The device is intended to be used for monitoring and recording of, and to genera
The device is intended to be used for monitoring and recording of, and to generate alarms for, multiple physiological parameters of adults, pediatrics, and neonates
Patient Cable for the Philips IntelliVue Neuro Muscular Transmission Module 8653
Patient Cable for the Philips IntelliVue Neuro Muscular Transmission Module 865383. Reusable Cable comes with green 12 pin module connector and splits on the opposite site into 3 individual wires - One 30 cm (12 inch) long wire with the acceleration sensor and two 20 cm (7,9 inch) long grabber lead sets connecting to snap style stimulation electrodes. Total cable length: 3 m ( 9,8 feet). 1 Sales Unit = 1 Cable.
EEG Trunk Cable, 4 channel, reusable, 2, 7 meter (8.8 ft) long, shielded for 9 l
EEG Trunk Cable, 4 channel, reusable, 2, 7 meter (8.8 ft) long, shielded for 9 lead EEG monitoring. Use with 98980310561, 989803180521 or 989803180531 lead sets. The 4 channel trunk cable can also be used for 2 channels. In this case lead sets M1931A, M1932A, M1934A are recommended.
EEG Lead Set with 9 individual color coded leads for use on neonatal and pediatr
EEG Lead Set with 9 individual color coded leads for use on neonatal and pediatric patients. Lead wires comes with DIN connector on one end and hard mounted EEG silver clip electrodes on the other end. Individual leads are hold in place with a lead organizer. Silver clip diameter = 6 mm, 80 cm (31.5 in) long leads. Use with trunk cable 989803180541and conductive paste M1937A.
EEG Lead Set with 9 individual color coded leads. Lead wires come with DIN conne
EEG Lead Set with 9 individual color coded leads. Lead wires come with DIN connector on one end and hard mounted mini cup (grabber style) to connect to any generic snap style electrode on the other end. Wires are hold in place with a lead organizer. 80 cm (31.5 in) long leads.Use with trunk cable 989803180541.
EEG Lead Set with 9 individual color coded leads for use on adults. Lead wires c
EEG Lead Set with 9 individual color coded leads for use on adults. Lead wires come with DIN connector on one end and hard mounted EEG silver cup electrodes on the other end. Individual leads are hold in place with a lead organizer. Silver cup diameter = 10mm, 80 cm (31.5 in) long leads.Use with trunk cable 989803180541 and conductive paste M1937A.
A combination of single-use products intended to attach the Sentec Sensors to co
A combination of single-use products intended to attach the Sentec Sensors to conventional measurement sites, recommended for adult, pediatric and neonatal patients with sensitive/fragile skin.
Patient Application Kit for sensitive/fragile skin
A combination of single-use products intended to attach the Sentec sensors to co
A combination of single-use products intended to attach the Sentec sensors to conventional measurement sites, recommended for adult, pediatric and neonatal patients with mature/intact skin
A combination of single-use products intended to attach the Sentec sensors to th
A combination of single-use products intended to attach the Sentec sensors to the earlobe of the patient, recommended for patients with mature/intact skin.
Patient Application Kit with Ear Clip for mature/intact skin
The membrane and the electrolyte of SenTec TC Sensors must be changed periodical
The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. The MC is single-use.
This cover will protect the SenTec Digital Monitor (SDM) from dripping water whe
This cover will protect the SenTec Digital Monitor (SDM) from dripping water when the device is tilted up to 15° (IPX2).
The Contact Gel is required for proper CO2 gas conduction from the patient's ski
The Contact Gel is required for proper CO2 gas conduction from the patient's skin to the SenTec TC Sensors. Every time a SenTec TC Sensor is to be attached to the measurement site, one drop of Contact Gel must be applied to the center of the Sensor membrane.
Single patient use sensor application ear clip, recommended for adult, pediatric
Single patient use sensor application ear clip, recommended for adult, pediatric and neonatal patients with mature/intact skin
Single use sensor application ring, recommended for adult, pediatric and neonata
Single use sensor application ring, recommended for adult, pediatric and neonatal patients with sensitive/fragile skin
Multi-Site Attachment Ring for fragile/sensitive skin
Single use sensor application ring, recommended for adult, pediatric and neonata
Single use sensor application ring, recommended for adult, pediatric and neonatal patients with mature/intact skin
PC based software required a) to configure special (safety-relevant) settings of
PC based software required a) to configure special (safety-relevant) settings of the SenTec Digital Monitor (SDM), b) to manage ‘SDM Parameters Settings’ and c) to download trend data from the internal memory of the SDM to a PC. It includes features to analyze and view the downloaded trend data. The V-STATS™ software includes the V-CareNeT™ Package, which enables remote monitoring and alarm surveillance for multiple SDMs being connected to the same network as the PC with V-STATS™.
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)
Stand alone monitor with colour display for continuous non-invasive vital parame
Stand alone monitor with colour display for continuous non-invasive vital parameter monitoring, with integrated docking station for sensor storage and calibration.
SenTec Digital Monitor (with activated PO2 channel)
Digital Sensor for non-invasive and continuous measurement of transcutaneous car
Digital Sensor for non-invasive and continuous measurement of transcutaneous carbon dioxide and oxygen partial pressure as well as pulse oximetry. Suitable for adult, pediatric and neonatal patients.
Neonatal Starter Set (without Service Gas) contains:Multi-Site Attachment Rings
Neonatal Starter Set (without Service Gas) contains:Multi-Site Attachment Rings for mature/intact skin (MAR-MI)Multi-Site Attachment Rings for sensitive/fragile skin (MAR-SF)Membrane Changer tool (reloadable) (MC-R)Contact Gel (GEL-04)Service Gas (GAS-0812)
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG).
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG).
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)
The Staysite Adhesive (SA-MAR), is an optional, single-use adhesive which is ind
The Staysite Adhesive (SA-MAR), is an optional, single-use adhesive which is indicated for use with Multi-Site Attachment Rings, models MAR-MI and MAR-SF if more secure attachment is required.
Digital Sensor for non-invasive and continuous measurement of transcutaneous car
Digital Sensor for non-invasive and continuous measurement of transcutaneous carbon dioxide partial pressure and pulse oximetry. Suitable for adult, pediatric and neonatal patients.
The Membrane Changer (MC-R) is a reloadable tool to change the membrane of SenTe
The Membrane Changer (MC-R) is a reloadable tool to change the membrane of SenTec TC Sensors. Prior reuse, the Membrane Changer (MC-R) must be reloaded with a new Membrane Changer Insert (MC-I). The MC-I is single-use
The membrane and the electrolyte of SenTec TC Sensors must be changed periodical
The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC-R) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. To enable an economic and cost saving membrane change, the Membrane Changer after use can be reloaded with a new Membrane Changer Insert (MC-I). The memrane changer set contains the MC-R and inserts (MC-I) to reload.Membrane Changer Set [1 membrane changer, 1 insert]
Neonatal Starter Set contains:Multi-Site Attachment Rings for mature/intact skin
Neonatal Starter Set contains:Multi-Site Attachment Rings for mature/intact skin (MAR-MI)Multi-Site Attachment Rings for sensitive/fragile skin (MAR-SF)Membrane Changer tool (reloadable) (MC-R)Contact Gel (GEL-04)Service Gas (GAS-0812)
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Pol
The PSG Adapter Cable is intended to interface the SenTec Digital Monitor to Polygraphs (PG) or Polysomnographs (PSG)