The SIRIUS MRI Marker NS is a component device indicated as an accessory for use
The SIRIUS MRI Marker NS is a component device indicated as an accessory for use in conjunction with brachytherapy seed carrier sleeves and radionuclide brachytherapy sources containing one of the following isotopes: Iodine 125 (125I), Palladium 103 (103Pd) or Cesium 131 (131Cs). It is indicated for permanent interstitial implantation in the prostate of patients with confirmed prostatic malignancy.
The Fiducial Marker consists of a sealed polyether ether ketone (PEEK) polymer c
The Fiducial Marker consists of a sealed polyether ether ketone (PEEK) polymer capsule containing a solution of up to 1.0% cobalt chloride and up to 2.0% N-Acetyl cysteine, in a ratio of 1:2. Zirconium oxide is sealed within the device. The length of the polymer capsule is between 5.5 mm and 10.0 mm, and the diameter is 1.0 mm. It is loaded in an implant needle and sterilized with Ethylene Oxide.
The Fiducial Marker consists of a sealed polyether ether ketone (PEEK) polymer c
The Fiducial Marker consists of a sealed polyether ether ketone (PEEK) polymer capsule containing a solution of up to 1.0% cobalt chloride and up to 2.0% N-Acetyl cysteine, in a ratio of 1:2. Zirconium oxide is sealed within the device. The length of the polymer capsule is between 5.5 mm and 10.0 mm, and the diameter is between 0.9 mm and 1.2 mm.
The HDR MRI Lumen Marker is a sealed high-density polyethylene (HDPE) tube conta
The HDR MRI Lumen Marker is a sealed high-density polyethylene (HDPE) tube containing a cobalt chloride N-Acetylcysteine saline solution. The HDPE tube is up to 350.0 mm in length and 1.0 mm in diameter, with the distal 19.0 mm of the tube accommodating a HDPE sealing plug. The distal end of the device is provided with an attached HDPE end-cap for handling. This end cap is approximately 3.0 mm in length. The HDR MRI Lumen Marker is an accessory to remote controlled high dose rate (HDR) radionuclide applicator systems and facilitates the identification of lumens within MRI compatible HDR brachytherapy applicators.
The SIRIUS MRI Marker is a component device indicated as an accessory for use in
The SIRIUS MRI Marker is a component device indicated as an accessory for use in conjunction with brachytherapy seed carrier sleeves and radionuclide brachytherapy sources containing one of the following isotopes: Iodine 125 (125I), Palladium 103 (103Pd) or Cesium 131 (131Cs). It is indicated for permanent interstitial implantation in the prostate of patients with confirmed prostatic malignancy.
Non-sterile IODINE—125 source for use with seedSelectron® for system calibration
Non-sterile IODINE—125 source for use with seedSelectron® for system calibration. Not for human use.
2 - 1.10mm x 0.50cm VISICOIL separated by 20mm PGLA spacer (Stranded with PGLA S
2 - 1.10mm x 0.50cm VISICOIL separated by 20mm PGLA spacer (Stranded with PGLA Sleeve) loaded in an 17 gauge pre-waxed brachytherapy needle 20cm in length.
2 - 1.10mm x 0.50cm VISICOIL separated by a 15mm PGLA spacer (Stranded with PGLA
2 - 1.10mm x 0.50cm VISICOIL separated by a 15mm PGLA spacer (Stranded with PGLA Sleeve) loaded in an 17 gauge pre-waxed brachytherapy needle 20cm in length.
2 - 0.75mm x 0.50cm VISICOIL separated by 20mm PGLA spacer (Stranded with PGLA S
2 - 0.75mm x 0.50cm VISICOIL separated by 20mm PGLA spacer (Stranded with PGLA Sleeve) loaded in an 18 gauge pre-waxed brachytherapy needle 12cm in length.
2 - 0.75mm x 0.50cm VISICOIL separated by 20mm PGLA spacer (Stranded with PGLA S
2 - 0.75mm x 0.50cm VISICOIL separated by 20mm PGLA spacer (Stranded with PGLA Sleeve) loaded in an 18 gauge pre-waxed brachytherapy needle 20cm in length.
2 - 0.75mm x 0.50cm VISICOIL separated by 15mm PGLA spacer (Stranded with PGLA S
2 - 0.75mm x 0.50cm VISICOIL separated by 15mm PGLA spacer (Stranded with PGLA Sleeve) loaded in an 18 gauge pre-waxed brachytherapy needle 12cm in length.
2 - 0.75mm x 0.50cm VISICOIL separated by a 15mm PGLA Spacer (Stranded with PGLA
2 - 0.75mm x 0.50cm VISICOIL separated by a 15mm PGLA Spacer (Stranded with PGLA Sleeve) loaded in an 18 gauge pre-waxed brachytherapy needle 20cm in length.
2 - 1.10mm x 0.50cm VISICOIL separated by a 20mm PGLA spacer (Non-Stranded) load
2 - 1.10mm x 0.50cm VISICOIL separated by a 20mm PGLA spacer (Non-Stranded) loaded in an 17 gauge pre-waxed brachytherapy needle 20cm in length.
2 - 1.10mm x 0.50cm VISICOIL separated by a 15mm PGLA spacer (Non-Stranded) load
2 - 1.10mm x 0.50cm VISICOIL separated by a 15mm PGLA spacer (Non-Stranded) loaded in an 17 gauge pre-waxed brachytherapy needle 20cm in length.
2 - 0.75mm x 0.50cm VISICOIL separated by a 20mm PGLA spacer (Non-Stranded) load
2 - 0.75mm x 0.50cm VISICOIL separated by a 20mm PGLA spacer (Non-Stranded) loaded in an 18 gauge pre-waxed brachytherapy needle 12cm in length.
2 - 0.75mm x 0.50cm VISICOIL separated by a 20mm PGLA spacer (Non-Stranded) load
2 - 0.75mm x 0.50cm VISICOIL separated by a 20mm PGLA spacer (Non-Stranded) loaded in an 18 gauge pre-waxed brachytherapy needle 20cm in length.