The device's internal pump provides a constant flow of 0.1um HEPA-filtered air to aid in the drying process after high-level cleaning and disinfecting has been done. Dual-port, dual-timer allows one (or two) endoscopes to be connected simultaneously for drying. The programmable device provides automatic high pressure shutoff protection as well as air filter performance monitoring to assure proper pressure and air flow.
Dri-Scope Aid-Jet Stream; Pump BL1; Model 1840P; DSA3-P2-TSI; TRICOR Label;The D
Dri-Scope Aid-Jet Stream; Pump BL1; Model 1840P; DSA3-P2-TSI; TRICOR Label;The Dri-Scope Aid Jet-Stream (Model 1840P) is a counter-top (or pole/wall mounted) device designed to assist in the drying of internal channels of an endoscope at the point of cleaning. The device's internal pump provides a constant flow of 0.1um HEPA-filtered air to aid in the drying process after high-level cleaning and disinfecting has been done. Dual-port, dual-timer allows one (or two) endoscopes to be connected simultaneously for drying. The programmable device provides automatic high pressure shutoff protection as well as air filter performance monitoring to assure proper pressure and air flow.
Dri-Scope Aid-Cabinet; Pump Ceiling; Series 1840; DSAC-PC2-TSI-R; TRICOR Label;
Dri-Scope Aid-Cabinet; Pump Ceiling; Series 1840; DSAC-PC2-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) ceiling-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system. This component has been refurbished to a condition of safety and effectiveness that is comparable to when new.
Dri-Scope Aid - Cabinet - Pump Ceiling (P2R) - Series 1840
Dri-Scope Aid-Cabinet; Pump Wall; Series 1840; DSAC-PW2-TSI-R; TRICOR Label; Ref
Dri-Scope Aid-Cabinet; Pump Wall; Series 1840; DSAC-PW2-TSI-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet (DSAC) system that contains an internal pump used to provide HEPA filtered air to the DSAC system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system. This pump component has been refurbished to a condition of safety and effectiveness that is comparable to when new.
Dri-Scope Aid - Cabinet - Pump Wall (P2R) - Series 1840
Dri-Scope Aid-Cabinet; Manifold; Series 3316; DSAC-M2-3316-SLR; Solaire Label;Dr
Dri-Scope Aid-Cabinet; Manifold; Series 3316; DSAC-M2-3316-SLR; Solaire Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / SOLAIRE Medical - labeled) 33” wide / 16 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - Cabinet - Manifold (M2) - Series 3316 - Solaire
Dri-Scope Aid-Cabinet; Manifold; Series 3308; DSAC-M2-3308-SLR; Solaire Label;Dr
Dri-Scope Aid-Cabinet; Manifold; Series 3308; DSAC-M2-3308-SLR; Solaire Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / SOLAIRE Medical - labeled) 33” wide / 8 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - Cabinet - Manifold (M2) - Series 3308 - Solaire
Dri-Scope Aid-Cabinet; Manifold; Series 2310; DSAC-M2-2310-SLR; Solaire Label;Dr
Dri-Scope Aid-Cabinet; Manifold; Series 2310; DSAC-M2-2310-SLR; Solaire Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / SOLAIRE Medical - labeled) 23” wide / 10 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - Cabinet - Manifold (M2) - Series 2310 - Solaire
Dri-Scope Aid-Cabinet; Manifold; Series 2305; DSAC-M2-2305-SLR; Solaire Label;Dr
Dri-Scope Aid-Cabinet; Manifold; Series 2305; DSAC-M2-2305-SLR; Solaire Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / SOLAIRE Medical - labeled) 23” wide / 5 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - Cabinet - Manifold (M2) - Series 2305 - Solaire
Dri-Scope Aid-Cabinet; Pump Ceiling; Series 1840; DSAC-PC2-SLR; Solaire Label;Dr
Dri-Scope Aid-Cabinet; Pump Ceiling; Series 1840; DSAC-PC2-SLR; Solaire Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / SOLAIRE Medical - labeled) ceiling-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system.
Dri-Scope Aid - Cabinet - Pump Ceiling (P2) - Series 1840 - Solaire
Dri-Scope Aid-Cabinet; Pump Wall; Series 1840; DSAC-PW2-SLR; Solaire Label;Dri-S
Dri-Scope Aid-Cabinet; Pump Wall; Series 1840; DSAC-PW2-SLR; Solaire Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / SOLAIRE Medical - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system.
Dri-Scope Aid - Cabinet - Pump Wall (P2) - Series 1840 - Solaire
Dri-Scope Aid-Cabinet; Manifold; Series 3316; DSAC-M2-3316-TSI; TRICOR Label;Dri
Dri-Scope Aid-Cabinet; Manifold; Series 3316; DSAC-M2-3316-TSI; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 33” wide / 16 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - Cabinet - Manifold (M2) - Series 3316
Dri-Scope Aid-Cabinet; Manifold; Series 3308; DSAC-M2-3308-TSI; TRICOR Label;Dri
Dri-Scope Aid-Cabinet; Manifold; Series 3308; DSAC-M2-3308-TSI; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 33” wide / 8 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - Cabinet - Manifold (M2) - Series 3308
Dri-Scope Aid-Cabinet; Manifold; Series 2310; DSAC-M2-2310-TSI; TRICOR Label;Dri
Dri-Scope Aid-Cabinet; Manifold; Series 2310; DSAC-M2-2310-TSI; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 23” wide / 10 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - Cabinet - Manifold (M2) - Series 2310
Dri-Scope Aid-Cabinet; Manifold; Series 2305; DSAC-M2-2305-TSI; TRICOR Label;Dri
Dri-Scope Aid-Cabinet; Manifold; Series 2305; DSAC-M2-2305-TSI; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis around the clock. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) 23” wide / 5 port manifold is one component of the Dri-Scope Aid – Cabinet system that receives the HEPA filtered air from the system pump and distributes it to the endoscope(s) for the purpose of drying and venting.
Dri-Scope Aid - Cabinet - Manifold (M2) - Series 2305
Dri-Scope Aid-Cabinet; Pump Ceiling; Series 1840; DSAC-PC2-TSI; TRICOR Label;Dri
Dri-Scope Aid-Cabinet; Pump Ceiling; Series 1840; DSAC-PC2-TSI; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) ceiling-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system.
Dri-Scope Aid - Cabinet - Pump Ceiling (P2) - Series 1840
Dri-Scope Aid-Cabinet; Pump Wall; Series 1840; DSAC-PW2-TSI; TRICOR Label;Dri-Sc
Dri-Scope Aid-Cabinet; Pump Wall; Series 1840; DSAC-PW2-TSI; TRICOR Label;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system.
Dri-Scope Aid - Cabinet - Pump Wall (P2) - Series 1840
Dri-Scope Aid-Jet Stream; Regulator; Model 1840R; DSA3-R1-TSI; TRICOR Label;The
Dri-Scope Aid-Jet Stream; Regulator; Model 1840R; DSA3-R1-TSI; TRICOR Label;The Dri-Scope Aid Jet-Stream (Model 1840R) is a counter-top (or pole/wall mounted) device designed to assist in the drying of internal channels of an endoscope at the point of cleaning. The device's internal pressure regulator provides and distributes a constant flow of 0.1um HEPA-filtered externally supplied medical air to aid in the drying process after high-level cleaning and disinfecting. Dual-port, dual-timer allows one (or two) endoscopes to be connected simultaneously for drying. The device provides precision regulated air as well as air filter performance monitoring to assure proper pressure and air flow.
Dri-Scope Aid-Jet Stream; Pump; Model 1840P; DSA3-P1-TSI; TRICOR Label;The Dri-S
Dri-Scope Aid-Jet Stream; Pump; Model 1840P; DSA3-P1-TSI; TRICOR Label;The Dri-Scope Aid Jet-Stream (Model 1840P) is a counter-top (or pole/wall mounted) device designed to assist in the drying of internal channels of an endoscope at the point of cleaning. The device's internal pump provides a constant flow of 0.1um HEPA-filtered air to aid in the drying process after high-level cleaning and disinfecting has been done. Dual-port, dual-timer allows one (or two) endoscopes to be connected simultaneously for drying. The programmable device provides automatic high pressure shutoff protection as well as air filter performance monitoring to assure proper pressure and air flow.