Address:3700 Sagamore Pkwy N,La Fayette,IN,47904,US
Device Description : The Lafayette Hand-Held Dynamometer is an ergonomic hand-held device for objecti The Lafayette Hand-Held Dynamometer is an ergonomic hand-held device for objectively quantifying muscle strength. The device comes in an ergonomic plastic housing that fits comfortably in the palm of the hand. An elastic strap helps keep the HHD in place. The device has a LCD screen for data readout and menus for setup. The patient pushes on a stirrup accessory which is attached to the shaft of a force measuring load cell. The load cell senses the amount of force being applied to the device by the patient and this load is displayed in the LCD in pounds, kilograms or newtons. An optional test stand accessory and holder are used to position the HHD for the test.
Device Class : 1
Duns Number: 005080650
Premarket Exempt : Yes
Prescription Use : No
Device Description : The Lafayette Skinfold Caliper is an easy to use device for objective assessment The Lafayette Skinfold Caliper is an easy to use device for objective assessment of body fat composition. The device features a 0-100mm scale that allows an accurate assessment of a larger portion of the population than other calipers. The spring-loaded arms and pivoting tips adjust automatically for parallel measurement of skinfolds, and the circular tips provide comfort to the patient. The tension spring provides constant pressure over the entire operating range, meeting the pressure requirements of 10g/mm2. The caliper is lightweight, durable, and never needs calibration.
Device Class : 1
Duns Number: 005080650
Premarket Exempt : Yes
Prescription Use : No
Device Description : The Lafayette Extendable Goniometer is an angle measurement device used for accu The Lafayette Extendable Goniometer is an angle measurement device used for accurate, versatile, reliable and objective assessment of range of motion. The Extendable Goniometer features a dual scale, 1° increments, extendable and retractable arms, magnified reading window, as well as a compact, lightweight, and portable design. Its arms can extend to 28.00 inches to measure large joints and retract to 8.0 inches to measure all but the smallest joints. Unlike standard goniometers that require the examiner to estimate alignment, the length of the extendable arms allows it to lie over anatomical bony landmarks. The dual scale of 0-180° and 180-0° is magnified four times, improving the accuracy of the reading, thus, reducing the chance for error. Its lightweight ABS plastic construction will ensure continued and long lasting use.
Device Class : 1
Duns Number: 005080650
Premarket Exempt : Yes
Prescription Use : No
Device Description : The Large Bone Caliper accurately measures distance in cm. It features a fixed The Large Bone Caliper accurately measures distance in cm. It features a fixed arm and a measurement arm that slides along a scale. The scale indicates the distance between the two arms. Calipers are used to measure body characteristics such as abdominal diameter, wrist, elbow and knee widths, muscle mass, shoulder and chest width, etc. The measurements are accurate to 1mm.
Device Class : 1
Duns Number: 005080650
Premarket Exempt : Yes
Prescription Use : No
Device Description : The Small Bone Caliper accurately measures distance in cm. It features a fixed The Small Bone Caliper accurately measures distance in cm. It features a fixed arm and a measurement arm that slides along a scale. The scale indicates the distance between the two arms. Calipers are used to measure body characteristics such as abdominal diameter, wrist, elbow and knee widths, muscle mass, shoulder and chest width, etc. The measurements are accurate to 1mm.
Device Class : 1
Duns Number: 005080650
Premarket Exempt : Yes
Prescription Use : No
Device Description : The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions. The Stainless Steel Short Finger Goniometer is used for easy range-of-motion measurements of metacarpal, phalangeal, and interphalangeal joints. There are linear inch and centimeter markings on both sides of the protractors, in opposite directions. The protractors measure 0-150° in 5° increments. Stainless steel. Latex free. Clearly marked numbers make measuring easy. Measures 5.75 inches long.
Device Class : 1
Duns Number: 005080650
Premarket Exempt : Yes
Prescription Use : No
Device Description : The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions.
Device Class : 1
Duns Number: 005080650
Premarket Exempt : Yes
Prescription Use : No
Device Description : The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually.
Device Class : 1
Duns Number: 005080650
Premarket Exempt : Yes
Prescription Use : No
Device Description : The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions.
Device Class : 1
Duns Number: 005080650
Premarket Exempt : Yes
Prescription Use : No
Device Description : The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instru The Lafayette Grip or Pinch Dynamometers are hydraulic strength measuring instruments. They are designed for routine assessment of the grip and/or pinch strength of a patient or can also be used in the evaluation of hand trauma or disease. As the patient either grips or pinches the device, a column of hydraulic fluid activates a pressure gauge mounted on the top of the device. The gauge indicates the pinch or grip force in pounds (lbs) or kilogram force (kgf). A peak needle shows the maximum force applied during a single test. The peak needle is manually reset at the end of the test and peak values are recorded manually. The grip dynamometers also feature an adjustable handle that can accommodate five different grip positions. The Stainless Steel Short Finger Goniometer is used for easy range-of-motion measurements of metacarpal, phalangeal, and interphalangeal joints. There are linear inch and centimeter markings on both sides of the protractors, in opposite directions. The protractors measure 0-150° in 5° increments. Stainless steel. Latex free. Clearly marked numbers make measuring easy. Measures 5.75 inches long.
Device Class : 1
Duns Number: 005080650
Premarket Exempt : Yes
Prescription Use : No