Device Description : The SuperBar is a high quality, commercial grade pivoting and locking horizontal (View more) The SuperBar is a high quality, commercial grade pivoting and locking horizontal bar that connects to the SuperPole (floor to ceiling safety pole). The horizontal bar can be lifted, pivoted and lowered to the next locking position around the SuperPole. The SuperBar is intended for moderate vertical and horizontal load bearing to provide sitting and standing support for people with reduced mobility. The SuperBar is installed onto the SuperPole by securing a castellated collar to the pole with 3 cone point set screws. The set screws pierce into the pole and lock the collar in place, and the spring ring is used to prevent the set screws from back-threading. The castellated collar has 8 grooves (every 45 degrees) to provide a mechanism strong enough for the SuperBar to support the user. It is important to set proper height and orientation of the SuperBar to optimize the user’s range of motion. The floor to ceiling range and maximum user weight dependent on model. Note: Product is not intended to support full body weight. The SuperBar is only to be used with HealthCraft’s SuperPole System. The SuperBar is not to be used with the SuperPole Ultra. The SuperBar is not to be used in any other way than described above. Floor To Ceiling Height 93-99" / 2362-2515mm Max User Weight300lbs / 136kgs The SuperBar is made from robust materials and is capable of supporting vigorous forces during proper / normal usage. The structural components of the pole are made from metal. The plastic bushings of the SuperBar allow the horizontal bar to be rotated without marking or damaging the pole. The top plate and base plate can be easily separated from the pole by use of multiple use fasteners (clevis and cotter pin).The non-latex grip provides both comfort and traction for the hand. The top plate can be secured to the structural ceiling joist with wood screws:- if regular inspection (and if necessary, tightening) cannot be done- if pole is subjected to aggressive usage (View less)

Device Description : The SuperPole is intended for moderate vertical and horizontal load bearing to p (View more) The SuperPole is intended for moderate vertical and horizontal load bearing to provide sitting and standing support for people with reduced mobility. The SuperPole is installed between a structural floor and ceiling by turning a jackscrew at the bottom of the pole. The pressure created by the jackscrew is strong enough for the SuperPole to support the user, yet it does not require drilling holes into the floor or ceiling. This is ideal for relocating or removing the pole. The floor to ceiling range and maximum user weight dependent on model. The SuperPole is made from robust materials and is capable of supporting vigorous forces during proper / normal usage. The structural components of the pole are made from metal. The components of the pole that make direct contact with the floor and ceiling are made of non-slip rubber to protect the surfaces from damage, as well as provide traction. The top plate and base plate can be easily separated from the pole by use of multiple use fasteners (clevis and cotter pin).The top plate can be secured to the structural ceiling joist with wood screws: - if regular inspection (and if necessary, tightening) cannot be done - if pole is subjected to aggressive usage (View less)

Device Description : The SuperPole is a high quality, commercial grade floor to ceiling safety pole. (View more) The SuperPole is a high quality, commercial grade floor to ceiling safety pole. The SuperPole is intended for moderate vertical and horizontal load bearing to provide sitting and standing support for people with reduced mobility. The SuperPole is installed between a structural floor and ceiling by turning a jackscrew at the bottom of the pole. The pressure created by the jackscrew is strong enough for the SuperPole to support the user, yet it does not require drilling holes into the floor or ceiling. This is ideal for relocating or removing the pole. The floor to ceiling range and maximum user weight dependent on model. Note: Product is not intended to support full body weight.The SuperPole is not to be used in any other way than described above. The SuperPole is made from robust materials and is capable of supporting vigorous forces during proper / normal usage. The structural components of the pole are made from metal. The components of the pole that make direct contact with the floor and ceiling are made of non-slip rubber to protect the surfaces from damage, as well as provide traction. The top plate and base plate can be easily separated from the pole by use of multiple use fasteners (clevis and cotter pin). The top plate can be secured to the structural ceiling joist with wood screws: - if regular inspection (and if necessary, tightening) cannot be done - if pole is subjected to aggressive usage - if using SuperPole Heavy Duty (SP-HD) (View less)

Device Description : The SuperPole Ultra is a high quality, commercial grade floor to ceiling safety (View more) The SuperPole Ultra is a high quality, commercial grade floor to ceiling safety pole (intended usage same as SuperPole). The SuperPole Ultra is intended for applications with floor to ceiling ranges from 121-140" / 3073-3556mm. The SuperPole Ultra is not to be used with the SuperBar, SuperTrapeze, Angled Ceiling Plate or Uni-Fit Extender. The SuperPole Ultra parts (pole, extension tube and top plate - labelled for convenience) should not be used with the components of any other floor to ceiling poles. (View less)

Device Description : The Ceiling Plate Extender (CPE) is a high quality, commercial grade installatio (View more) The Ceiling Plate Extender (CPE) is a high quality, commercial grade installation accessory to be used with the SuperPole. The CPE is intended to increase the top plate span of the SuperPole from 20-30" / 508-762mm. It can be used when the SuperPole is expected to be subjected to more aggressive use, or where structural ceiling joists have increase spacing (such as 24"/610mm between centers). The CPE is only to be used with HealthCraft’s SuperPole System. The CPE is not to be used with the Angled Ceiling Plate. (View less)

Device Description : The SuperPole is a high quality, commercial grade floor to ceiling safety pole. (View more) The SuperPole is a high quality, commercial grade floor to ceiling safety pole. The SuperPole must be installed between a structural floor and ceiling by turning a jackscrew at the bottom of the pole. The pressure created by the jackscrew is strong enough for the SuperPole to support the user, yet it does not require drilling holes into the floor or ceiling. This is ideal for relocating or removing the pole. NOTE: The top plate has two holes that may be used to fix the plate directly to the ceiling joist if necessary. Do not install the pole where it is directly exposed to water. (View less)

Device Description : Custom cut to length.The SuperPole is a high quality, commercial grade floor to (View more) Custom cut to length.The SuperPole is a high quality, commercial grade floor to ceiling safety pole. The SuperPole must be installed between a structural floor and ceiling by turning a jackscrew at the bottom of the pole. The pressure created by the jackscrew is strong enough for the SuperPole to support the user, yet it does not require drilling holes into the floor or ceiling. This is ideal for relocating or removing the pole. NOTE: The top plate has two holes that may be used to fix the plate directly to the ceiling joist if necessary. Do not install the pole where it is directly exposed to water. (View less)

Device Description : The SuperPole is a high quality, commercial grade floor to ceiling safety pole. (View more) The SuperPole is a high quality, commercial grade floor to ceiling safety pole. The SuperPole must be installed between a structural floor and ceiling by turning a jackscrew at the bottom of the pole. The pressure created by the jackscrew is strong enough for the SuperPole to support the user, yet it does not require drilling holes into the floor or ceiling. This is ideal for relocating or removing the pole. NOTE: The top plate has two holes that may be used to fix the plate directly to the ceiling joist if necessary. Do not install the pole where it is directly exposed to water. Floor To Ceiling Height 93-99" / 2362-2515mm Max User Weight 450lbs / 205kgs (View less)

Device Description : The SuperPole is a high quality, commercial grade floor to ceiling safety pole. (View more) The SuperPole is a high quality, commercial grade floor to ceiling safety pole. The SuperPole must be installed between a structural floor and ceiling by turning a jackscrew at the bottom of the pole. The pressure created by the jackscrew is strong enough for the SuperPole to support the user, yet it does not require drilling holes into the floor or ceiling. This is ideal for relocating or removing the pole. NOTE: The top plate has two holes that may be used to fix the plate directly to the ceiling joist if necessary. Do not install the pole where it is directly exposed to water Max user weight 450lbs / 205kg. floor to ceiling range 93-99" / 2362-2515mm (View less)

Device Description : The SuperPole is a high quality, commercial grade floor to ceiling safety pole. (View more) The SuperPole is a high quality, commercial grade floor to ceiling safety pole. The SuperPole must be installed between a structural floor and ceiling by turning a jackscrew at the bottom of the pole. The pressure created by the jackscrew is strong enough for the SuperPole to support the user, yet it does not require drilling holes into the floor or ceiling. This is ideal for relocating or removing the pole. NOTE: The top plate has two holes that may be used to fix the plate directly to the ceiling joist if necessary. Do not install the pole where it is directly exposed to water. Max Ceiling height 121-140" / 3073-3556mm Max User Weight 300lbs / 136kg (View less)