Device Description : The reusable BE 131 One-Way Valve is designed for use in any breathing circuit o (View more) The reusable BE 131 One-Way Valve is designed for use in any breathing circuit or ventilatory system where "back flow" must be avoided. It is designed to prevent the flow of gas back toward the source.The device includes a silicone rubber connector with 22mm I.D. Inlet. (View less)

Device Description : The BE 139 Pressure Adapter: Dimensions - Barbed port fits 3/16" I.D. tubing x (View more) The BE 139 Pressure Adapter: Dimensions - Barbed port fits 3/16" I.D. tubing x 15mm I.D./22mm O.D. x 15mm O/D. (View less)

Device Description : Reducing Adapter for use in breathing/ventilator circuit. - 15mm O.D. x 15mm I.D (View more) Reducing Adapter for use in breathing/ventilator circuit. - 15mm O.D. x 15mm I.D./22mm O.D. Molded of polycarbonate. Reusable. (View less)

Device Description : The reusable BE 142 is designed for use with ventilators, anesthesia machines, r (View more) The reusable BE 142 is designed for use with ventilators, anesthesia machines, resuscitators, and other systems where PEEP or CPAP is required. A threshold-like resistance is applied after active exhalation. The PEEP valve prevents the exhalation pressure from dropping below a pre-determined value. PEEP ranges are adjustable from 3 to 20cm of water. Maximum PEEP can vary +/-10%. Objectives of PEEP therapy: 1) increase functional residual capacity by maintaining a positive pressure throughout the ventilatory cycle - improves gas distribution,2) aid in the prevention of atelectasis via aveolar stinting, 3) decrease in the inspired oxygen fraction (FiO2) is an advantage, 4) help in the stabilization of flail chest condition, and 5) monitor tidal volume by connecting a spirometer to the outlet port. (View less)

Device Description : The reusable BE 142-A is designed for use with ventilators, anesthesia machines (View more) The reusable BE 142-A is designed for use with ventilators, anesthesia machines, resuscitators, and other systems where PEEP or CPAP is required. A threshold-like resistance is applied after active exhalation. The PEEP valve prevents the exhalation pressure from dropping below a pre-determined value. PEEP ranges are adjustable from 3 to 20cm of water. Maximum PEEP can vary +/-10%. Objectives of PEEP therapy: 1) increase functional residual capacity by maintaining a positive pressure throughout the ventilatory cycle - improves gas distribution,2) aid in the prevention of atelectasis via aveolar stinting, 3) decrease in the inspired oxygen fraction (FiO2) is an advantage, 4) help in the stabilization of flail chest condition, and 5) monitor tidal volume by connecting a spirometer to the outlet port. (View less)

Device Description : The BE 145-1522P Hose Connector: Dimensions - 15mm I.D/22mm O.D. x tapered barb adapter

Device Description : The BE 145-2230P Hose Connector: Dimensions - 22mm I.D/30mm O.D. x tapered barb adapter

Device Description : The BE 145-2P Hose Connector: Dimensions - 15mm O.D. x tapered barb adapter

Device Description : The Instrumentation Industries, Inc. BE 148-1 Gauge Adapter changes 1/4" NPT con (View more) The Instrumentation Industries, Inc. BE 148-1 Gauge Adapter changes 1/4" NPT connection to 1/8" small bore tubing connection.The BE 148-1 is designed to work with III Vacuum/Pressure Gauges and NIF Meters.The adapter is made of polycarbonate. (View less)

Device Description : The BE 148-4 Cuff Pressure Monitor Adapter attaches to NS Series gauges with a 1 (View more) The BE 148-4 Cuff Pressure Monitor Adapter attaches to NS Series gauges with a 1/4" NPT fitting to create a Cuff Pressure Monitor. During ventilation, the NS Series Cuff Pressure Monitors are devices used to periodically monitor endotracheal or tracheostomy tube balloon pressure to assure an adequate seal between the tube and the tracheal wall.These devices are intended to be used by or on the order of a physician. (View less)