The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Lafayette Hand-Held Dynamometer is an ergonomic hand-held device for objecti
The Lafayette Hand-Held Dynamometer is an ergonomic hand-held device for objectively quantifying muscle strength. The device comes in an ergonomic plastic housing that fits comfortably in the palm of the hand. An elastic strap helps keep the HHD in place. The device has a LCD screen for data readout and menus for setup. The patient pushes on a stirrup accessory which is attached to the shaft of a force measuring load cell. The load cell senses the amount of force being applied to the device by the patient and this load is displayed in the LCD in pounds, kilograms or newtons. An optional test stand accessory and holder are used to position the HHD for the test.
The Lafayette Extendable Goniometer is an angle measurement device used for accu
The Lafayette Extendable Goniometer is an angle measurement device used for accurate, versatile, reliable and objective assessment of range of motion. The Extendable Goniometer features a dual scale, 1° increments, extendable and retractable arms, magnified reading window, as well as a compact, lightweight, and portable design. Its arms can extend to 28.00 inches to measure large joints and retract to 8.0 inches to measure all but the smallest joints. Unlike standard goniometers that require the examiner to estimate alignment, the length of the extendable arms allows it to lie over anatomical bony landmarks. The dual scale of 0-180° and 180-0° is magnified four times, improving the accuracy of the reading, thus, reducing the chance for error. Its lightweight ABS plastic construction will ensure continued and long lasting use.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions. The Stainless Steel Short Finger Goniometer is used for easy range-of-motion measurements of metacarpal, phalangeal, and interphalangeal joints. There are linear inch and centimeter markings on both sides of the protractors, in opposite directions. The protractors measure 0-150° in 5° increments. Stainless steel. Latex free. Clearly marked numbers make measuring easy. Measures 5.75 inches long.
The Large Bone Caliper accurately measures distance in cm. It features a fixed
The Large Bone Caliper accurately measures distance in cm. It features a fixed arm and a measurement arm that slides along a scale. The scale indicates the distance between the two arms. Calipers are used to measure body characteristics such as abdominal diameter, wrist, elbow and knee widths, muscle mass, shoulder and chest width, etc. The measurements are accurate to 1mm.
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Abdominal Calipers accurately measure distance in cm. They feature a fixed
The Abdominal Calipers accurately measure distance in cm. They feature a fixed arm and a measurement arm that slides along a scale. The scale indicates the distance between the two arms. Calipers are used to measure body characteristics such as abdominal diameter, muscle mass, shoulder and chest width, etc. The measurements are accurate to 1mm.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions. The Stainless Steel Short Finger Goniometer is used for easy range-of-motion measurements of metacarpal, phalangeal, and interphalangeal joints. There are linear inch and centimeter markings on both sides of the protractors, in opposite directions. The protractors measure 0-150° in 5° increments. Stainless steel. Latex free. Clearly marked numbers make measuring easy. Measures 5.75 inches long.
The Small Bone Caliper accurately measures distance in cm. It features a fixed
The Small Bone Caliper accurately measures distance in cm. It features a fixed arm and a measurement arm that slides along a scale. The scale indicates the distance between the two arms. Calipers are used to measure body characteristics such as abdominal diameter, wrist, elbow and knee widths, muscle mass, shoulder and chest width, etc. The measurements are accurate to 1mm.
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Chest Depth Caliper accurately measures chest depth in inches or centimeters
The Chest Depth Caliper accurately measures chest depth in inches or centimeters. Popular uses include measuring maximum chest expansion from resting to full inspiration. Range is from 0 to 24 inches in 0.50 inch graduations (0 to 60 cm with 2.0 cm graduations).
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber
The Non-Metallic Pneumos consist of two plastic end pieces connected by a rubber convoluted tube. The pieces are also connected internally by a rubber band. A connecting tube of various lengths is attached to the pneumograph assembly. These tube lengths can be 7, 10, 12, or 14 feet or 89 inches depending on customer specifications. The entire assembly is non-metallic so that that it can be used safely in an MRI environment. The Pneumograph is used as respiration sensor. The convoluted tube is attached around the upper or lower torso of the patient and is held in place with a Velcro strap. As the patient breathes, the tube expands and contracts which varies the pressure inside the tube in direct correlation to the breathing pattern. When attached to a pressure sensor, the breathing pattern of the patient can be sensed and recorded. The pneumograph is used as a gating sensor for MRI machines to sense the patient’s breathing pattern. The image acquisition of the MRI is triggered at the bottom of the patient’s breathing cycle when there is minimal movement of the chest cavity.
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru
The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions.
The Lafayette Skinfold Caliper is an easy to use device for objective assessment
The Lafayette Skinfold Caliper is an easy to use device for objective assessment of body fat composition. The device features a 0-100mm scale that allows an accurate assessment of a larger portion of the population than other calipers. The spring-loaded arms and pivoting tips adjust automatically for parallel measurement of skinfolds, and the circular tips provide comfort to the patient. The tension spring provides constant pressure over the entire operating range, meeting the pressure requirements of 10g/mm2. The caliper is lightweight, durable, and never needs calibration.
Now you can have all of these capabilities in one compact system. Surface EMG, r
Now you can have all of these capabilities in one compact system. Surface EMG, rangeof motion and muscle testing – may be purchased separately or in any combination. The modulardesign of the MES 9000 allows you to purchase any combination of modules and expand as yourpractice grows. The MES 9000 --- the modular system that enables you to do a complete, integratedevaluation with objective documentation that supports your diagnosis.
By using sophisticated sensors within the inclinometers, the Dynamic ROM system
By using sophisticated sensors within the inclinometers, the Dynamic ROM system records the patient's entire ROM through the plane of movement and displays it in a graphical representation on the computer screen. Unlike other systems which simply give you a static endpoint measurement of ROM, Dynamic ROM captures the entire movement. The figure to your left shows a typical Dynamic ROM recording of the dynamic motion of the spine during three repetitions of lumbar flexion and extension. The numbers correspond with the figure to the left showing the patient's motions.The inclinometers are attached to straps placed over T12 and S1. The recording of the sensor at S1 is subtracted from the recording at T12 to produce the DIFFerential recording graph which represents the true motion of the patient's lumbar during lumbar flexion and extension motion. The flattened DIFF tracing line on each repetition during end-point indicates that both sensors are moving at the same rate of speed, and that the lumbar lordosis stopped unfolding before the end-point of trunk flexion had been reached. With this information the clinician can observe and assess the quality and the pattern of the patient's motion as well as the quantity of the ROM. Dynamic Range of Motion from Noromed elevates range of motion testing from a simple measurement tool to a true diagnostic tool.
Movement Suite is a wireless medical device that measures, records, and reports
Movement Suite is a wireless medical device that measures, records, and reports movements and muscle activity of the lowerback / lumbar spine. The system also measures range of motion in the sagittal and coronal anatomical planes.
Professional Suite is a wireless medical device that measures, records, and repo
Professional Suite is a wireless medical device that measures, records, and reports movements and muscle activity of the lowerback / lumbar spine. The system also measures range of motion in the sagittal and coronal anatomical planes.
For the wireless mode version of the subject device, combined with an applicatio
For the wireless mode version of the subject device, combined with an application installed on a tablet that can be used in a home environment, the content of the SPM01K4 convenience kit is: 1 electrostimulator SPM01M1 configuration; electrodes; protective skin, and 1 tablet with the MySPM@Home mobile application (SPM01A2).
For the wireless mode version of the subject device, to be used in combination w
For the wireless mode version of the subject device, to be used in combination with an application installed on a tablet, the SPM01K3 convenience kit includes: 1 electrostimulator SPM01M1 configuration; electrodes; protective skin, and 1 tablet with the MySPM mobile application (SPM01A1).
For the wireless mode version of the subject device, to be used in combination w
For the wireless mode version of the subject device, to be used in combination with a dedicated control software running on a pc/laptop, the content of the SPM01K2 convenience kit is: 1 electrostimulator SPM01M2 configuration; electrodes, and protective skin.
For the stand-alone mode version of the subject device, the SPM01K1 convenience
For the stand-alone mode version of the subject device, the SPM01K1 convenience kit includes: 1 electrostimulator SPM01M1 configuration; electrodes, and protective skin.
Optionally, the electrostimulator (SPM01M1) can require the combined use with th
Optionally, the electrostimulator (SPM01M1) can require the combined use with the MySPM@Home mobile application, as accessory of the Subject device. It allows to monitor the user and guide rehabilitation and training through specific protocols.
Optionally, the electrostimulator (SPM01M1) can require the combined use with th
Optionally, the electrostimulator (SPM01M1) can require the combined use with the MySPM mobile application, as accessory of the Subject device. It allows to monitor the user and guide rehabilitation and training through specific protocols.
The configuration is composed of an electrostimulator and other components, usef
The configuration is composed of an electrostimulator and other components, useful for recharging, wearing, stimulating and/or controlling it. The SPM01M2 configuration supports IEEE 802.15.4 radio interface. In this case it provides for the exchange of data between the stimulator and a receiver connected to the PC, which then collects the data sent by the device and synchronizes the transmission. The dedicated control software is supplied via an usb receiver.
The configuration is composed of an electrostimulator and other components, usef
The configuration is composed of an electrostimulator and other components, useful for recharging, wearing, stimulating and/or controlling it.The SPM01M1 configuration supports Bluetooth Low Energy communication. In this case it can connect directly to a smartphone/tablet on which a dedicated app is installed. The dedicated control software is supplied via an usb receiver and must be used by a properly trained healthcare professional.
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting:Wrist, Forearm, Elbow, Shoulder, Hip, Knee, Ankle, Documentation of amputation, ankylosis, and arthrodesis for the above jointsThis product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting.Hand (fingers and thumb) – active and passive, extension and flexion, abduction and adduction, lateral deviations and rotational deformities, calculation of total active motion and total passive motionWrist – active and passive, extension and flexion, radial and ulnar deviationThis product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
A modern microprocessor controlled general purpose amplifier system which is des
A modern microprocessor controlled general purpose amplifier system which is designed to be worn by the subject. The Amplifier (K800) provides a user friendly method for collecting signals from a variety of sensors including goniometers, sEMG and related signals, in a format which may readily be connected to proprietary display and recording systems including A/D cards.This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
DataLINK (DLK900) is an on-line general purpose subject worn programmable Data A
DataLINK (DLK900) is an on-line general purpose subject worn programmable Data Acquisition System allowing the user to collect both analog and digital data from a wide range of wired sensors including Biometrics' Goniometers, Torsiometers, active EMG sensors, Accelerometers, Pinchmeters, Hand Dynamometers and Contact Switches.This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13.
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and associated sensor analysis including real-time data analysis as the data is collected. The Analysis software also contains all of the features of the Management Software: The DataLINK Management Software allows the user to set up the DataLINK communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming dataSoftware is available in English, Chinese, and Japanese.
The DataLINK Management Software allows the user to set up the DataLINK communic
The DataLINK Management Software allows the user to set up the DataLINK communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming data to third party software.Software is available in English, Chinese, and Japanese.
DataLINK (DLK900) is an on-line general purpose subject worn programmable Data A
DataLINK (DLK900) is an on-line general purpose subject worn programmable Data Acquisition System allowing the user to collect both analog and digital data from a wide range of wired sensors including Biometrics' Goniometers, Torsiometers, active EMG sensors, Accelerometers, Pinchmeters, Hand Dynamometers and Contact Switches.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
The DataLOG is the latest in data acquisition technology developed to meet the n
The DataLOG is the latest in data acquisition technology developed to meet the needs of researchers for portable data collection and monitoring in human performance, sports science, medical research, industrial ergonomics, gait laboratories, and educational settings. Includes: 8 channel data acquisition unit, Bluetooth adapter, 6 x Micro SD cards, Card reader, Management Software, instrument caseThis product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and associated sensor analysis including real-time data analysis as the data is collected. The Analysis software also contains all of the features of the Management Software: The DataLOG Management Software allows the user to set up the DataLOG communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming dataSoftware is available in English, Chinese, and Japanese.
The DataLOG Management Software allows the user to set up the DataLOG communicat
The DataLOG Management Software allows the user to set up the DataLOG communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming data to third party software.Software is available in English, Chinese, and Japanese.
The DataLOG is the latest in data acquisition technology developed to meet the n
The DataLOG is the latest in data acquisition technology developed to meet the needs of researchers for portable data collection and monitoring in human performance, sports science, medical research, industrial ergonomics, gait laboratories, and educational settings. Includes: 8 channel data acquisition unit, Bluetooth adapter, 6 x Micro SD cards, Card reader, Management Software, instrument caseThis product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and
The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and associated sensor analysis including real-time data analysis as the data is collected. The Analysis software also contains all of the features of the Management Software: The DataLITE Management Software allows the user to set up the DataLITE communications with the computer, configure the DataLITE sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming dataSoftware is available in English, Chinese, and Japanese.
The DataLITE Management Software allows the user to set up the DataLITE communic
The DataLITE Management Software allows the user to set up the DataLITE communications with the computer, configure the DataLITE sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming data to third party software.Software is available in English, Chinese, and Japanese.
Mains powered battery charging unit for up to 8 wireless DataLITE sensors (LE230
Mains powered battery charging unit for up to 8 wireless DataLITE sensors (LE230, W series Goniometers, Z series Torsiometers, AD2, ACL500).Includes Medical Grade Power Supply and country specific mains power cord..This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
A small wireless Dongle (receiver) attached to the USB port of the host PC (Wind
A small wireless Dongle (receiver) attached to the USB port of the host PC (Windows 8 or 10 compatible) can communicate with up to 24 channels of DataLITE sensor inputs via Wi-Fi. When used with a Windows 10 Tablet, the researcher can monitor and analyse data in real-time while the subject has total freedom of movement in laboratory or field studies.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting.The Biometrics Range of Motion Kit (R500) provides precise electronic tools for:upper and lower extremity range of motion measurements
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting:Wrist, Forearm, Elbow, Shoulder, Hip, Knee, Ankle, Documentation of amputation, ankylosis, and arthrodesis for the above jointsThis product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
Accurate measurements of upper and lower extremity ROM with precise electronic t
Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting.Hand (fingers and thumb) – active and passive, extension and flexion, abduction and adduction, lateral deviations and rotational deformities, calculation of total active motion and total passive motionWrist – active and passive, extension and flexion, radial and ulnar deviationThis product is independently tested and certified to BS EN 60601-1:2006 + A1:2013
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
A device to assist the clinician with establishing an objective assessment of a
A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.
Sens is an inertial sensor to measure the range of motion and to compare the sym
Sens is an inertial sensor to measure the range of motion and to compare the symmetry between the injured limb’s amplitude andthe healthy limb.
The Radink Sensor uses a combination of a 3-axis accelerometer, a 3-axis gyrosco
The Radink Sensor uses a combination of a 3-axis accelerometer, a 3-axis gyroscope, and a 3-axis magnetometer to locate a patient's body in 3D space. It is calibrated to the patient's original position immediately prior to the surgery so any movement is tracked and the patient can be returned to the original position at any time during or after the surgery.