A special cover worn on the hands of a wheelchair occupant designed to protect t
A special cover worn on the hands of a wheelchair occupant designed to protect their hands when propelling wheels that are equipped with rims; this may also apply to wheelchairs that are fully- or partially-powered. The cover may be designed for different activities. This is a reusable device.
An electrically-powered device designed to supply an electrical charge, via a di
An electrically-powered device designed to supply an electrical charge, via a direct/wired or wireless connection, to an external parent device or external battery pack to recharge it for operation.
A device designed to provide a continuous supply of electrical power where the v
A device designed to provide a continuous supply of electrical power where the voltage output can be varied using a potentiometer. This device will typically be found in maintenance units where medical device repair and testing is performed.
A small electrically-powered convection heater intended to be mounted on the arm
A small electrically-powered convection heater intended to be mounted on the armrest or tray of a wheelchair to warm the air around the hands of the wheelchair occupant. It may be powered by a connection to a powered wheelchair and may be supplied with a cover-like device intended to be placed around the hands to restrict the area of air to be heated.
A device designed to assist a person with a disability in the techniques of sele
A device designed to assist a person with a disability in the techniques of selecting the correct input device in order to operate a connected primary device.
A device used for controlling connected electrical devices that are programmed t
A device used for controlling connected electrical devices that are programmed to function/operate at or between set intervals of time.
A device that is attached to a wheelchair and used to mount accessories for whee
A device that is attached to a wheelchair and used to mount accessories for wheelchair customization or to adapt to new requirements.
A padded and contoured device designed to attach to the back of a wheelchair to
A padded and contoured device designed to attach to the back of a wheelchair to provide the wheelchair occupant with head and trunk postural support and comfort.
A padded and contoured device designed to attach to the back of a wheelchair to
A padded and contoured device designed to attach to the back of a wheelchair to provide the wheelchair occupant with head and trunk postural support and comfort.
A padded and contoured device designed to attach to the back of a wheelchair to
A padded and contoured device designed to attach to the back of a wheelchair to provide the wheelchair occupant with head and trunk postural support and comfort.
A wheelchair accessory is a device intended for medical purposes that is sold se
A wheelchair accessory is a device intended for medical purposes that is sold separately from a wheelchair and is intended to meet the specific needs of a patient who uses a wheelchair. The Walker Holder is an accessory that mounts to a medical device to hold walkers.
A wheelchair accessory is a device intended for medical purposes that is sold se
A wheelchair accessory is a device intended for medical purposes that is sold separately from a wheelchair and is intended to meet the specific needs of a patient who uses a wheelchair. The Oxygen Holder is an accessory that attaches to a medical device to hold an oxygen tank.
M3D two-tube wheelchair mount with curved tube. RotLok base with swivel function
M3D two-tube wheelchair mount with curved tube. RotLok base with swivel function and UDS-DC. Dimensions (height x offset x tube 2): 860 x 300 x 400 mm (34 x 12 x 16"). Max. load capacity: 3.0 kg (6.6 lbs). Frame clamp not included.
M3D two-tube wheelchair mount with curved tube. RotLok base with swivel function
M3D two-tube wheelchair mount with curved tube. RotLok base with swivel function and UDS-DC. Dimensions (height x offset x tube 2): 760 x 300 x 400 mm (30 x 12 x 16"). Max. load capacity: 3.0 kg (6.6 lbs). Frame clamp not included.
M3D two-tube wheelchair mount with curved tube. RotLok base with swivel function
M3D two-tube wheelchair mount with curved tube. RotLok base with swivel function. Dimensions (height x offset x tube 2): 660 x 230 x 400 mm (26 x 9 x 16"). Max. load capacity: 3.0 kg (6.6 lbs). Frame clamp not included.
M3D wheelchair mount with the longest reach and the most stability. Tube lengths
M3D wheelchair mount with the longest reach and the most stability. Tube lengths 500 x 500 x 400 mm (20 x 20 x 16"). UDS-DC and additional 300 mm (12") tube included. Max. load capacity: 6.0 kg (13.2 lbs). Frame clamp not included.
M3D wheelchair mount ideal for eye-tracking devices. Tube lengths 300 x 500 x 40
M3D wheelchair mount ideal for eye-tracking devices. Tube lengths 300 x 500 x 400 mm (12 x 20 x 16"). UDS-DC and additional 500 mm (20") tube included. Max. load capacity: 6.0 kg (13.2 lbs). Frame clamp not included.
M3D wheelchair mount with a RotLok base for extra stability (e.g. mounting on th
M3D wheelchair mount with a RotLok base for extra stability (e.g. mounting on the left side). Tube lengths: 200 x 500 x 400 mm (8 x 20 x 16"). Max. load capacity: 3.0 kg (6.6 lbs). Frame clamp not included.
M3D wheelchair mount including a UDS, 3D adjustable joints and a lockable swivel
M3D wheelchair mount including a UDS, 3D adjustable joints and a lockable swivel unit with QuickShift levers. Tube lengths: 200 x 500 x 400 mm (8 x 20 x 16"). Max. load capacity: 3.0 kg (6.6 lbs). Frame clamp not included.
M3D wheelchair mount including a UDS, 3D adjustable joints and a simple swivel u
M3D wheelchair mount including a UDS, 3D adjustable joints and a simple swivel unit. Tube lengths: 200 x 500 x 400 mm (8 x 20 x 16"). Max. load capacity: 3.0 kg (6.6 lbs). Frame clamp not included.
M3D two-tube wheelchair mount with long range. RotLok base with swivel function
M3D two-tube wheelchair mount with long range. RotLok base with swivel function and UDS-DC. Tube lengths: 500 x 500 mm (20 x 20"). Additional 300 mm tube included. Max. load capacity: 3.0 kg (6.6 lbs). Frame clamp not included.
M3D two-tube wheelchair mount with short range. Base with swivel function and Qu
M3D two-tube wheelchair mount with short range. Base with swivel function and QuickShift levers on all components. Tube lengths: 400 x 300 mm (16 x 12"). Max. load capacity: 3.0 kg (6.6 lbs). Frame clamp not included.