The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Lafayette Hand-Held Dynamometer is an ergonomic hand-held device for objecti
The Lafayette Hand-Held Dynamometer is an ergonomic hand-held device for objectively quantifying muscle strength. The device comes in an ergonomic plastic housing that fits comfortably in the palm of the hand. An elastic strap helps keep the HHD in place. The device has a LCD screen for data readout and menus for setup. The patient pushes on a stirrup accessory which is attached to the shaft of a force measuring load cell. The load cell senses the amount of force being applied to the device by the patient and this load is displayed in the LCD in pounds, kilograms or newtons. An optional test stand accessory and holder are used to position the HHD for the test.
The Lafayette Extendable Goniometer is an angle measurement device used for accu
The Lafayette Extendable Goniometer is an angle measurement device used for accurate, versatile, reliable and objective assessment of range of motion. The Extendable Goniometer features a dual scale, 1° increments, extendable and retractable arms, magnified reading window, as well as a compact, lightweight, and portable design. Its arms can extend to 28.00 inches to measure large joints and retract to 8.0 inches to measure all but the smallest joints. Unlike standard goniometers that require the examiner to estimate alignment, the length of the extendable arms allows it to lie over anatomical bony landmarks. The dual scale of 0-180° and 180-0° is magnified four times, improving the accuracy of the reading, thus, reducing the chance for error. Its lightweight ABS plastic construction will ensure continued and long lasting use.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions. The Stainless Steel Short Finger Goniometer is used for easy range-of-motion measurements of metacarpal, phalangeal, and interphalangeal joints. There are linear inch and centimeter markings on both sides of the protractors, in opposite directions. The protractors measure 0-150° in 5° increments. Stainless steel. Latex free. Clearly marked numbers make measuring easy. Measures 5.75 inches long.
The Large Bone Caliper accurately measures distance in cm. It features a fixed
The Large Bone Caliper accurately measures distance in cm. It features a fixed arm and a measurement arm that slides along a scale. The scale indicates the distance between the two arms. Calipers are used to measure body characteristics such as abdominal diameter, wrist, elbow and knee widths, muscle mass, shoulder and chest width, etc. The measurements are accurate to 1mm.
The Lafayette Hand-Held Dynamometer is an ergonomic hand-held device for objecti
The Lafayette Hand-Held Dynamometer is an ergonomic hand-held device for objectively quantifying muscle strength. The device comes in an ergonomic plastic housing that fits comfortably in the palm of the hand. An elastic strap helps keep the HHD in place. The device has a LCD screen for data readout and menus for setup. The patient pushes on a stirrup accessory which is attached to the shaft of a force measuring load cell. The load cell senses the amount of force being applied to the device by the patient and this load is displayed in the LCD in pounds, kilograms or newtons. An optional test stand accessory and holder are used to position the HHD for the test.
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Abdominal Calipers accurately measure distance in cm. They feature a fixed
The Abdominal Calipers accurately measure distance in cm. They feature a fixed arm and a measurement arm that slides along a scale. The scale indicates the distance between the two arms. Calipers are used to measure body characteristics such as abdominal diameter, muscle mass, shoulder and chest width, etc. The measurements are accurate to 1mm.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions. The Stainless Steel Short Finger Goniometer is used for easy range-of-motion measurements of metacarpal, phalangeal, and interphalangeal joints. There are linear inch and centimeter markings on both sides of the protractors, in opposite directions. The protractors measure 0-150° in 5° increments. Stainless steel. Latex free. Clearly marked numbers make measuring easy. Measures 5.75 inches long.
The Small Bone Caliper accurately measures distance in cm. It features a fixed
The Small Bone Caliper accurately measures distance in cm. It features a fixed arm and a measurement arm that slides along a scale. The scale indicates the distance between the two arms. Calipers are used to measure body characteristics such as abdominal diameter, wrist, elbow and knee widths, muscle mass, shoulder and chest width, etc. The measurements are accurate to 1mm.
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Chest Depth Caliper accurately measures chest depth in inches or centimeters
The Chest Depth Caliper accurately measures chest depth in inches or centimeters. Popular uses include measuring maximum chest expansion from resting to full inspiration. Range is from 0 to 24 inches in 0.50 inch graduations (0 to 60 cm with 2.0 cm graduations).
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Lafayette Skinfold Caliper is an easy to use device for objective assessment
The Lafayette Skinfold Caliper is an easy to use device for objective assessment of body fat composition. The device features a 0-100mm scale that allows an accurate assessment of a larger portion of the population than other calipers. The spring-loaded arms and pivoting tips adjust automatically for parallel measurement of skinfolds, and the circular tips provide comfort to the patient. The tension spring provides constant pressure over the entire operating range, meeting the pressure requirements of 10g/mm2. The caliper is lightweight, durable, and never needs calibration.
The Algometer provides pain diagnostic testing with digital clarity and computer
The Algometer provides pain diagnostic testing with digital clarity and computer interface for data logging. The AlgoMed Computerized Pressure Algometry is an Algometry device including advanced software package designed for clinical use and advance research in the field of Pain Management.The AlgoMed enables the user to perform various pressure test paradigms including the method of limits and the ramp and hold method. These test paradigms can be utilized for a wide range of pressure pain measures such as pressure pain threshold and tolerance, temporal summation, DNIC and more. The device can also evaluate disease or treatment progress over time.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s physical strength. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s physical strength. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s physical strength. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s pressure threshold and pain tolerance. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s physical strength. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s physical strength. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s physical strength. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s physical strength. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s pressure threshold and pain tolerance. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s physical strength. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s physical strength. The device is intended to be non-invasive, non-surgical and transient.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions. The Stainless Steel Short Finger Goniometer is used for easy range-of-motion measurements of metacarpal, phalangeal, and interphalangeal joints. There are linear inch and centimeter markings on both sides of the protractors, in opposite directions. The protractors measure 0-150° in 5° increments. Stainless steel. Latex free. Clearly marked numbers make measuring easy. Measures 5.75 inches long.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions. The Stainless Steel Short Finger Goniometer is used for easy range-of-motion measurements of metacarpal, phalangeal, and interphalangeal joints. There are linear inch and centimeter markings on both sides of the protractors, in opposite directions. The protractors measure 0-150° in 5° increments. Stainless steel. Latex free. Clearly marked numbers make measuring easy. Measures 5.75 inches long.