The Radlink Laser Pro 16 is a film digitization system that follows a three-step
The Radlink Laser Pro 16 is a film digitization system that follows a three-step process of acquiring, selecting, and sending digitized films to any desired destination. A laser beam light source and a sealed optic path are used to scan the film that is driven by a clocked, stepping motor. It utilizes a 12-film auto loader, and its software provides image quality control and post-processing functions and enables distribution and routing of DICOM images through a healthcare network.
The PH GPS Bracket is comprised of Radlink proprietary software and hardware to
The PH GPS Bracket is comprised of Radlink proprietary software and hardware to duplicate Radlink user interface onto Philips reference monitor of the MVS utilizing a switch box that shifts the video signal between Philips and Radlink on the reference monitor. Not only does Radlink solution expand the field of view of Philips C-Arms utilizing Pano function, but it also facilitates intra-operative image analysis by assisting surgeons to evaluate acetabular cup position, limb length discrepancy, and femoral offset during Total Hip Arthroplasty. The PH GPS Bracket comes with software features such as image stitching and Surgeon’s Checklist™ software that provides surgeons with real-time feedback on orthopedic implant component positioning. Pre-operative images can be viewed on the device during surgery, which surgeons can use to reference against the intra-operative images captured during the procedure.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink GPS Tablet/Monitor Stand functions as a mobile workstation and charg
The Radlink GPS Tablet/Monitor Stand functions as a mobile workstation and charger for the Radlink GPS Tablet with a secondary monitor. The Radlink GPS Tablet provides surgeons with real-time feedback on orthopedic implant component positioning. Together, the GPS Tablet and its Surgeon’s Checklist software offer easy-to-follow steps designed to address challenges such as component positioning, sizing, limb length and offset restoration. The Radlink GPS Tablet consists of a Tablet PC computer system that uses a touchscreen monitor & other image display accessories. Pre-operative images can be viewed on the GPS Tablet during surgery, which surgeons can use to reference against the intraoperative images captured during the procedure. For posterior approach THA procedures, a flat panel detector (DR panel) is used to capture intraoperative images, which takes approximately four seconds to appear on the GPS Tablet. For anterior approach THA procedures, C-Arm images are instantaneously transferred to the GPS Tablet using the Radlink Wireless C-Arm Kit.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink Cassette is a digital imaging cassette that holds a flat panel detec
The Radlink Cassette is a digital imaging cassette that holds a flat panel detector during x-ray exposure and has a grid to absorb scattered radiation. This model is designed for 14"x17" plates.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink Cassette is a digital imaging cassette that holds a flat panel detec
The Radlink Cassette is a digital imaging cassette that holds a flat panel detector during x-ray exposure and has a grid to absorb scattered radiation.This model is designed for 10"x12" plates.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink Wireless C-Arm (WCA) Kit is an accessory device of the Radlink GPS (
The Radlink Wireless C-Arm (WCA) Kit is an accessory device of the Radlink GPS (Galileo Positioning System) & GPS Tablet that is used to wirelessly send images from a video source such as a C-Arm to the Radlink GPS or GPS Tablet. The Radlink Wireless C-Arm Kit is a computer system that accepts video signals from BNC, VGA, or DVI connections and converts these signals into an image file, which is then sent wirelessly to a Radlink GPS or GPS Tablet.
LMD
System, Digital Image Communications, Radiological
The Radlink DR Tablet Retrofit upgrades any existing portable x-ray machine into
The Radlink DR Tablet Retrofit upgrades any existing portable x-ray machine into a mobile digital radiography system.It is a permanently mounted Tablet PC for image acquisition with built-in PACS and DICOM connectivity. Radlink Pro-Imaging Acquisition and Post-Processing Software are featured on the system as well. It comes with a Cesium wireless flat panel detector.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink GPS Bucky Cart is a manually operated cart with one compartment that
The Radlink GPS Bucky Cart is a manually operated cart with one compartment that is meant for housing and transporting flat panel detectors.
The Radlink GPS Tablet provides surgeons with real-time feedback on orthopedic i
The Radlink GPS Tablet provides surgeons with real-time feedback on orthopedic implant component positioning. Together, the GPS Tablet and its Surgeon’s Checklist software offer easy-to-follow steps designed to address challenges such as component positioning, sizing, limb length and offset restoration. The Radlink GPS Tablet consists of a Tablet PC computer system that uses a touchscreen monitor & other image display accessories. Pre-operative images can be viewed on the GPS Tablet during surgery, which surgeons can use to reference against the intraoperative images captured during the procedure. For posterior approach THA procedures, a flat panel detector (DR panel) is used to capture intraoperative images, which takes approximately four seconds to appear on the GPS Tablet. For anterior approach THA procedures, C-Arm images are instantaneously transferred to the GPS Tablet using the Radlink Wireless C-Arm Kit.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink Galileo Positioning System™ (GPS) provides surgeons with real-time f
The Radlink Galileo Positioning System™ (GPS) provides surgeons with real-time feedback on orthopedic implant component positioning. Together, the GPS and its Surgeon’s Checklist™ software offer easy-to-follow steps designed to address challenges such as component positioning, sizing, limb length and offset restoration. The Radlink GPS consists of a computer system that uses one ultra-wide monitor.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink CR Pro system is a computed radiography system designed for all prim
The Radlink CR Pro system is a computed radiography system designed for all primary diagnostic radiology applications. It is fully automatic and accepts a variety of cassette sizes.The 16-bit sealed fiber-optic laser technology allows images to be erased after each use, prolonging cassette life. The system includes the Radlink PACS that is DICOM compatible with any other PACS/EMR brand. The software provides image quality control and post-processing functions and enables distribution and routing of DICOM images throughout a healthcare network. Existing patient information can be queried by syncing to any EMR/HIS/RIS modality worklist.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink Galileo Positioning System™ (GPS) provides surgeons with real-time f
The Radlink Galileo Positioning System™ (GPS) provides surgeons with real-time feedback on orthopedic implant component positioning. Together, the GPS and its Surgeon’s Checklist™ software offer easy-to-follow steps designed to address challenges such as component positioning, sizing, limb length and offset restoration. The Radlink GPS consists of a computer system that uses two monitors . Pre-operative images can be viewed on the top monitor during surgery at the same time that intraoperative images are being viewed on the lower monitor. For posterior approach THA procedures, a flat panel detector (DR panel) is used to capture intraoperative images, which take approximately four seconds to appear on the lower GPS monitor. For anterior approach THA procedures, C-Arm images are instantaneously transferred to the lower monitor of the GPS.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink GPS Tablet Stand functions as a mobile workstation and charger for t
The Radlink GPS Tablet Stand functions as a mobile workstation and charger for the Radlink GPS Tablet and Wireless C-Arm Kit. The stand can be connected to a mains electricity source and charge both the GPS Tablet and WCA Kit simultaneously. Accessories for both devices can also be housed in the GPS Tablet Stand.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink Picture Archiving and Communication System (PACS) is an external ser
The Radlink Picture Archiving and Communication System (PACS) is an external server for storage and retrieval of varying modality images and their corresponding information.
The Radlink DR Pro system is a digital radiography system with a digital flat pa
The Radlink DR Pro system is a digital radiography system with a digital flat panel detector that captures images from any brand of X-ray generator and displays them on a touch screen monitor within four seconds. A local PACS is available to archive and manage images not only from the DR Pro, but also from other DICOM modalities such as X-ray, MRI, CT, and ultrasound.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
For the wireless mode version of the subject device, combined with an applicatio
For the wireless mode version of the subject device, combined with an application installed on a tablet that can be used in a home environment, the content of the SPM01K4 convenience kit is: 1 electrostimulator SPM01M1 configuration; electrodes; protective skin, and 1 tablet with the MySPM@Home mobile application (SPM01A2).
For the wireless mode version of the subject device, to be used in combination w
For the wireless mode version of the subject device, to be used in combination with an application installed on a tablet, the SPM01K3 convenience kit includes: 1 electrostimulator SPM01M1 configuration; electrodes; protective skin, and 1 tablet with the MySPM mobile application (SPM01A1).
For the wireless mode version of the subject device, to be used in combination w
For the wireless mode version of the subject device, to be used in combination with a dedicated control software running on a pc/laptop, the content of the SPM01K2 convenience kit is: 1 electrostimulator SPM01M2 configuration; electrodes, and protective skin.
For the stand-alone mode version of the subject device, the SPM01K1 convenience
For the stand-alone mode version of the subject device, the SPM01K1 convenience kit includes: 1 electrostimulator SPM01M1 configuration; electrodes, and protective skin.
Optionally, the electrostimulator (SPM01M1) can require the combined use with th
Optionally, the electrostimulator (SPM01M1) can require the combined use with the MySPM@Home mobile application, as accessory of the Subject device. It allows to monitor the user and guide rehabilitation and training through specific protocols.
Optionally, the electrostimulator (SPM01M1) can require the combined use with th
Optionally, the electrostimulator (SPM01M1) can require the combined use with the MySPM mobile application, as accessory of the Subject device. It allows to monitor the user and guide rehabilitation and training through specific protocols.
The configuration is composed of an electrostimulator and other components, usef
The configuration is composed of an electrostimulator and other components, useful for recharging, wearing, stimulating and/or controlling it. The SPM01M2 configuration supports IEEE 802.15.4 radio interface. In this case it provides for the exchange of data between the stimulator and a receiver connected to the PC, which then collects the data sent by the device and synchronizes the transmission. The dedicated control software is supplied via an usb receiver.
The configuration is composed of an electrostimulator and other components, usef
The configuration is composed of an electrostimulator and other components, useful for recharging, wearing, stimulating and/or controlling it.The SPM01M1 configuration supports Bluetooth Low Energy communication. In this case it can connect directly to a smartphone/tablet on which a dedicated app is installed. The dedicated control software is supplied via an usb receiver and must be used by a properly trained healthcare professional.
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting:Wrist, Forearm, Elbow, Shoulder, Hip, Knee, Ankle, Documentation of amputation, ankylosis, and arthrodesis for the above jointsThis product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting.Hand (fingers and thumb) – active and passive, extension and flexion, abduction and adduction, lateral deviations and rotational deformities, calculation of total active motion and total passive motionWrist – active and passive, extension and flexion, radial and ulnar deviationThis product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
A modern microprocessor controlled general purpose amplifier system which is des
A modern microprocessor controlled general purpose amplifier system which is designed to be worn by the subject. The Amplifier (K800) provides a user friendly method for collecting signals from a variety of sensors including goniometers, sEMG and related signals, in a format which may readily be connected to proprietary display and recording systems including A/D cards.This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
DataLINK (DLK900) is an on-line general purpose subject worn programmable Data A
DataLINK (DLK900) is an on-line general purpose subject worn programmable Data Acquisition System allowing the user to collect both analog and digital data from a wide range of wired sensors including Biometrics' Goniometers, Torsiometers, active EMG sensors, Accelerometers, Pinchmeters, Hand Dynamometers and Contact Switches.This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13.
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and associated sensor analysis including real-time data analysis as the data is collected. The Analysis software also contains all of the features of the Management Software: The DataLINK Management Software allows the user to set up the DataLINK communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming dataSoftware is available in English, Chinese, and Japanese.
The DataLINK Management Software allows the user to set up the DataLINK communic
The DataLINK Management Software allows the user to set up the DataLINK communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming data to third party software.Software is available in English, Chinese, and Japanese.
DataLINK (DLK900) is an on-line general purpose subject worn programmable Data A
DataLINK (DLK900) is an on-line general purpose subject worn programmable Data Acquisition System allowing the user to collect both analog and digital data from a wide range of wired sensors including Biometrics' Goniometers, Torsiometers, active EMG sensors, Accelerometers, Pinchmeters, Hand Dynamometers and Contact Switches.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
The DataLOG is the latest in data acquisition technology developed to meet the n
The DataLOG is the latest in data acquisition technology developed to meet the needs of researchers for portable data collection and monitoring in human performance, sports science, medical research, industrial ergonomics, gait laboratories, and educational settings. Includes: 8 channel data acquisition unit, Bluetooth adapter, 6 x Micro SD cards, Card reader, Management Software, instrument caseThis product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and associated sensor analysis including real-time data analysis as the data is collected. The Analysis software also contains all of the features of the Management Software: The DataLOG Management Software allows the user to set up the DataLOG communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming dataSoftware is available in English, Chinese, and Japanese.
The DataLOG Management Software allows the user to set up the DataLOG communicat
The DataLOG Management Software allows the user to set up the DataLOG communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming data to third party software.Software is available in English, Chinese, and Japanese.
The DataLOG is the latest in data acquisition technology developed to meet the n
The DataLOG is the latest in data acquisition technology developed to meet the needs of researchers for portable data collection and monitoring in human performance, sports science, medical research, industrial ergonomics, gait laboratories, and educational settings. Includes: 8 channel data acquisition unit, Bluetooth adapter, 6 x Micro SD cards, Card reader, Management Software, instrument caseThis product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and associated sensor analysis including real-time data analysis as the data is collected. The Analysis software also contains all of the features of the Management Software: The DataLITE Management Software allows the user to set up the DataLITE communications with the computer, configure the DataLITE sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming dataSoftware is available in English, Chinese, and Japanese.
The DataLITE Management Software allows the user to set up the DataLITE communic
The DataLITE Management Software allows the user to set up the DataLITE communications with the computer, configure the DataLITE sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming data to third party software.Software is available in English, Chinese, and Japanese.
Mains powered battery charging unit for up to 8 wireless DataLITE sensors (LE230
Mains powered battery charging unit for up to 8 wireless DataLITE sensors (LE230, W series Goniometers, Z series Torsiometers, AD2, ACL500).Includes Medical Grade Power Supply and country specific mains power cord..This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
A small wireless Dongle (receiver) attached to the USB port of the host PC (Wind
A small wireless Dongle (receiver) attached to the USB port of the host PC (Windows 8 or 10 compatible) can communicate with up to 24 channels of DataLITE sensor inputs via Wi-Fi. When used with a Windows 10 Tablet, the researcher can monitor and analyse data in real-time while the subject has total freedom of movement in laboratory or field studies.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting.The Biometrics Range of Motion Kit (R500) provides precise electronic tools for:upper and lower extremity range of motion measurements
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting:Wrist, Forearm, Elbow, Shoulder, Hip, Knee, Ankle, Documentation of amputation, ankylosis, and arthrodesis for the above jointsThis product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting.Hand (fingers and thumb) – active and passive, extension and flexion, abduction and adduction, lateral deviations and rotational deformities, calculation of total active motion and total passive motionWrist – active and passive, extension and flexion, radial and ulnar deviationThis product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
Sens is an inertial sensor to measure the range of motion and to compare the sym
Sens is an inertial sensor to measure the range of motion and to compare the symmetry between the injured limb’s amplitude andthe healthy limb.
The Radink Sensor uses a combination of a 3-axis accelerometer, a 3-axis gyrosco
The Radink Sensor uses a combination of a 3-axis accelerometer, a 3-axis gyroscope, and a 3-axis magnetometer to locate a patient's body in 3D space. It is calibrated to the patient's original position immediately prior to the surgery so any movement is tracked and the patient can be returned to the original position at any time during or after the surgery.