The drilling guide is placed in the plate on the bone and is used to guide the d
The drilling guide is placed in the plate on the bone and is used to guide the drilling of the bone and protect the soft tissues.
The drilling guide is placed in the plate on the bone and is used to guide the d
The drilling guide is placed in the plate on the bone and is used to guide the drilling of the bone and protect the soft tissues.
The conical reamer of diameter 13.5 mm and of total length 350 mm for Panta® XL
The conical reamer of diameter 13.5 mm and of total length 350 mm for Panta® XL Nail is used to ream the intramedullary canal to prepare the nail insertion.
The conical reamer of diameter 12.5 mm and of total length 350 mm for Panta® XL
The conical reamer of diameter 12.5 mm and of total length 350 mm for Panta® XL Nail is used to ream the intramedullary canal to prepare the nail insertion.
The conical reamer of diameter 11.5 mm and of total length 350 mm for Panta® XL
The conical reamer of diameter 11.5 mm and of total length 350 mm for Panta® XL Nail is used to ream the intramedullary canal to prepare the nail insertion.
The conical reamer of diameter 10.5 mm and of total length 350 mm for Panta® XL
The conical reamer of diameter 10.5 mm and of total length 350 mm for Panta® XL Nail is used to ream the intramedullary canal to prepare the nail insertion.
The cannulated drill of diameter 9.0 mm and of total length 220 mm is used to pr
The cannulated drill of diameter 9.0 mm and of total length 220 mm is used to pre-drill before the reaming of the intramedullary canal.
The medium drill of diameter 4.3 mm and of total length 235 mm is used to pre-dr
The medium drill of diameter 4.3 mm and of total length 235 mm is used to pre-drill before the reaming of the intramedullary canal.
The cannulated drill of diameter 7.0 mm and of total length 220 mm is used to pr
The cannulated drill of diameter 7.0 mm and of total length 220 mm is used to pre-drill before the reaming of the intramedullary canal.
The long drill of diameter 4.3 mm and of total length 250 mm is used to pre-dril
The long drill of diameter 4.3 mm and of total length 250 mm is used to pre-drill before the insertion of the calcaneus screws.
The drill of diameter 5.0 mm and of total length 180 mm is used to drill before
The drill of diameter 5.0 mm and of total length 180 mm is used to drill before the insertion of the compression rod.
The drill of diameter 4.3 mm and of total length 210 mm is used to pre-drill bef
The drill of diameter 4.3 mm and of total length 210 mm is used to pre-drill before the insertion of the tibial screws and the optional talar screw.
The short drill of diameter 4.3 mm and of total length 210 mm is used to pre-dri
The short drill of diameter 4.3 mm and of total length 210 mm is used to pre-drill before the insertion of the calcaneus screws.
The lengthened medium drill of diameter 4.3 mm and of total length 275 mm is use
The lengthened medium drill of diameter 4.3 mm and of total length 275 mm is used to pre-drill before the insertion of the calcaneus screws.
The implant sizer for T and U plates is used to choose the appropriate size of t
The implant sizer for T and U plates is used to choose the appropriate size of the final implant and to define the correct plate configuration and position.
The drill of diameter 2.0 mm and of total length 100 mm with AO attachment is us
The drill of diameter 2.0 mm and of total length 100 mm with AO attachment is used to pre-drill before the insertion of the screws.
The drill of diameter 2.0 mm and of total length 100 mm is used to pre-drill bef
The drill of diameter 2.0 mm and of total length 100 mm is used to pre-drill before the insertion of the screws.
The drill of diameter 3.5 mm and of total length 200 mm with AO attachment is us
The drill of diameter 3.5 mm and of total length 200 mm with AO attachment is used to pre-drill before the insertion of the 6.5 mm screws. Using a drilling guide, the screw length can be read from the calibrated scale on the drill.
The drill of diameter 3.0 mm and of total length 190 mm with AO attachment is us
The drill of diameter 3.0 mm and of total length 190 mm with AO attachment is used to pre-drill before the insertion of the 4.5 mm screws. Using a drilling guide, the screw length can be read from the calibrated scale on the drill.It is also used to drill the bone to prepare the implantation of Large UNI-CLIP® Staples.
The drill of diameter 2.7 mm and of total length 125 mm with AO attachment is us
The drill of diameter 2.7 mm and of total length 125 mm with AO attachment is used to pre-drill before the insertion of the screw. Using a drilling guide, the screw length can be read from the calibrated scale on the drill.
The '2 in 1' shouldered drill, with a 4.5mm diameter A-O attachment and a total
The '2 in 1' shouldered drill, with a 4.5mm diameter A-O attachment and a total length of 90mm, a five lip 3mm diameter countersink, is designed to drill in one single drive the body of the the 3.0 & 3.7mm screws and the shape of the screw heads to allow complete countersink.
The '2 in 1' shouldered drill, with a 4.5mm diameter A-O attachment and a total
The '2 in 1' shouldered drill, with a 4.5mm diameter A-O attachment and a total length of 90mm, a five lip 3mm diameter countersink, is designed to drill in one single drive the body of the 3.0 & 3.7mm screws and the shape of the screw heads to allow complete countersink.
The sterile '2 in 1' shouldered drill, with a 4.5mm diameter A-O attachment and
The sterile '2 in 1' shouldered drill, with a 4.5mm diameter A-O attachment and a total length of 90mm, a five lip 3mm diameter countersink, is designed to drill in one single drive the the 3.0 & 3.7mm screws and the shape of the screw heads to allow complete countersink.
The '2 in 1' shouldered drill, with a 4.5mm diameter A-O attachment and a total
The '2 in 1' shouldered drill, with a 4.5mm diameter A-O attachment and a total length of 90mm, a five lip 3mm diameter countersink, is designed to drill in one single drive the the 3.0 & 3.7mm screws and the shape of the screw heads to allow complete countersink.
The '2 in 1' cannulated shouldered drill, with a 4.5mm diameter A-O attachment a
The '2 in 1' cannulated shouldered drill, with a 4.5mm diameter A-O attachment and a total length of 65mm, with a four lip 3mm diameter countersink, is designed to drill in one single drive the body of the 3.0 & 3.7mm screws and the shape of the screw heads to allow complete countersink.
The cannulated drill, with a 4.5mm diameter A-O attachment and a total length of
The cannulated drill, with a 4.5mm diameter A-O attachment and a total length of 90mm, is used to drill the bone to prepare the implantation of the staples.
The cannulated graduated drill, with a three lip tip and a 6.0mm diameter tri sh
The cannulated graduated drill, with a three lip tip and a 6.0mm diameter tri shank attachment, is used to drill the bone for the insertion of the 6.5mm compression screws.
The long cannulated graduated drill, with a three lip tip and a 6.0mm diameter t
The long cannulated graduated drill, with a three lip tip and a 6.0mm diameter tri shank attachment, is used to drill the bone for the insertion of the 6.5mm compression screws.
The short cannulated drill, with a three lip tip and a 6.0mm diameter tri shank
The short cannulated drill, with a three lip tip and a 6.0mm diameter tri shank attachment, is used to drill the bone for the insertion of the 6.5mm compression screw heads. It must be used through the external protecting sleeve with reference 119552ND.
The short cannulated drill, with a three lip tip and a 6.0mm diameter tri shank
The short cannulated drill, with a three lip tip and a 6.0mm diameter tri shank attachment, is used to drill the bone for the insertion of the 4.0mm compression screw heads. It must be used through a protection sleeve.
The long cannulated drill, with a three lip tip and a 6.0mm diameter tri shank a
The long cannulated drill, with a three lip tip and a 6.0mm diameter tri shank attachment, is used to drill the bone for the insertion of the 4.0mm.
The 2' in 1' cannulated shouldered drill, with a 6.0mm diameter tri shank attach
The 2' in 1' cannulated shouldered drill, with a 6.0mm diameter tri shank attachment and a three lip 3mm diameter countersink, is designed to drill in one single drive the body of the 3.0 & 3.7mm compression screws and the shape of the screw heads to allow complete countersink.
The 2' in 1' cannulated shouldered drill, with a 6.0mm diameter tri shank attach
The 2' in 1' cannulated shouldered drill, with a 6.0mm diameter tri shank attachment and a total length of 90mm, a three lip 3mm diameter countersink, is designed to drill in one single drive the body of the 3.0 & 3.7mm compression screws and the shape of the screw heads to allow complete countersink.
The 2' in 1' short cannulated shouldered drill, with a three lip tip, a 6.0mm di
The 2' in 1' short cannulated shouldered drill, with a three lip tip, a 6.0mm diameter tri shank attachment and and a three lip 7mm diameter countersink, is used on a quick coupling handle, to prepare the location of the 7.5mm screw heads.
The cannulated graduated drill, with a three lip tip and a 6.0mm diameter tri sh
The cannulated graduated drill, with a three lip tip and a 6.0mm diameter tri shank attachment, is used to drill the bone for introduction of the 7.5mm screws.
The 2' in 1' short cannulated shouldered drill, with a 6.0mm diameter tri shank
The 2' in 1' short cannulated shouldered drill, with a 6.0mm diameter tri shank attachment and a total length of 113.5mm, and a three lip 5.8mm diameter countersink, is used to drill the bone for introduction of the 5.5mm screw heads.
The cannulated graduated drill, with a 6.0mm diameter tri shank attachment and a
The cannulated graduated drill, with a 6.0mm diameter tri shank attachment and a total length of 180mm, is used to drill the bone for the introduction of the 5.5mm screws.
The short cannulated drill, with a 6.0 mm diameter tri shank attachment, is used
The short cannulated drill, with a 6.0 mm diameter tri shank attachment, is used to prepare the cortex for insertion of 4.3mm screw head.
Non-sterile '2 in 1' shouldered drill to single drive the body of compression sc
Non-sterile '2 in 1' shouldered drill to single drive the body of compression screws and shape of the screw heads to allow complete countersink
The drill, with a two lip tip and a 4.5mm diameter A-O attachment and a total le
The drill, with a two lip tip and a 4.5mm diameter A-O attachment and a total length of 90mm, is used to drill the holes for the introduction of fixation screws or compression staples.
Non-sterile '2 in 1' shouldered drill to single drive the body of compression sc
Non-sterile '2 in 1' shouldered drill to single drive the body of compression screws and shape of the screw heads to allow complete countersink
Non-sterile '2 in 1' shouldered drill to single drive the body of compression sc
Non-sterile '2 in 1' shouldered drill to single drive the body of compression screws and shape of the screw heads to allow complete countersink.