"PowerLook Density Assessment 3.4 is a software application intended for use wit
"PowerLook Density Assessment 3.4 is a software application intended for use with DBT 2D images from tomosynthesis exams. PowerLook Density Assessment 3.4 provides a BI-RADS 5th Edition breast density category to aid health care professionals in the assessment of breast tissue composition. PowerLook Density Assessment 3.4 produces adjunctive information. It is not a diagnostic aid.
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended to identify and mark regions of interest on screening and diagnostic mammograms from full-field digital mammography (FFDM) systems to bring them to the attention of the radiologist after an initial reading has been completed. Thus the system prompts the radiologist to areas on mammograms for second review only.
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended to identify and mark regions of interest on screening and diagnostic mammograms from full-field digital mammography (FFDM) systems to bring them to the attention of the radiologist after an initial reading has been completed. Thus the system prompts the radiologist to areas on mammograms for second review only.
The iCAD PowerLook® Tomo Detection Software is a computer-assisted detection (CA
The iCAD PowerLook® Tomo Detection Software is a computer-assisted detection (CAD) software device intended to be used concurrently by radiologists while reading GE digital breast tomosynthesis exams. The system detects up to five soft tissue densities (masses, architectural distortions and asymmetries) in the 3D tomosynthesis images. The detections are blended with the standard 2D synthetic image and the CAD-enhanced 2D synthetic image is viewed on a mammography review workstation. The CAD-enhanced 2D synthetic image assists radiologists in identifying densities (masses, architectural distortions and asymmetries) that may be confirmed or dismissed by the radiologist in the digital breast tomosynthesis (DBT) images.
The iCAD PowerLook® Tomo Detection Software is a computer-assisted detection (CA
The iCAD PowerLook® Tomo Detection Software is a computer-assisted detection (CAD) software device intended to be used concurrently by radiologists while reading GE digital breast tomosynthesis exams. The system detects up to five soft tissue densities (masses, architectural distortions and asymmetries) in the 3D tomosynthesis images. The detections are blended with the standard 2D synthetic image and the CAD-enhanced 2D synthetic image is viewed on a mammography review workstation. The CAD-enhanced 2D synthetic image assists radiologists in identifying densities (masses, architectural distortions and asymmetries) that may be confirmed or dismissed by the radiologist in the digital breast tomosynthesis (DBT) images.
The iCAD PowerLook® Tomo Detection Software is a computer-assisted detection (CA
The iCAD PowerLook® Tomo Detection Software is a computer-assisted detection (CAD) software device intended to be used concurrently by radiologists while reading GE digital breast tomosynthesis exams. The system detects up to five soft tissue densities (masses, architectural distortions and asymmetries) in the 3D tomosynthesis images. The detections are blended with the standard 2D synthetic image and the CAD-enhanced 2D synthetic image is viewed on a mammography review workstation. The CAD-enhanced 2D synthetic image assists radiologists in identifying densities (masses, architectural distortions and asymmetries) that may be confirmed or dismissed by the radiologist in the digital breast tomosynthesis (DBT) images.
PowerLook Density Assessment is a software application intended for use with dig
PowerLook Density Assessment is a software application intended for use with digital mammographysystems. PowerLook Density Assessment calculates breast density as a ratio of fibroglandular tissue andtotal breast area estimates. PowerLook Density Assessment provides these numerical values for eachbreast as well as a density category to aid radiologists in the assessment of breast tissuecomposition. PowerLook Density Assessment produces adjunctive information. It is not an interpretive ordiagnostic aid.
Radiological Computer Assisted Detection/Diagnosis Software For Lesions Suspicio
Radiological Computer Assisted Detection/Diagnosis Software For Lesions Suspicious For Cancer
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended to identify and mark regions of interest on screening and diagnostic mammograms from full-field digital mammography (FFDM) systems to bring them to the attention of the radiologist after an initial reading has been completed. Thus the system prompts the radiologist to areas on mammograms for second review only.
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended to identify and mark regions of interest on screening and diagnostic mammograms from full-field digital mammography (FFDM) systems to bring them to the attention of the radiologist after an initial reading has been completed. Thus the system prompts the radiologist to areas on mammograms for second review only.
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended to identify and mark regions of interest on screening and diagnostic mammograms from full-field digital mammography (FFDM) systems to bring them to the attention of the radiologist after an initial reading has been completed. Thus the system prompts the radiologist to areas on mammograms for second review only.
The iCAD PowerLook® Tomo Detection Software is a computer-assisted detection (CA
The iCAD PowerLook® Tomo Detection Software is a computer-assisted detection (CAD) software device intended to be used concurrently by radiologists while reading GE digital breast tomosynthesis exams. The system detects up to five soft tissue densities (masses, architectural distortions and asymmetries) in the 3D tomosynthesis images. The detections are blended with the standard 2D synthetic image and the CAD-enhanced 2D synthetic image is viewed on a mammography review workstation. The CAD-enhanced 2D synthetic image assists radiologists in identifying densities (masses, architectural distortions and asymmetries) that may be confirmed or dismissed by the radiologist in the digital breast tomosynthesis (DBT) images.
The iCAD PowerLook® Tomo Detection Software is a computer-assisted detection (CA
The iCAD PowerLook® Tomo Detection Software is a computer-assisted detection (CAD) software device intended to be used concurrently by radiologists while reading GE digital breast tomosynthesis exams. The system detects up to five soft tissue densities (masses, architectural distortions and asymmetries) in the 3D tomosynthesis images. The detections are blended with the standard 2D synthetic image and the CAD-enhanced 2D synthetic image is viewed on a mammography review workstation. The CAD-enhanced 2D synthetic image assists radiologists in identifying densities (masses, architectural distortions and asymmetries) that may be confirmed or dismissed by the radiologist in the digital breast tomosynthesis (DBT) images.
Radiological Computer Assisted Detection/Diagnosis Software For Lesions Suspicio
Radiological Computer Assisted Detection/Diagnosis Software For Lesions Suspicious For Cancer
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended to identify and mark regions of interest on screening and diagnostic mammograms from full-field digital mammography (FFDM) systems to bring them to the attention of the radiologist after an initial reading has been completed. Thus the system prompts the radiologist to areas on mammograms for second review only.
The iCAD PowerLook® Tomo Detection Software is a computer-assisted detection (CA
The iCAD PowerLook® Tomo Detection Software is a computer-assisted detection (CAD) software device intended to be used concurrently by radiologists while reading GE digital breast tomosynthesis exams. The system detects up to five soft tissue densities (masses, architectural distortions and asymmetries) in the 3D tomosynthesis images. The detections are blended with the standard 2D synthetic image and the CAD-enhanced 2D synthetic image is viewed on a mammography review workstation. The CAD-enhanced 2D synthetic image assists radiologists in identifying densities (masses, architectural distortions and asymmetries) that may be confirmed or dismissed by the radiologist in the digital breast tomosynthesis (DBT) images.
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended
The SecondLook Computer-Aided Detection (CAD) system for mammography is intended to identify and mark regions of interest on screening and diagnostic mammograms from full-field digital mammography (FFDM) systems to bring them to the attention of the radiologist after an initial reading has been completed. Thus the system prompts the radiologist to areas on mammograms for second review only.Field Replacement System
OPSInsight™ is intended for use as preoperative surgical planning software to ai
OPSInsight™ is intended for use as preoperative surgical planning software to aid orthopaedic surgeons in component selection, sizing and placement for primary total hip arthroplasty.
The Knee OsteoArthritis Labeling Assistant (KOALA) software provides metric meas
The Knee OsteoArthritis Labeling Assistant (KOALA) software provides metric measurements of the joint space width and indicators for presence or absence of radiographic features of osteoarthritis (OA) on posterior-anterior or anterior-posterior (PA/AP) knee X-ray images. The outputs aid clinical professionals who are interested in the analysis of knee OA in adult patients, either suffering from knee OA or having an elevated risk of developing the disease. Outputs are summarized in a KOALA report that can be viewed on any FDA approved DICOM viewer workstation. KOALA operates in a Linux environment and can be deployed to be compatible with any operating system supporting the third-party software Docker. The integration environment has to support KOALA data input and output requirements. The device does not interact with the patient directly, nor does it control any life-sustaining devices.
The Knee OsteoArthritis Labeling Assistant (KOALA) software provides metric meas
The Knee OsteoArthritis Labeling Assistant (KOALA) software provides metric measurements of the joint space width and indicators for presence or absence of radiographic features of osteoarthritis (OA) on posterior-anterior or anterior-posterior (PA/AP) knee X-ray images. The outputs aid clinical professionals who are interested in the analysis of knee OA in adult patients, either suffering from knee OA or having an elevated risk of developing the disease. Outputs are summarized in a KOALA report that can be viewed on any FDA approved DICOM viewer workstation. KOALA operates in a Linux environment and can be deployed to be compatible with any operating system supporting the third-party software Docker. The integration environment has to support KOALA data input and output requirements. The device does not interact with the patient directly, nor does it control any life-sustaining devices.
QuantorView is an image viewing software dedicated DICOM images produced by imag
QuantorView is an image viewing software dedicated DICOM images produced by imaging equipment (CR, DR, CT, MRI, Ultrasound and etc). QuantorView is a high quality viewing software responsible for displaying PACS image data. It enables physicians to provide medical services by accessing image data and patient information from remote locations. It also enables the images to be stored to the local database of your personal computer allowing database management to operate efficiently. Physicians can utilize the software tools for researching, teaching, teleconferencing and online collaboration.
The ExamVue PACS is a software solution for the storage, sharing, display and vi
The ExamVue PACS is a software solution for the storage, sharing, display and viewing for diagnosis of medical images. It consists of two software components, a central database and server software that holds, receives and distributes images, and a viewer program that can be installed on multiple computers for viewing, modifying, making measurements on, and displaying the images in the database.
The ExamVue PACS is a software solution for the storage, sharing, display and vi
The ExamVue PACS is a software solution for the storage, sharing, display and viewing for diagnosis of medical images. It consists of two software components, a central database and server software that holds, receives and distributes images, and a viewer program that can be installed on multiple computers for viewing, modifying, making measurements on, and displaying the images in the database.
VARO Plan Software is a stand-alone Windows-based software application to suppor
VARO Plan Software is a stand-alone Windows-based software application to support the treatment planning for dental implantation. It is designed for qualified dental practitioners, including dentists and lab technicians. The software imports the medical image dataset of the patient in DICOM format from medical CT or dental CBCT scanners for pre-operative planning and simulation of dental placement. It is intended for use as pre-operative planning software for the placement of dental implant(s) based on imported CT image data, optionally aligned to an optical 3D surface scan. Virtual Crowns can be used for optimized implant positioning under the prosthetic aspect. The digital three dimensional model of a surgical guide for a guided surgery can be designed based on the approved implant position. This 3D data can be exported to manufacture a separate physical product. Indications of the dental implants do not change with guided surgery compared to conventional surgery. Use of the software requires that the user has the necessary medical training in implantology and surgical dentistry.
DentiqAir is a software application for the visualization and segmentation of im
DentiqAir is a software application for the visualization and segmentation of imaging information of the oral-maxillofacial region. The imaging data originates from medical scanners such as CT or CBCT scanners. The software is intended to create design outputs to fabricate intraoral mandibular advancement devices used for the reduction of snoring. The dental professionals' planning data may be exported from DentiqAir and used as input data for CAD or Rapid Prototyping Systems. Output of DentiqAir has not been 510(k) cleared yet. The export of the device design file should only be sent to manufacturer who hold a 510(k) for intraoral mandibular advancement devices using DentiqAir software. The manufacture of the device should occur as per the design specifications provided within the 510(k) clearance.
DentiqGuide is a software device used to pre-operatively plan the placement of a
DentiqGuide is a software device used to pre-operatively plan the placement of a dental implant and to visualize a patient’s CT image optionally aligned to an optical 3D surface data. Virtual crowns can be used to guide the planning under the final prosthetic aspect. The surgical guide data can be designed then exported to an external system for manufacturing. Key Lock.
Dentiq3D is a 3D visualization software for the analysis of various dental CT da
Dentiq3D is a 3D visualization software for the analysis of various dental CT data. Dentiq3D provides intuitive and real-time 3D volume processing functions.
EzDent-i is dental imaging software that is intended to provide diagnostic tools
EzDent-i is dental imaging software that is intended to provide diagnostic tools for maxillofacial radiographic imaging. These tools are available to view and interpret a series of DICOM compliant dental radiology images and are meant to be used by trained medical professionals such as radiologist and dentist. EzDent-i is intended for use as software to acquire, view, save 2D image files, and load DICOM project files from panorama, cephalometric, and intra-oral imaging equipment.
Ez3D-i is dental imaging software that is intended to provide diagnostic tools f
Ez3D-i is dental imaging software that is intended to provide diagnostic tools for maxillofacial radiographic imaging. These tools are available to view and interpret a series of DICOM compliant dental radiology images and are meant to be used by trained medical professionals such as radiologist and dentist. Ez3D-i is intended for use as software to load, view and save DICOM images from CT, panorama, cephalometric and intraoral imaging equipment and to provide 3D visualization, 2D analysis, in various MPR (Multi-Planar Reconstruction) functions.