Decrease waste and reduce your overall cost with MIXPAC T-Mixer HP Mixing Tips!
Decrease waste and reduce your overall cost with MIXPAC T-Mixer HP Mixing Tips! New technology provides a high mixing quality achieving more homogenous results. 100% compatible with original MIXPAC products. Tips available with color-trademarked domes consistent with the domes on standard MIXPAC mixing tips. Fits 4:1 or 10:1 cartridges.
4:1 Mixing Tips for use with Luxatemp and other temporary crown and bridge mater
4:1 Mixing Tips for use with Luxatemp and other temporary crown and bridge materials. Blue/orange.
offers tremendous advantages over the standard automix gun technique. Start usin
offers tremendous advantages over the standard automix gun technique. Start using BFC Syringes and:Stop trying to maneuver and control bulky mixing guns.Stop having to assemble or change intraoral tips, mixing tips, cartridges, and dispensing guns for every small impression.Stop wasting expensive material left over inside large mixing tips.Stop cross-contaminating entire impression material cartridges.With BFC Syringes, minimize material waste by using only the amount you need: half-full is enough to record one crown prep, and full is enough for three preps. Their cost, even loaded with impression material, is less than the cost of most automix tips alone! Factor in the mixing tip, wasted VPS material (1.6cc) and cleanup time, and you save nearly $2 per impression using BFC syringes. BFC's disposable design eliminates cross-contamination and time-consuming, messy cleanups.For the ultimate in chairside efficiency, keep a batch of BFC Syringes preloaded and ready to use.To load, simply place any HP impression material cartridge against the BFC Syringe double barrel and squeeze. After loading, push the plunger in partially, then slide the top over to the tab for an airtight seal. When ready to use the syringe, break the tab by sliding the top all the way over and go!With a rotatable angled tip, BFC Syringes give you full control in hard-to-reach areas, including the distal surfaces of second molars. The 1.5mm tip diameter allows direct access to the entire sulcus, minimizing air bubbles at the margin and virtually eliminating the need for retakes. Super-light 0.3 oz. weight and plunger-style syringing help alleviate hand stress.
HP Universal Mixing Tips fit 50ml high-performance round flange dual cartridges.
HP Universal Mixing Tips fit 50ml high-performance round flange dual cartridges. 48 tips per bag in color-coded sizes. Specify 5.2mm (pink), owhen ordering.
HP Universal Mixing Tips fit 50ml high-performance round flange dual cartridges.
HP Universal Mixing Tips fit 50ml high-performance round flange dual cartridges. 48 tips per bag in color-coded sizes. Specify 4.2mm (yellow) when ordering.
HP Universal Mixing Tips fit 50ml high-performance round flange dual cartridges.
HP Universal Mixing Tips fit 50ml high-performance round flange dual cartridges. 48 tips per bag in color-coded sizes. Specify 6.5mm (green),
Making a great impression is now easier and faster than ever with our BFC3 Power
Making a great impression is now easier and faster than ever with our BFC3 Powered Impression Gun. BFC3 (Better Faster Comfort, Control, Compatibility) dispenses any type of 1:1 or 2:1 automix material at the press of a button. Fills an entire full-arch tray in less than 10 seconds. No repetitive trigger squeezing to wear out your hand and throw off your aim. Works with standard 25ml, 50ml, and 75ml cartridges. Rechargeable battery dispenses up to sixty 50ml cartridges on a full charge. Convenient, user-friendly, handheld design fits smoothly into normal practice workflow.Familiar, ergonomic design similar to manual automix guns.Fills a full-arch tray in less than 10 seconds.Variable flow speed control, from 0.6 to 1.7ml/sec.Auto-reverse anti-drip control.Auto-stop with overload protection when cartridge is empty.Ideal for filling a batch of original BFC syringes with light-body material.Low battery LED indicator.Wall charger features full-charge indicator LED and overcharge protection circuitry.US Patent Pending.Specifications:Flow range: Adjustable from 0.6 to 1.7ml/sec.Speed: 30.8 seconds to dispense a single full 50ml heavy-body VPS cartridge Capacity: Single 25ml, 50ml, or 75ml 1:1 automix cartridgeBattery: 11.1V lithium-ion Battery life: 60 full 50ml heavy-body VPS cartridges on a full charge Recharge time: 2-1/2 hours Weight: 28.1 oz. (without cartridge)System includes BFC3 impression gun, 50ml plunger (for use with both 25ml and 50ml cartridges), 75ml plunger, wall charger, and countertop stand.Made in USA of US and imported parts. One year warranty.
Hema-Glu is a dental desensitizing agent to be placed under dental cements or ot
Hema-Glu is a dental desensitizing agent to be placed under dental cements or other restorative materials to desensitize and aid bonding primers in penetrating etched dentin.
Fluoride containing dentin cleaning agent to desensitize and clean a prepared to
Fluoride containing dentin cleaning agent to desensitize and clean a prepared tooth prior to placement of an amalgam restoration or placement of a crown &/or bridge.
The University College Kit includes 1 syringe Ultra Band Lok Blue, 1 syringe Lig
The University College Kit includes 1 syringe Ultra Band Lok Blue, 1 syringe Light Bond bracket adhesive, 1 x 2ml bottle Assure Plus Universal Bonding Resin, 1 x Flowtain syringe for lingual retention, Ortho FlexTech and Bond A Braid Lingual retainer wires and Technical Bonding Cards
Assure Plus resin is intended to increase adhesion to normal, atypical (wet or d
Assure Plus resin is intended to increase adhesion to normal, atypical (wet or dry) enamel surfaces including: hypocalcified, fluorosed,deciduous enamel and dentin. It will bond to roughened metal (amalgam, gold or stainless steel), porcelain, zirconia, composite restorations, acrylic temporary/pontic teeth.This is a Unidose dispensing system. Single unidose capsule
Assure Plus resin is intended to increase adhesion to normal, atypical (wet or d
Assure Plus resin is intended to increase adhesion to normal, atypical (wet or dry) enamel surfaces including: hypocalcified, fluorosed,deciduous enamel and dentin. It will bond to roughened metal (amalgam, gold or stainless steel), porcelain, zirconia, composite restorations, acrylic temporary/pontic teeth.This is a Unidose dispensing system.
Assure Plus resin is intended to increase adhesion to normal, atypical (wet or d
Assure Plus resin is intended to increase adhesion to normal, atypical (wet or dry) enamel surfaces including: hypocalcified, fluorosed,deciduous enamel and dentin. It will bond to roughened metal (amalgam, gold or stainless steel), porcelain, zirconia, composite restorations, acrylic temporary/pontic teeth.This is a Unidose dispensing system.
The Reliance S.E.P.™ is a self etching primer refill cartridge intended to be us
The Reliance S.E.P.™ is a self etching primer refill cartridge intended to be used for the preparation of an enamel surface of a tooth prior to bonding with a light cure orthodontic adhesive.
The Reliance S.E.P.™ is a self etching primer Kit intended to be used for the p
The Reliance S.E.P.™ is a self etching primer Kit intended to be used for the preparation of an enamel surface of a tooth prior to bonding with a light cure orthodontic adhesive.S.E.P Starter Kit – Ref# SEPPROS.E.P. Refill Cartridge -Ref# SEPR Light Impervious Mixing Well – Ref# SEPW Microbrushes -Ref# MB S.E.P Dispenser -Ref# SEPD
The Reliance S.E.P.™ is a self etching primer dispenser is intended to be used f
The Reliance S.E.P.™ is a self etching primer dispenser is intended to be used for the delivery of the primer in preparation of an enamel surface of a tooth prior to bonding with a light cure orthodontic adhesive.
The Reliance S.E.P.™ is a self etching primer Kit intended to be used for the p
The Reliance S.E.P.™ is a self etching primer Kit intended to be used for the preparation of an enamel surface of a tooth prior to bonding with a light cure orthodontic adhesive.S.E.P College Kit – 1x S.E.P. Refill Cartridge -Ref# SEPR Light Impervious Mixing Well – Ref# SEPW 50 x Microbrushes -Ref# MB S.E.P Dispenser -Ref# SEPD
Rely•a•Bond® is intended for use in bonding metal, composite and ceramic orthodo
Rely•a•Bond® is intended for use in bonding metal, composite and ceramic orthodontic brackets. Rely•a•Bond® is a No Mix Bonding System that sets on contact. Unlike powder/liquid and paste/paste systems, no mixing is required. Therefore, the operator controls the set time and reduces product waste. Kit contains 14g Adhesive Paste (tips), 16g Primer, etchant (liquid or gel) 9g, mixing pad, spatulas and brushes.
Rely•a•Bond® is intended for use in bonding metal, composite and ceramic orthodo
Rely•a•Bond® is intended for use in bonding metal, composite and ceramic orthodontic brackets. Rely•a•Bond® is a No Mix Bonding System that sets on contact. Kit contains. 14g Adhesive Paste ( tips), 16g Primer, etchant (liquid or gel), mixing pad, spatulas and brushes. This is a No Fluoride Kit in Tips
Rescue is intended as an aid for bonding to enamel, composite, porcelain, plasti
Rescue is intended as an aid for bonding to enamel, composite, porcelain, plastic and metal surfaces. Kit contains: 1 X 6ml Assure Universal Bonding Resin, 1 X 8cc Porcelain Conditioner, 1 X 10cc Plastic Conditioner, 1 X 7g Porcelain Etchant, 1 X 3cc Barrier Gel
Quick Cure is intended for use as a light cure bracket adhesive. Quick Cure kit
Quick Cure is intended for use as a light cure bracket adhesive. Quick Cure kit contains 20g Quick Cure paste in tips, 1 X 6cc Assure Plus Bonding resin, 1 X 23g Etchant and mixing accessories
Quick Cure is intended for use as a light cure bracket adhesive. Kit contains 20
Quick Cure is intended for use as a light cure bracket adhesive. Kit contains 20gm. Quick Cure paste in tips, 1 X 6ml Assure Universal Bonding Resin and 1 X 9g liquid etch and mixing accessories
Quick Cure is intended for use as a light cure bracket adhesive. This Quick Cure
Quick Cure is intended for use as a light cure bracket adhesive. This Quick Cure kit contains 4 X 5g Quick Cure Paste in push Syringes, 1 X 6cc Assure Plus Bonding Resin, 1 X 23g Etchant and mixing accessories Contains fluoride
Quick Cure is intended for use as a light cure bracket adhesive. This Quick Cure
Quick Cure is intended for use as a light cure bracket adhesive. This Quick Cure Kit contains 20gm. of Quick Cure adhesive paste in Push syringes, 1 X 6ml Assure Universal Bonding Resin and 1 X 9g etch with mixing accessories.
Phase II is intended for use in direct and indirect bonding of orthodontic brack
Phase II is intended for use in direct and indirect bonding of orthodontic brackets and appliances.The highly-filled paste provides a strong mechanical bond with metal and ceramic bracket bases.Kit contains: 18g Catalyst Paste A with fluoride, 18g Base Paste B, 7g Bonding Resin A with fluoride &B, 9g Liquid Etchant, mixing pad, spatulas, disposable brushes. This is a Fluoride kit with Screw Syringe Dispensing.
Assure® Plus All Surface Bonding Resin is intended to increase adhesion to norm
Assure® Plus All Surface Bonding Resin is intended to increase adhesion to normal, atypical (wet or dry) enamel surfaces including: hypocalcified, fluorosed, deciduous enamel and dentin. It will bond to roughened metal (amalgam, gold or stainless steel), porcelain, zirconia, composite restorations, acrylic temporary/pontic teeth. Assure® Plus All Surface Bonding Resin is hydrophilic so the etched enamel can be dry or slightly contaminated with saliva. It can be used under any chemical, light cure or dual cure paste, regardless of manufacturer. 2 ml bottle size
Assure® Plus All Surface Bonding Resin is intended to increase adhesion to norma
Assure® Plus All Surface Bonding Resin is intended to increase adhesion to normal, atypical (wet or dry) enamel surfaces including: hypocalcified, fluorosed, deciduous enamel and dentin. It will bond to roughened metal (amalgam, gold or stainless steel), porcelain, zirconia, composite restorations, acrylic temporary/pontic teeth. Assure®Plus All Surface Bonding Resin is hydrophilic so the etched enamel can be dry or slightly contaminated with saliva. It can be used under any chemical, light cure or dual cure paste, regardless of manufacturer. 6 ml bottle size
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket a
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket adhesive. Pad Lock® paste will fluoresce when illuminated with a black light to reveal flash upon bracket placement. In addition, the cured paste under the bracket base will fluoresce at the time of debonding making it easier to see and remove the adhesive.This is a Thin Viscosity Kit in Tip Dispensing. It contains (4) 4.5g Thin Paste in syringe tips, (2) 3cc Light Bond™ sealants, 9g Etching agent (liquid or gel), mixing pad, spatulas and brushes.This is a non-Fluoride Kit.
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket a
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket adhesive. Pad Lock® paste will fluoresce when illuminated with a black light to reveal flash upon bracket placement. In addition, the cured paste under the bracket base will fluoresce at the time of debonding making it easier to see and remove the adhesive.This Thin Viscosity Push Syringe kit contains:(4) 4.5g Thin Paste in push syringes, (2) 3cc Light Bond™ sealants, 9g Liquid Etching agent, mixing pad, spatulas and brushes.This is a Non-Fluoride Kit.
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket a
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket adhesive. Kit contains 18g Padlock adhesive paste in tips, 1 x 6ml Assure Plus Bonding Resin, 1 X 9 gm liquid etchant, and mixing accessories
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket a
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket adhesive. Pad Lock® paste will fluoresce when illuminated with a black light to reveal flash upon bracket placement. In addition, the cured paste under the bracket base will fluoresce at the time of debonding making it easier to see and remove the adhesiveKit contains 18g adhesive paste in syringe tips, 1 X Assure Plus Bonding Resin, 9 gm liquid etchant, mixing pad, spatulas and brush applicators.This kit contains Fluoride.
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket a
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket adhesive. Pad Lock® paste will fluoresce when illuminated with a black light to reveal flash upon bracket placement.Kit contains 18g adhesive paste in Dispensing Tips, 1 X 6cc Assure Bonding resin, 9 gm liquid etchant, mixing pad, spatulas and brush applicators.This kit contains Fluoride.
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket a
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket adhesive. Pad Lock® paste will fluoresce when illuminated with a black light to reveal flash upon bracket placement. In addition, the cured paste under the bracket base will fluoresce at the time of debonding making it easier to see and remove the adhesiveKit contains 18g adhesive paste in dispensing tips, 1 X 6cc Assure Bonding Resin, 9 gm liquid etchant, mixing pad, spatulas and brush applicators. This is a non-Fluoride Kit.
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket a
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket adhesive. Pad Lock® paste will fluoresce when illuminated with a black light to reveal flash upon bracket placement. In addition, the cured paste under the bracket base will fluoresce at the time of debonding making it easier to see and remove the adhesiveKit contains 18g Padlock adhesive paste in push syringes, 1 X 6ccAssure Plus Bonding Resin, 9 gm liquid etchant, mixing pad, spatulas and brush applicators.This kit is non-Fluoride.
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket a
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket adhesive. Pad Lock® paste will fluoresce when illuminated with a black light to reveal flash upon bracket placement. In addition, the cured paste under the bracket base will fluoresce at the time of debonding making it easier to see and remove the adhesiveKit contains 18g adhesive paste in push syringes, 1 X Assure Plus Bonding Resin, 9 gm liquid etchant, mixing pad, spatulas and brush applicators.This kit contains Fluoride.
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket a
Pad Lock® is intended for use as a fluorescing, light cure orthodontic bracket adhesive. Pad Lock® paste will fluoresce when illuminated with a black light to reveal flash upon bracket placement. In addition, the cured paste under the bracket base will fluoresce at the time of debonding making it easier to see and remove the adhesiveKit contains 18g Padlock adhesive paste in push syringes, 1 X 6cc Assure Plus Bonding Resin, 9 gm liquid etchant, mixing pad, spatulas and brush applicators.This kit is Non-Fluoride.
Phase II is intended for use in direct and indirect bonding of orthodontic brack
Phase II is intended for use in direct and indirect bonding of orthodontic brackets and appliances.The highly-filled paste provides a strong mechanical bond with metal and ceramic bracket bases.Kit contains: 18g Catalyst Paste A with fluoride, 18g Base Paste B, 7g Bonding Resin A with fluoride &B, 9g Liquid Etchant, mixing pad, spatulas, disposable brushes. This is a Fluoride kit with Jar Dispensing.
L.C.R™is a flowable, light cure orthodontic adhesive intended to be used within
L.C.R™is a flowable, light cure orthodontic adhesive intended to be used within an orthodontic, dental or pediatric dental office for the bonding of lingual retainers, creation of occlusal buildups and for retention of thermoplastic aligners.This LCR kit contains 20gm LCR Adhesive paste in tips, 1 x 6cc Assure Universal Bonding Resin, 23 g Liquid Etching Agent and Mixing accessories.
L.C.R™is a flowable, light cure orthodontic adhesive intended to be used within
L.C.R™is a flowable, light cure orthodontic adhesive intended to be used within an orthodontic, dental or pediatric dental office for the bonding of lingual retainers, creation of occlusal buildups and for retention of thermoplastic aligners. This LCR kit contains 20 gm adhesive paste in push syringes, 23 gm Liquid Etchant & Assure Plus Bonding Resin with mixing accessories.
L.C.R™is a flowable, light cure orthodontic adhesive intended to be used within
L.C.R™is a flowable, light cure orthodontic adhesive intended to be used within an orthodontic, dental or pediatric dental office for the bonding of lingual retainers, creation of occlusal buildups and for retention of thermoplastic aligners. This LCR kit contains 20 gm adhesive paste in push syringes, 23 gm Liquid Etchant & Assure Bonding Resin with mixing accessories.
Enhance™ L.C. is intended for use as a light cure adhesion booster to: fluorosed
Enhance™ L.C. is intended for use as a light cure adhesion booster to: fluorosed, hypocalcified or deciduous enamel, saliva contaminated enamel, enamel where maximum adhesion is required,metal surfaces (gold, amalgam, stainless steel) and acrylic, porcelain or composite restorations.
Light Bond is intended for use as a light cure bracket and lingual retainer adhe
Light Bond is intended for use as a light cure bracket and lingual retainer adhesive. Light Bond™ will bond to any enamel, porcelain, composite or metal surface, when properly conditioned.This kit contains 20g Light Bond Adhesive Paste in tips, 1 X 6ml Assure Bonding resin, 1 X 23g etchant and mixing accessories. This kit contains fluoride.
Light Bond is intended for use as a light cure bracket and lingual retainer adhe
Light Bond is intended for use as a light cure bracket and lingual retainer adhesive. Light Bond™ will bond to any enamel, porcelain, composite or metal surface, when properly conditioned.This kit contains 4 X 5g screw syringes of Light Bond Blue Adhesive Paste, 2 X 3cc Light Bond Sealant, 1 X 23g etchant and mixing accessories. This kit contains fluoride.
Light Bond is intended for use as a light cure bracket and lingual retainer adhe
Light Bond is intended for use as a light cure bracket and lingual retainer adhesive. Light Bond™ will bond to any enamel, porcelain, composite or metal surface, when properly conditioned.This kit contains 20g Light Bond Adhesive Paste in tips, 1 X 6ml Assure Plus Bonding resin, 1 X 23g liquid etchant and mixing accessories. This kit contains fluoride.