The Radlink Laser Pro 16 is a film digitization system that follows a three-step
The Radlink Laser Pro 16 is a film digitization system that follows a three-step process of acquiring, selecting, and sending digitized films to any desired destination. A laser beam light source and a sealed optic path are used to scan the film that is driven by a clocked, stepping motor. It utilizes a 12-film auto loader, and its software provides image quality control and post-processing functions and enables distribution and routing of DICOM images through a healthcare network.
The PH GPS Bracket is comprised of Radlink proprietary software and hardware to
The PH GPS Bracket is comprised of Radlink proprietary software and hardware to duplicate Radlink user interface onto Philips reference monitor of the MVS utilizing a switch box that shifts the video signal between Philips and Radlink on the reference monitor. Not only does Radlink solution expand the field of view of Philips C-Arms utilizing Pano function, but it also facilitates intra-operative image analysis by assisting surgeons to evaluate acetabular cup position, limb length discrepancy, and femoral offset during Total Hip Arthroplasty. The PH GPS Bracket comes with software features such as image stitching and Surgeon’s Checklist™ software that provides surgeons with real-time feedback on orthopedic implant component positioning. Pre-operative images can be viewed on the device during surgery, which surgeons can use to reference against the intra-operative images captured during the procedure.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink Cassette is a digital imaging cassette that holds a flat panel detec
The Radlink Cassette is a digital imaging cassette that holds a flat panel detector during x-ray exposure and has a grid to absorb scattered radiation. This model is designed for 14"x17" plates.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink Cassette is a digital imaging cassette that holds a flat panel detec
The Radlink Cassette is a digital imaging cassette that holds a flat panel detector during x-ray exposure and has a grid to absorb scattered radiation.This model is designed for 10"x12" plates.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink Wireless C-Arm (WCA) Kit is an accessory device of the Radlink GPS (
The Radlink Wireless C-Arm (WCA) Kit is an accessory device of the Radlink GPS (Galileo Positioning System) & GPS Tablet that is used to wirelessly send images from a video source such as a C-Arm to the Radlink GPS or GPS Tablet. The Radlink Wireless C-Arm Kit is a computer system that accepts video signals from BNC, VGA, or DVI connections and converts these signals into an image file, which is then sent wirelessly to a Radlink GPS or GPS Tablet.
LMD
System, Digital Image Communications, Radiological
The Radlink DR Tablet Retrofit upgrades any existing portable x-ray machine into
The Radlink DR Tablet Retrofit upgrades any existing portable x-ray machine into a mobile digital radiography system.It is a permanently mounted Tablet PC for image acquisition with built-in PACS and DICOM connectivity. Radlink Pro-Imaging Acquisition and Post-Processing Software are featured on the system as well. It comes with a Cesium wireless flat panel detector.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink GPS Bucky Cart is a manually operated cart with one compartment that
The Radlink GPS Bucky Cart is a manually operated cart with one compartment that is meant for housing and transporting flat panel detectors.
The Radlink GPS Tablet provides surgeons with real-time feedback on orthopedic i
The Radlink GPS Tablet provides surgeons with real-time feedback on orthopedic implant component positioning. Together, the GPS Tablet and its Surgeon’s Checklist software offer easy-to-follow steps designed to address challenges such as component positioning, sizing, limb length and offset restoration. The Radlink GPS Tablet consists of a Tablet PC computer system that uses a touchscreen monitor & other image display accessories. Pre-operative images can be viewed on the GPS Tablet during surgery, which surgeons can use to reference against the intraoperative images captured during the procedure. For posterior approach THA procedures, a flat panel detector (DR panel) is used to capture intraoperative images, which takes approximately four seconds to appear on the GPS Tablet. For anterior approach THA procedures, C-Arm images are instantaneously transferred to the GPS Tablet using the Radlink Wireless C-Arm Kit.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink Galileo Positioning System™ (GPS) provides surgeons with real-time f
The Radlink Galileo Positioning System™ (GPS) provides surgeons with real-time feedback on orthopedic implant component positioning. Together, the GPS and its Surgeon’s Checklist™ software offer easy-to-follow steps designed to address challenges such as component positioning, sizing, limb length and offset restoration. The Radlink GPS consists of a computer system that uses one ultra-wide monitor.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink CR Pro system is a computed radiography system designed for all prim
The Radlink CR Pro system is a computed radiography system designed for all primary diagnostic radiology applications. It is fully automatic and accepts a variety of cassette sizes.The 16-bit sealed fiber-optic laser technology allows images to be erased after each use, prolonging cassette life. The system includes the Radlink PACS that is DICOM compatible with any other PACS/EMR brand. The software provides image quality control and post-processing functions and enables distribution and routing of DICOM images throughout a healthcare network. Existing patient information can be queried by syncing to any EMR/HIS/RIS modality worklist.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink Galileo Positioning System™ (GPS) provides surgeons with real-time f
The Radlink Galileo Positioning System™ (GPS) provides surgeons with real-time feedback on orthopedic implant component positioning. Together, the GPS and its Surgeon’s Checklist™ software offer easy-to-follow steps designed to address challenges such as component positioning, sizing, limb length and offset restoration. The Radlink GPS consists of a computer system that uses two monitors . Pre-operative images can be viewed on the top monitor during surgery at the same time that intraoperative images are being viewed on the lower monitor. For posterior approach THA procedures, a flat panel detector (DR panel) is used to capture intraoperative images, which take approximately four seconds to appear on the lower GPS monitor. For anterior approach THA procedures, C-Arm images are instantaneously transferred to the lower monitor of the GPS.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink GPS Tablet Stand functions as a mobile workstation and charger for t
The Radlink GPS Tablet Stand functions as a mobile workstation and charger for the Radlink GPS Tablet and Wireless C-Arm Kit. The stand can be connected to a mains electricity source and charge both the GPS Tablet and WCA Kit simultaneously. Accessories for both devices can also be housed in the GPS Tablet Stand.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)
The Radlink Picture Archiving and Communication System (PACS) is an external ser
The Radlink Picture Archiving and Communication System (PACS) is an external server for storage and retrieval of varying modality images and their corresponding information.
The Radink Sensor uses a combination of a 3-axis accelerometer, a 3-axis gyrosco
The Radink Sensor uses a combination of a 3-axis accelerometer, a 3-axis gyroscope, and a 3-axis magnetometer to locate a patient's body in 3D space. It is calibrated to the patient's original position immediately prior to the surgery so any movement is tracked and the patient can be returned to the original position at any time during or after the surgery.
The Radlink DR Pro system is a digital radiography system with a digital flat pa
The Radlink DR Pro system is a digital radiography system with a digital flat panel detector that captures images from any brand of X-ray generator and displays them on a touch screen monitor within four seconds. A local PACS is available to archive and manage images not only from the DR Pro, but also from other DICOM modalities such as X-ray, MRI, CT, and ultrasound.
MQB
Solid State X-Ray Imager (Flat Panel/Digital Imager)